KEMOT MSER-500 Automatic Voltage Regulator Owner’s Manual

June 5, 2024
KEMOT

KEMOT MSER-500 Automatic Voltage Regulator

KEMOT-MSER-500-Automatic-Voltage-Regulator-

Before use, read this instruction manual carefully and keep it for future reference. Producer does not claim responsibility for damages caused by inappropriate handling and use of the product.

SAFETY INSTRUCTIONS

  • Do not overload device. Operating this device with load higher than nominal may lead to damaging this device. Do not use the regulator beyond its maximum power capacity.

  • This device is designed for household and office use. Do not use this device with specialized equipment or apparatuses (e.g. industrial, medical equipment).

  • When the device is connected to any appliance with high momentary starting current, the starting power is generally several times of the appliance’s listed power rating. Make sure that the total starting power capacity of all connected appliances does not exceed the listed maximum output power capacity of the regulator. For tv set, calculate it twice as its listed capacity.

  • Make sure that the regulator is of the same output voltage and frequency as the appliances it is connected.

  • Position the device in a properly ventilated place with a suitable temperature.

  • Warning: do NOT cover the cooling fan nor vents of the device; it may lead to overheating.

  • Protect this device from water, humidity as well as sources of heat and direct sunlight.

  • Do not use this device if it is not working properly. In such case, turn the device off immediately, and disconnect from power supply.

  • Do not disassemble this device nor open the housing. Any repair can be carried out in an authorized service point exclusively.

  • In case of fire, use only dry powder extinguisher. Using water or other types of fire extinguishers can lead to electrocution.

  • Always place the regulator in an environment that is well ventilated, not exposed to direct sunlight or heat source and away from any flammable substance. Keep this product out of reach of children.

  • Disconnect this device from the power supply if it is not going to be used for a long period of time.

  • 0Fixed power cable may only be replaced in an authorized service point.

  • Power cord protection: power-supply cords should be routed so that they are not likely to be pinched by items placed upon or against them. Pay particular attention to cords, plugs, and power sockets and the point where they exit from the appliance.

  • This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner, and all the safety precautions are understood and followed. Children should not play with this device. Children should not perform cleaning and servicing of the device unsupervised.

FEATURES

  • Precise AVR with quick-response (±3% precision)
  • High quality toroidal transformer
  • Servomotor
  • LED display
  •  AVR can best protect your appliance from voltage fluctuation, ensure your appliance giving its best performance.
  • Applications: computer, lighting equipment, sound equipment, TV, office appliances, etc.

PRODUCT DESCRIPTION

Front panelKEMOT-MSER-500-Automatic-Voltage-Regulator-
fig-1

  1. Power switch (If the load current goes beyond, the device will automatically shut off. To turn it back on, reduce the load current then set the power switch to „ON”)
  2. Input voltage
  3. Output voltage
  4. Overvoltage
  5. Undervoltage
  6. Overheat
  7. Warning/Unusual operation
  8. Time icon (6 seconds default delay turn on)
  9. Normal working

Back panel

  1. Output sockets (German and French type)
  2. Circuit breaker
  3. Input

Radio frequency interference
This product may not work properly if it’s placed in vicinity of equipments using radio waves. Place this device away from such equipment to avoid electric interference.

ERROR INDICATION

| Overvoltage
---|---
****| Undervoltage
| Overheat

CLEANING

Clean this device with soft, dry cloth. Do not use any chemical agents to clean this product. Before cleaning, make sure the device is switched off and disconnected from the power supply.

SPECIFICATION

Model URZ3425 500 VA URZ3426 1000 VA
AC input voltage 130-260 VAC
AC input frequency 50 Hz
AC output voltage 230 VAC
AC output frequency 50 Hz
Precision ± 3%
Efficiency 98%
Phase single
Transformer C.R.G.O. toroidal transformer
2 output sockets german, french (polish)
Protections high temperature / high voltage / short circuit
Operation temperature 0-40°C
Humidity 10-90%
Storage temperature -15-45°C

Specifications are subject to change without prior notice

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., 1 Garwolińska Street, 08-400 Miętne.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals