KEMPPI Alfa e60P Lightweight Welding Mask User Manual
- June 5, 2024
- KEMPPI
Table of Contents
KEMPPI Alfa e60P Lightweight Welding Mask
INSTRUCTION
| 9873020
Alfa e60P
| 9873021
Alfa e60A
| 9873022
Beta e90P
| 9873023
Beta e90A
| 9873024
Beta e90X
---|---|---|---|---|---
PFA 60 X 110 mm| | | | |
PFA
90 X 110 mm
| | | | |
SA 35 ADF| | | | |
SA 60B ADF| | | | |
XA 47 ADF| | | | |
Note: Read this manual and the Safety instructions before use. Check that the delivery content is correct and report any damages.
BATTERY
- Battery holder
- Low battery indicator
- Shade selection: 9–13.
- Sensitivity adjustment: Low–High. Use higher sensitivity for lower welding currents.
- Delay adjustment (from dark to light): 0.1–0.9 s.
- Weld, Cut or Grind selection.
- Shade, Sensitivity or Delay selection.
- Adjust Shade, Sensitivity or Delay values, +/-.
- DIN 14-15, Weld, Cut or Grind selection.
FITTING
Adjust to fit your head (a, b) and according to the distance (c) and the viewing angle (d).
SPECIFICATION
| Operating temperature range | – 5 … + 55 °C <80% Rh |
|---|---|
| Storage temperature range | – 20 … + 50 °C <80% Rh |
| Manufacturer | Kemppi Oy, PL 13, Kempinkatu 1, |
15801 Lahti, Finland
ADF switching time| 0.1 ms
ADF light state| SA 35, SA 60B, XA 47:
Shade 4
ADF UV/IR protection| Protection at all times
Battery replaceable| SA 35, SA 60B: 2xCR2032 XA 47: 1xCR2450
Materials| Plastics: PA, PP, PC, POM Sweatband: 100 % cotton, padding foam
plastic
Ordering codes
***** = P (Passive welding filter)
** = A / X (ADF)
| Alfa| Beta
---|---|---
e60P| e60A| e90P| e90A| e90X
1| Protection plate (10)| SP9873252| SP9873253
| Shade 8| 9873161| 9873241
Shade 9| 9873171| 9873242
Shade 10| 9873181| 9873243
Shade 11| 9873191| 9873244
Shade 12| 9873202| 9873245
Shade 13| 9873211| 9873246
| SA 35| –| SP9873061| –| –| –
SA 60B| –| –| –| SP9873064| –
XA 47| –| –| –| –| SP9873063
2| Filter retaining spring| SP3149840| SP3149850
3| Inner protection plate (5)| –| SP012951| –| SP012425| SP012952
4| Safety plate (10)| SP9873254
5| Headband| SP009023
6| Sweatband (2)| SP9873018
(7)| Magnifying lens
| 1.0 (51×108)| 9873260
1.5 (51×108)| 9873261
2.0 (51×108)| 9873262
2.5 (51×108)| 9873263
(8)| Neck protection| SP015177
(9)| Head protection| W007827
| MMA| MIG, Ss| MIG, AI| MAG, CO2| TIG|
Gouging| Plasma cutting
---|---|---|---|---|---|---|---
15 A| | | | | 9| |
20 A| 9| | | | 10| |
30 A| | | | |
40 A| 10| | | 10|
11
| |
60 A| 10| 10| |
80 A|
11
| 11| |
11
100 A|
11
|
11
|
12
|
125 A| 12| 10
150 A|
175 A| | |
12
| |
13
| 11| 12
200 A
225 A| 12| 12| | 13| | 12|
250 A|
13
|
14
|
13
275 A| 13
300 A|
13
|
13
|
14
350 A|
14
| 14
400 A| |
450 A| | | |
500 A| 14| 14|
15
| 15| | 15|
550 A| 15| 15| |
600 A| |