ZEBRONICS ZEB-BT460RUF Tower Speaker User Manual
- June 5, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-BT460RUF Tower Speaker
Features
- Wireless BT/USB/FM/AUX/MIC Input LED display
- 13.33cm Subwoofer
- Remote Control
- Karaoke
- Wired Mic
Specification
-
Output Power (RMS):5OW
Driver Size -
Subwoofer:13.33cm
-
Full range:7.62cmx2
Impedance -
Subwoofer: :8
-
Full range:4
-
Frequency response: 40Hz- 20kHz
-
S/N Ratio : ?:70dB
-
File format support : Mp3(USB)
-
Line input:2ch RCA
-
Max supported
-
USB memory size :32GB
-
FM frequency
-
scan range : 87.SMHz-108MHz
-
BT Name:Zebronics
-
BT version :4.2
-
Product Dimension :150x255x620mm (WxDxH)
-
Net. Weight : 5.07kg
Package Content
- Speaker : 1 unit
- Remote : 1 unit
- Input Cable : 1 unit
- Wired Microphone : 1 unit
Product Description
Front Panel
- Volume Control Knob
- FM/Scan
- Mode/Input
- LED Display
- Mic. Volume Control Knob
- Mic. Input Port
- Next/Fine Tune+
- Previous/Fine Tune-
- USBSlot
Back Panel
-
AUDIOINPUT(AUX)-STEREOINPUT
These jacks are used to receive the STEREO signal from a CDNCD/DVD (2CH) player. -
AC POWER-POWER ON and OFF
This turns the power of the speaker ON/OFF.
AC/IN (-230V 50/60Hz)AC Power Cord.
Remote Control
- Standby: Power ON/OFF
- Mode Selection: BT/AUX/USB/FM
- RPT : To Switch between REP Alltracks or REP 1 track
- Prev : To select the previous songs in BT/USB or channels in FM mode
- Play/Pause
- Mute
- Numeric Pad ( 0-9) : To select direct tracks from a USB drive and to select two digits and above, by consecutively pressing
- EQ : Equalizer / Mic settings (Echo, Mic Volume, Mic Priority)
- Scan: To scan all FM channels available
- Vol+ :To increase the volume
- Next: To select the next songs in BT/USB or channels in FM mode
- Vol-:To decrease the volume
Instructions for Use
Button functions
- Press the “Mode” button to change the input mode (BT/AUX/USB/FM) of the speaker.
- Short press the “Next/FM tune+” button to change the Next track or channel when in BT /USB mode or FM mode respectively.
- Short press the “Prev/FM tune-” button to change the Previous track or channel when in BT/USB mode or FM mode respectively.
- Short press the “Scan” button to scan all FM channels available.
General Instructions
BT Mode:
Power ON the speaker, press “Mode” button to switch to BT Mode. Switch ON BT
on your phone or tablet and search for nearby BT devices, Search for the BT
name “Zebronics” and tap to connect it.
USBMode:
The speaker automatically switches to USB input mode with the LED display when
a USB flash drive is inserted (this mode isn’t selectable on the speaker or
remote control unless a USB flash drive is connected). Ensure that your USB
flash drive contains Mp3 audio files (other file types not supported).
FM radio:
Switch the speaker to FM mode. In FM mode, use the Scan button in the control
panel or remote to scan for the available FM channels. Once the scanning is
done, the scanned channels will begin to play. Use Next/Previous button on the
control panel or remote can be used to change the FM channels.
AUX-IN:
The speaker can be connected to an audio device using an RCA to 3.5mm cable.
Connect the one end of the cable to the speaker and the other end to an audio
source. The songs from the audio source can be heard through the speaker.
INSTRUCTIONS FOR MIC SETTINGS:
Press & Hold the EQ button on the remote control to enter Mic settings.
In Mic settings, the following setup will appear on the LED display(press&
hold again to switch between the Mic settings)
To adjust Mic Echo, Press & hold EQ it’ll direct you to ECHO volume “E”, now
short press ‘Vol+’ or ‘Vol-‘ button on remote control.
To adjust Mic volume, Press & hold EQ twice it’ll direct you to MIC volume
“M”, now short press ‘Vol+’ or ‘Vol-‘ button on remote control and also you
can use Mic volume control Knob.
To change the Mic priority, Press & hold EQ thrice it’ll direct you to
PRIORITY setting “C”, now short press ‘Vol+’ or ‘Vol-‘ button on the remote to
set the MIC priority.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>