BRISTAN LMN EFSNK BLK D1 Lemon Kitchen Mono Mixer User Guide
- June 15, 2024
- BRISTAN
Table of Contents
Installation Instructions & User Guide
Please leave these instructions
with the end user
Product Code: LMN EFSNK BLK (D1)
Specifications
Dynamic Water Pressure
Inlet Water Temperature
Inlet Connections
Tools You’ll Need
Servicing Your Tap
We recommend servicing your tap at least once every year to prolong its life. To see a video showing how to remove the cartridge for servicing, scan the QR code with your smart phone or tablet.
https://www.youtube.com/watch?v=yk1MXPcczFw&list=PLBJ3KqlfqAXfvNJ84iLziADB8zFzAwKiw&index=19
Alternatively visit
www.youtube.com/BristanTV
Prior to Installation
All products manufactured and supplied by Bristan are safe provided they are
installed, used correctly and receive regular maintenance in accordance with
these instructions.
This product has been tested to the Water Regulations Advisory Scheme (WRAS)
and satisfies the requirements of the Water Supply (Water Fittings)
Regulations 1999 and current bylaws.
For full Installation Requirements & Notes (IRN) please visit
wras.co.uk/directory.
Isolation valves must be fitted to the inlet water supplies to ensure ease of
future maintenance.
Before installing these taps the water supply must be thoroughly flushed in
order to remove any swarf, solder etc.
This product must not be modified in any way as this will invalidate the
guarantee.
Flexible Connecting Pipes
Pack Contents
Spare Parts
To replace any spare parts for your tap, why not scan the QR Code or visit www.bristan.com and search for your product.
http://www.bristan.com/products/Kitchen-Taps?code=LMN%20EFSNK%20C
Installation
General Cleaning
Bristan products are made from premium materials, with hand polishing and
electroplated finishes.
Your taps or shower should be regularly cleaned with warm water, a mild pH-
neutral liquid soap, and polished with a soft cloth. Any residues from soap,
toiletries etc. should be rinsed off straight after use. Household bleaches
and cleaners contain harsh chemicals and may damage the surface finish. Avoid
using abrasive cloths, scouring pads, scrub sponges, steel wool or anything
similar. Some surfaces such as nickel and pewter may be affected by the dye
found in some cloths, so it is also important to avoid hanging cloths on
spouts.
Operation
Bristan offers an effective chrome-friendly cleaning kit for use with your taps and showers. Scan the QR Code or search for ‘CLEAN KIT01’ on www.bristan.com.
Maintenance – Cleaning/Replacing Outlet
Troubleshooting
| Symptom | Cause(s) | Remedy |
|---|
No flow or IOW
flow rate| Partially closed isolation valve.| Open isolation valve.
Instantaneous water heater cycles on and off as flow rate or pressure is too
low.| Increase water flow rate or pressure through system.
Head of water is below the minimum distance required.| Refer to your the
Specification for the minimum work-ing pressure/distance required.
Hot or cold water being drawn off elsewhere causing pressure changes or
instantaneous boiler temperature changes.| Do not use other water outlets when
using the taps.
Airlock or partial blockage in the supply pipework or hoses.| Flush through
pipework to ensure removal of debris and any airlocks.
Water supply failure| Investigate water supply. Check your plumbing and
heating systems for any faults.
Water
dripping from
taps| This is normal for a short time after using the taps.| This is caused by
residual water tension. the build up of water in the tap body.
If water continues to drip.
possibly due to the ceramic disc valves/cartridge| Refer to the Maintenance
section or visit wa youtube.com/BrIstanTV to
watch the procedure.
Taps do not
turn on| Closed isolation valve.| Open isolation valve.
Mains water supply turned off.| Turn on mains water supply.
Wobbly Tap| Grub screws are not tight enough at the base| Ensure the grub
screws are fully tightened against the base
Extra security may be required depending on the surface the tap is fitted on
to.| Refer to the Alternative Installation steps in order to fit the
Reinforcing Plate.
At Bristan, we want to make things as easy as possible for our customers.
That’s why we offer solid guarantees on all our products, effective from the
date of purchase, to give you peace of mind. To start your free guarantee
simply scan the QR code and register your product. Alternatively visit
www.bristan.com/register.
For any other queries, please call our Customer Service on 0330 026 6273 where
our expert team of advisors will be able to offer you any help and advice.
For full guarantee terms and conditions visit www.bristan.com/service-
centre/guarantees.
https://www.bristan.com/service-centre/product-registration
We know & We Care
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>