Hikvision DS-7104NI Network Digital Video Recorder User Manual

DS-7104NI Network Digital Video Recorder
User Manual

Legal Information
© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
Trademarks Acknowledgement
: and other Hikvision trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.
: The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE  AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,  INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.
THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS  INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT,  TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF  HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITY FOR ABNORMAL OPERATION, PRIVACY LEAKAGE, OR OTHER DAMAGES RESULTING FROM CYBER -ATTACKS, HACKER ATTACKS, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL  OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Regulatory Information
FCC Information
Please take attention that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of  this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

EU Conformity Statement

This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the  RED-Directive 2014/53/EU, the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info
For RED-Directive 2014/53/EU, the band, power transmission (EIRP), and frequency range in the EU are listed below: Wi-Fi devices:

802.11g: 15 dBm
802.11n: 14dBm| 2.402 GHz to 2.483 GHz

2G/3G/4G devices:

Band| Power Transmission (EIRP)| Tx Frequency Range| Rx Frequency Range
---|---|---|---
2G: GSM900/DCS1800
3G: WCDMA B1/B5/B8
4G: FDD-LTE
B1/3/5/7/8/20
TDD-LTE B38/40/41| GSM900: 33 dBm ± 2 dBm
DCS1800: 30 dBm ± 2 dBm
WCDMA Band 1: 24 dBm +1/-3 dBm
WCDMA Band 5: 24 dBm +1/-3 dBm
WCDMA Band 8: 24 dBm +1/-3 dBm
LTE FDD Band: 23 dBm ± 2 dBm
LTE TDD Band: 23 dBm ± 2 dBm| GSM900: 880 to 915 MHz
DCS1800: 1710 to 1785 MHz
WCDMA Band 1: 1920 to 1980
MHz
WCDMA Band 5: 824 to 849 MHz WCDMA Band 8: 880 to 915 MHz LTE Band 1: 1920 to 1980 MHz
LTE band 3: 1710 to 1785 MHz
LTE band 5: 824 to 849 MHz
LTE band 7: 2500 to 2570 MHz
LTE band 8: 880 to 915 MHz
LTE band 20: 832 to 862 MHz
LTE band 38: 2570 to 2620 MHz
LTE band 40: 2300 to 2400 MHz
LTE Band 41: 2496 to 2690 MHz| GSM900: 925 to 960 MHz
DCS1800: 1805 to 1880 MHz
WCDMA Band 1: 2110 to 2170 MHz
WCDMA Band 5: 869 to 894 MHz
WCDMA Band 8: 925 to 960 MHz
LTE Band 1: 2110 to 2170 MHz
LTE Band 3: 1805 to 1880 MHz
LTE Band 5: 869 to 894 MHz
LTE Band 7: 2620 to 2690 MHz
LTE Band 8: 925 to 960 MHz
LTE Band 20: 791 to 821 MHz
LTE Band 38: 2570 to 2620 MHz
LTE Band 40: 2300 to 2400 MHz
LTE Band 41: 2496 to 2690 MHz

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry  Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Safety Instructions

• Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

• Firmly connect the plug to the power socket. Do not connect several devices to one power adapter.
  Power off the device before connecting and disconnecting accessories and peripherals.

• Shock hazard! Disconnect all power sources before maintenance.

• The equipment must be connected to an earthed mains socket-outlet.

• The socket outlet shall be installed near the equipment and shall be easily accessible. indicates hazardous life and the external wiring connected to the terminals requires installation by an instructed person.

• Never place the equipment in an unstable location. The equipment may fall, causing serious personal injury or death.

• Input voltage should meet the SELV (Safety Extra Low Voltage) and the LPS (Limited Power Source) according to the IEC62368.

• High touch current! Connect to earth before connecting to the power supply.

• If smoke, odor, or noise rises from the device, turn off the power at once and unplug the power cable, and then please contact the service center.

• Use the device in conjunction with a UPS, and use a factory-recommended HDD if possible.

• This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

• This equipment is not suitable for use in locations where children are likely to be present.

• CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

• Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).

• Do not dispose of the battery in a fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.

• Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.

• Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.

• Dispose of used batteries according to the instructions

• Keep body parts away from fan blades and motors. Disconnect the power source during servicing.

Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:

• The device is designed for indoor use only. Install it in a well-ventilated, dust-free environment without liquids.
• Ensure the recorder is properly secured to a rack or shelf. Major shocks or jolts to the recorder as a result of dropping it may cause damage to the sensitive electronics within the recorder.
• The equipment shall not be exposed to dripping or splashing and that no objects filled with liquids shall be placed on the equipment, such as vases.
• No naked flame sources, such as lighted candles, should be placed on the equipment.
• The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. The openings shall never be blocked by placing the equipment on a bed, sofa, rug, or another similar surface.
• For certain models, ensure the correct wiring of the terminals for connection to an AC mains supply.
• For certain models, the equipment has been designed, when required, modified for connection to an IT power distribution system.
• Use only power supplies listed in the user manual or user instruction.
• The USB port of the equipment is used for connecting to a mouse, keyboard, USB flash drive, or Wi-Fi dongle only. The electric current of the connected equipment cannot exceed 0.1 A.
• Under high working temperatures (45 °C (113 °F) to 55 °C (131 °F)), the power supply of some power adaptors may decrease.

Power Supply Instructions
For Wi-Fi devices, use only the power supplies listed in the user instructions.

Note:

• The power supplies listed above is for EU countries only.
• The power supplies list is subject to change without prior notice.

HDD Installation

Startup
The proper startup is crucial to expand the life of NVR/DVR.
Step 1 Plug the power supply into an electrical outlet.
Step 2 Press the power button (certain models may have a power button on the front or rear panel).
The device begins to start.

Activate Your Device
No operation is allowed before activation. For first-time access, it requires setting an admin password for device activation. You can also activate the device via web browser,  SADP, or client software.
Step 1 Enter the same password in Create New Password and Confirm New Password.
Step 2 Optionally, set reserved email, Hik-Connect, security questions, or export GUID for password resetting in the future.
Step 3 Set the password to activate the network camera(s) connected to the device.
Step 4 Click OK to save the password and activate the device.

References

• HOME
• HOME

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>