2 MULTIMEDIA 2E-MV010 Universal Vocal Microphone User Guide
- June 13, 2024
- 2 MULTIMEDIA
Table of Contents
2 MULTIMEDIA 2E-MV010 Universal Vocal Microphone
Product Information
The 2E-MV010 is a dynamic vocal microphone designed for excellent voice projection. It features a smooth mid-frequency presence rise and a cardioid pickup pattern. The microphone has a high gain output and a low impedance design, making it ideal for vocals and speaking. It comes with a convenient On/Off switch and a high-quality 4.5 m XLR to 6.35 mm mic cable. The microphone is housed in a solid and durable case made from zinc alloy, ensuring reliability even in demanding conditions. It is perfect for KTV, stage performances, business meetings, family or friend parties, and outdoor performances.
Product Usage Instructions
- Fully plug the provided 3-pin XLR female cable into the bottom of the microphone.
- Lower the speaker volume to avoid phantom feedbacks.
- Plug the microphone into a speaker with a 6.35 mm microphone input jack.
- Turn the microphone on by pushing the button up. Pushing it down turns it off.
- Slowly increase the output volume of the speaker to find the best level.
- Hold your lips close to the microphone when using it for optimal performance.
- Consider using wind covers to keep your microphone clean and reduce wind, breath sounds, and popping noises (windscreen not included).
WHAT’S IN THE BOX
- Vocal microphone
- 4.5 m 3-pin XLR to 6.35 mm audio cable
- User guide
QUICK START
- Microphone
- 4.5 m audio cable
PREPEARING AND USING
This dynamic vocal microphone doesn’t require any additional power, so all you need is your mic and a cable.
-
Fully plug the provided 3-pin XLR female cable with the right angle into the bottom of the microphone.
NOTE: Press and hold the button to disconnect the cable from the microphone. -
Lower the speaker volume to avoid phantom feedbacks.
-
Plug the microphone into a speaker with a 6.35 mm microphone input jack.
-
Turn the microphone on (pushing a button up is on, pushing down is off).
-
Slowly increase the output volume of the speaker to best level.
-
Hold your lips close to the microphone when you use it to get the best performance.
-
Wind covers keep your microphone clean and help extend its lifetime, reducing the occurrence of wind, breath sounds and popping noises (windscreen is not included).
MAIN FEATURES
- Dynamic vocal microphone with smooth mid-frequency presence rise for excellent voice projection.
- Cardioid pickup pattern. High gain output, low impedance design. Ideal for vocals and speaking.
- Convenient On/Off switch.
- High quality 4.5 m XLR to 6.35 mm mic cable.
- The solid and durable case made from zinc alloy ensures the reliability of the performance, even in the most demanding conditions.
- Perfect for KTV, stage performance, business meeting, family or friend party, outdoor performances, etc.
SPECIFICATION
- Microphone type: vocal dynamic
- Standard impedance: 600 Ohm ± 30%
- Sensitivity: -50.6 ± 1 db (at 1 KHz)
- Frequency response: 50 – 18 000 Hz
- Direction: cardiod
- Connection: 6.35 mm jack (1/4”)
- Weight: 210 g
- Cable weight: 230 g
- Cable length: 4.5 m
Protecting your microphone
Avoid leaving your microphone in the open air or in areas where temperatures
exceed 43° C for extended periods. Extremely high humidity should also be
avoided.