VICOUSTIC VicAudiophile VMT Kit Installation Guide

June 12, 2024
VICOUSTIC

VICOUSTIC VicAudiophile VMT Kit

VICOUSTIC-VicAudiophile -VMT-Kit-fig- \(13\)

Product Information

  • Product Name: VicAudiophile VMT Kit
  • Installation Manual: Included
  • Materials Included: – VicSpacer x4 – Flat Panel VMT x4 – VicPET
  • Wool x8 – Multifuser 64 x2 – VicFix J Profile 80mm | 3.14 x4 Flexi
  • Glue Ultra – VicPattern Ultra x4 – VicFix Corner 2+2 – VicFix J
  • Profile 595mm | 23.4 x6
  • Materials Not Included: – Level Caulking Gun – Measuring Tape –
  • Drill – 6mm Phillips Screwdriver – Wall Plugs and Screws

Product Usage Instructions
VicSpacer Installation (Wall Installation)

  1. Mark the drill holes of the VicSpacers according to the diagram.
  2. If installing two or more units, pay attention to the spacing between units. The dimensions marked between VicSpacers are for use of only one metal joint between them.

Ceiling Installation

  1. Mark the drill holes of the VicSpacers according to the diagram.
  2. If installing two or more units, pay attention to the spacing between units. The dimensions marked between VicSpacers are for use of only one metal joint between them.

Flat Panel VMT Installation

  1. For wall installation and if you do not want a permanent fixation of the Flat Panel VMT, you can apply the panel directly to the Vicspacer, inserting it inside the metal frame. 2. If you want a more secure and permanent fixation, fix the Flat Panel VMT with Flexi Glue Ultra by applying a bead of glue to the surface of the plywood structure and pressing it, to ensure an even and precise adherence. 3. For ceiling installation, the Flat Panel VMT must be glued with Flexi Glue Ultra.

VicFix Corner Installation
Mark the drill holes for fixing the VicFix Corner according to the diagram.


VicPattern and Multifuser Wood MKII 64 Wall Installation:

  1. Define where you want to install the panels and start marking the drill holes for fixing the profiles to the wall. 2. Turn the panels on their back and apply the silicone drops as indicated in the diagram. 3. Apply a blocking element such as a L profile or a
    small screw to avoid the end panels from sliding off the VicFix J profile.

  2. Please note: It is recommended to apply a blocking element such as a L profile or a small screw to avoid the end panels from sliding off the VicFix J profile.

MATERIAL NEEDED

Included

VICOUSTIC-VicAudiophile -VMT-Kit-fig- \(1\)

VicSpacer Installation Wall Installation

Mark the drill holes of the VicSpacers according to the diagram.
In the case of installing two or more units, pay attention to the spacing between units. The dimensions marked between VicSpacers are for use of only one metal joint between them.

Ceiling Installation

Mark the drill holes of the VicSpacers according to the diagram.
In the case of installing two or more units, pay attention to the spacing between units. The dimensions marked between VicSpacers are for use of only one metal joint between them.

VICOUSTIC-VicAudiophile -VMT-Kit-fig- \(7\)

Flat Panel VMT Installation

VICOUSTIC-VicAudiophile -VMT-Kit-fig- \(8\)For wall installation and if you do not want a permanent fixation of the Flat Panel VMT, you can apply the panel directly to the Vicspacer, inserting it inside the metal frame. If you want a more secure and permanent fixation, fix the Flat Panel VMT with Flexi Glue Ultra by applying a bead of glue to the surface of the plywood structure and pressing it, to ensure an even and precise adherence. For ceiling installation, the Flat Panel VMT must be glued with Flexi Glue Ultra.

VICOUSTIC-VicAudiophile -VMT-Kit-fig- \(8\)

VicFix Corner Installation

VICOUSTIC-VicAudiophile -VMT-Kit-fig- \(11\)VICOUSTIC-VicAudiophile -VMT-Kit-fig- \(11\)

VicPattern and Multifuser Wood MKII 64 Wall Installation

Define where you want to install the panels and start marking the drill holes for fixing the profiles to the wall.

Turn the panels on their back and apply the silicone drops as indicated in the diagram.

VICOUSTIC-VicAudiophile -VMT-Kit-fig- \(16\)

Please note: It is recommended to apply a blocking element such as an L profile or a small screw to avoid the end panels to slide off the VicFix J profile.

Main Office, R &D & Logistics

  • Avenida do Pólo 3, Nº 159, Carvalhosa 4590-137 Paços de Ferreira, Portugal Office
  • Rua Quinta do Bom Retiro Nº 16, Armazém 9 2820-690 Charneca da Caparica, Portugal
  • T (+351) 212 964 10
  • Info and Sales
  • E sales@vicoustic.com
  • www.vicoustic.com
  • © Vicoustic, 2021 | V3 16 No parts of this document might be copied and/or published without the written consent of Vicoustic.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals