WMF 2227911 Lumero Milk Frother User Manual

: June 3, 2024
: WMF

Table of Contents

2227911 Lumero Milk Frother
**** Important safety instructions
Prior to use
WMF milk froth DISC
Cleaning and care
Troubleshooting
For UK use only
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WMF Numero

WMF 2227911 Lumero Milk Frother

Operating Manual
Milk Frother

2227911 Lumero Milk Frother

WMF 2227911 Lumero Milk Frother - fig 1

Milk frother components

Lid
Sealing ring
Mixing arm
WMF milk froth DISC
Jug
Start/Stop button with control lamp
LED light ring
Appliance base with cable wrap

**** Important safety instructions

These devices can be used by children older than eight years old as well as by persons with limited physical, sensory or mental capabilities, persons lacking experience and/or lacking knowledge if they are supervised or have received instructions regarding how the device is to be used safely and have understood the resulting risks. Children must not play with the device. Children must not perform the cleaning and user maintenance unless they are older than eight years old and are supervised.
Keep the device and its cable out of the reach of children under eight years old.
Only operate the appliance with the appropriate base.
Never immerse the appliance in water.
Take care not to spill water on the base.
Caution! Risk of burns! The temperature of accessible surfaces can become very hot. They also remain hot for some time after the appliance has been switched off.
The mixing arm on the milk frother DISC can also get hot.
Always use the appliance in accordance with these instructions. Improper use can result in electric shocks and other hazards.
If the appliance’s connection cable is damaged then it must be replaced by the manufacturer’s central customer service department or by a similarly qualiﬁed person. Improper repairs may constitute a serious threat to users.
Clean after use all surfaces, which have got in contact with food. Follow the notes in the chapter „Cleaning and care“.

Prior to use

Read the operating manual carefully. It contains important information about the use, safety, and maintenance of the appliance.
It should be kept in a safe place and passed on to further users if appropriate.
The device may only be used for the intended purpose according to these operating instructions.
This device is meant to be used in the household and for similar applications, such as:

in kitchens, for employees in shops, ofﬁces and other commercial areas;
on the agricultural property;
from customers in hotels, motels, and other residential facilities;
in bed and breakfast establishments.

The appliance is not designed for sole commercial use.
Observe the safety instructions during use.

Technical Data

Rated voltage:	220 – 240 V~ 50-60 Hz
Power consumption:	420 – 500 W
Protection class:	I

Safety instructions

Only connect the device to properly installed earthed sockets. The wire and plug must be dry.
Do not pull the connecting cable over sharp edges or clamp it. Do not let it hang down and protect it from heat and oil.
Never disconnect the mains plug from the socket by the cord or with wet hands.
Stop using the appliance and/or connect it from the mains plug immediately if:
⋅ The appliance or mains cable is damaged;
⋅ the device is not leak-proof;
⋅ there is any suspicion of a fault after dropping the appliance or similar.
In such cases, send the appliance to be repaired.
Do not place the appliance on hot surfaces, such as hot plates or similar, or near open ﬂames. It could melt.
Do not place the device on water-sensitive surfaces. Spray may damage them.
Never operate the appliance unattended.
Do not switch on the device without milk.
Take the pot for ﬁlling from the base.
Only use the appliance to heat up or froth milk. Do not use it to process any other ingredients.
Do not move the device during operation and do not pull on the mains cable.
The underside of the jug must be dry before using the appliance.
Caution: the device is hot.
The mains plug is to be pulled:
⋅ if malfunctions occur during use,
⋅ before cleaning and care,
⋅ after use.
No liability is accepted for any damages resulting from misuse, incorrect operation, or improper repairs. Claims under warranty are likewise excluded in such cases.
Packaging materials, such as plastic ﬁlm bags, do not belong in the hands of children.

WMF milk froth DISC

The WMF milk froth DISC (4) can be removed from the appliance for easy cleaning. To do this, gently push down the WMF milk froth DISC (4) and slide it to one side.
Simply slide the WMF milk froth DISC (4) sideways into the appliance, and an internal magnet holds the DISC ﬁrmly in place.

NOTE: This product contains a light source with energy efﬁ science class F. Please note that the light element in the product is not intended for lighting purposes. The light element may be replaced by authorized service personnel.
The LED lighting (7) on the appliance base (8) is used to indicate that the appliance is in operation and when a program is selected.
Using the appliance
Before using it for the ﬁrst time, ensure the appliance is thoroughly cleaned, as detailed in the “cleaning and care” section.
Any surplus cable can be wound into the bottom of the base unit (8). Connect the mains plug to an earthed socket.

Operation and use

1. Add the required amount of milk to the jug (5) and close it with the lid (1).
2. Place the jug (5) on the base (8).
Warning:
Always place the lid (1) securely on the jug before switching it on.
Never remove the lid (1) while the appliance is running.
Note:
Preparation can be stopped at any time by lifting the jug (5) of the base (8).
Allow the appliance to cool down before reuse.
The quality and volume of the milk froth depend on the milk used (e.g. the fat and protein content, temperature, etc.).

