WATERPIK WP-673 Water Flosser User Guide
- June 16, 2024
- Waterpik
Table of Contents
waterflosser
QUICK START GUIDE
WP-660/662/663/670/672/
673/674/675/676
Unit Prep
A Fill eservoir with warm water and replace it firmly on the base! B, Insert
tip until it clicks into place. 
C. Turn pressure to high, point tip into sink, turn power
and water switches ON until water fiows. Turn switches OFF.
Water Floss
A. Start on low pressure and increase to your liking. Turn power ON. B. Tum water ON. Close lips enough to prevent splashing, while stil allowing water to flow from mouth into the sink. C. Aim water at the gumline at 290 degree angle. Follow the gumiine and pause briefly between teeth.
Register your product and receive over $50 in savings.
waterpik.com/registration
Visit waterpik.com/HowTo660 to watch How To
Video
TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
‘This device is only compatible with voltages of 120 VAC, 60Hz
©2017 Water Pik, Inc.
Documents / Resources
|
WATERPIK WP-673 Water
Flosser
[pdf] User Guide
WP-673 Water Flosser, WP-673, Water Flosser, Flosser
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>