Tom Raffield TR-TILO-WL-O Tilow Wall Light Instruction Manual
- June 5, 2024
- Tom Raffield
Table of Contents
Tom Raffield TR-TILO-WL-O Tilow Wall Light
INSTALLATION
Option 1 – In-line switch and plug.
- Identify if there are any hidden pipes or electrical cables in the wall to avoid causing damage or risk of electrical shock during installation. Mark the wall where the light needs to be positioned and drill two holes where you have marked (A). Determine the fixing method appropriate to the wall structure and secure the back plate to the wall using the screws provided, concealing the screws with the wooden plugs provided (B). (If you have a Titlow wall light and lampshade combination, simply attach the shade to the bulb holder once the Titlow is fixed in place as detailed in diagram 2 above.) Screw in your chosen light bulb and plug the light into the nearest outlet. The light has been designed to work with an E27 LED light bulb, up to a maximum of 25 Watts.
- Turn the power supply on to complete installation.
Option 2 – Hard wired.
Only a qualified electrician should assemble the luminaire. If in doubt, consult a suitably qualified electrician. Installation MUST be carried out in accordance and compliance with current building regulations. Ensure the electrical supply is turned OFF at the fuse board.
- The Titlow Wall Light can also be hardwired. This must be carried out by a qualified electrician. Cut the plug and excess wire to length before using a terminal block to connect the light to the supply, hiding excess wire and the connection block in the back plate or wall cavity.
- Follow the steps in option 1 to complete installation.
If the external flexible cable or cord of this luminaire is damaged, it shall
be exclusively replaced by the manufacturer or his service agent or a
similarly qualified person in order to avoid a hazard.
For more information on the installation of your product:
[email protected] +44 (0)1326 722725
Read User Manual Online (PDF format)
Loading......