Hot milk froth
Select this program for hot, creamy, ﬁ ne milk froth. This is particularly suitable for cappuccino or latte.

WMF 2227911 Lumero Milk Frother - fig 4

Add 100 to 150 ml of cooled milk to the jug (5) (except you can ﬁ ll up to 250 ml of hot milk).
The ﬁ ll markings are located inside the jug (5), alternatively you can also use the mixing arm (3) for guidance:
100 ml MIN, so that the WMF milk froth DISC (4) is covered.
150 ml MAX, alternatively up to the lower marking on the mixing arm.
Do not add more than that, otherwise, the milk froth will overﬂ ow and soil the appliance.
Place the lid (1) on the jug (5) and apply slight pressure to ensure a good seal. Press the Start/Stop button (6) repeatedly until the corresponding symbol lights up. Approx. 3 seconds later, the control light on the Start/Stop button (6) lights up and preparation begins automatically.
After the program ends, the appliance switches off automatically and the indicator light turns off. Remove the lid (1) and skim off the milk froth separately, or pour it out with the remaining milk.

| Creamy, soft milk froth
Select this program to get warm, creamy, ﬁ one-pored milk froth. This is particularly suitable for cappuccino or latte art.
---|---
| Strong milk froth
Select this program to get warm, consistent milk froth. This is particularly suitable for cappuccino or latte macchiato.
| Cold milk froth
Select this program for cold, creamy, milk froth. This is particularly suitable for frappé drinks, cocktails, iced coffee, and desserts.
| Hot milk
Select this program to heat milk and slightly froth it. Hot milk is particularly suitable for milky coffee, hot chocolate, and cocoa.

Cleaning and care

Clean the appliance after each use.
Unplug at the mains and allow the device to cool down.
The lid (1) and WMF milk froth DISC (4) are dishwasher-safe. for easy cleaning, the sealing ring (2) in the lid (1) can be removed.
Note: the jug (5) and base unit (8) should not be placed in the dishwasher. Never immerse the jug (5) in water or rinse it under running water.
The jug (5) can be rinsed under running water.
The inside of the jug (5) is lined with a non-stick coating. Do not use any harsh or abrasive detergents or solvents. Dry the jug (5) with a soft cloth.
Attention: before using the appliance, ensure that the jug (5) is dry underneath.
Only use a soft, damp cloth to wipe the base unit (8).

| Dishwasher safe| Can be rinsed under running water| Wipe with a damp cloth
---|---|---|---
Lid (1)| | |
The sealing ring (2)| | |
WMF milk froth DISC (4)| | |
The inside of the jug (5)| | |
Base unit (8)| | ****|

Troubleshooting

The following tips should help you to solve any problems. If the problem persists, please contact our central customer service department. Please note the warranty information.

Problem	Possible cause	Action
The control lamp is not illuminated, and the appliance does not start	The
plug is not plugged in.	Connect the plug
Overheating protection active	Allow the appliance to cool
Milk is leaking from the lid	Too much milk in the appliance	Pour out some of

the milk
The lid is not fitted properly| Gently push the lid down
The sealing ring is missing or is dirty| Clean and insert the sealing ring

For UK use only

This product is supplied with a 13 A plug conforming to BS 1363 ﬁtted to the mains lead. If the plug is unsuitable for your socket outlets or needs to be replaced, please note the following. If the plug is a non-rewireable one, cut it from the mains lead and immediately dispose of it. Never insert it into a socket outlet as there is a very great risk of an electric shock.
The replacement of the plug at the mains lead has to be done according to the following instructions:

Important: The wires in this mains lead are colored in accordance with the following code:

blue	Neutral
brown	Live

As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows:

the wire which is colored blue must be connected to the terminal which is marked with the letter N or colored black,
the wire which is colored brown must be connected to the terminal which is marked with the letter L or colored red.

Do not connect any wire to the terminal which is marked with the letter E or by the earth symbol, or colored green or green and yellow.

If a 13 A (BS 1363) plug is used it must be ﬁtted with a 13 A fuse conforming to BS 1362 and be
ASTA approved. If any other type of plug is used, the appliance must be protected by a 10 A fuse either in the plug or adapter or at the distribution board.
If in doubt – consult a qualiﬁed electrician.
Never use the plug without closing the fuse cover.

The appliance complies with European directives 2014/35/EU, 2014/30/EU, and 2009/125/EU.

At the end of its life, this product may not be disposed of in normal household waste, but must instead be taken to a collection point for recycling electrical and electronic appliances. The materials are recyclable in accordance with their labeling. Reuse, recycling, and other ways of reutilizing old appliances make an important contribution to protecting our environment. Please ask your local authorities for information about the appropriate disposal point.
End users are personally responsible for deleting any personal data that may be stored on appliances they are disposing of. Subject to change.

Consumer Service:
Tel.: +49 (0)7331 256 256
E-Mail: contact-de@wmf.com
Hersteller:
WMF GmbH
WMF Platz 1
73312 Geislingen/ Steige
Germany
wmf.com
Änderungen vorbehalten – IFU-1330 0011-03-2203
Modell 0413300011