ANKER 736 Charger (Nano II 100W) User Manual
- June 5, 2024
- Anker
Table of Contents
ANKER 736 Charger (Nano II 100W)
Attention
Read all the instructions before using the product.
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of)
Using Your Product
Tips
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi)
Specifications
Input
| 100~240V~ 2.1A, 50-60Hz
---|---
Output| Use One Port
USB-C1(Far From the IQ3 Icon);USB-C2(Colse to the IQ3 Icon)
USB-C1/USB-C2 : 5V 3A /9V 3A /15V 3A 20V 5A (100W Max)
PPS:3.3-16V 5A Max( 80W Max) USB-A : 4.5V 5A/5V 4.5A /5V 3A
9V 2A/12V 1.5A (22.5W Max)
Use Two Ports
USB-C1+USB-C2 :
USB-C1: 5V 3A /9V 3A /15V 3A /20V 3A (60W Max)
PPS:3.3-16V 3.75A Max ( 60W Max) USB-C2: 5V 3A /9V 3A /15V 2.67A
20V 2A (40W Max)
PPS:3.3-16V 2.5A Max( 40W Max)
USB-C1/USB-C2+USB-A : 80W+ 18W(98W
Max) / 60W+22.5W (82.5W Max)
Use Three Ports
USB-C1+USB-C2+USB-A :
45W +30W +18W ( 93W Max)
Total Output: 100W Max
Aeffivecriaegnecayctive
JP:
|
78.25%
---|---
Eloffiadcie(1n0c%y )at low
|
73.51%
Ncoon-lsouamdpptoiowner
|
0.29W
Otepmepraetriantgure|
0℃-25℃/32℉-77℉
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only) This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB003(B). Declaration
of Conformity Hereby, Anker Innovations Limited declares that the product
type A2145 is in compliance with Directive 2014/35/EU & 2014/30/EU &
2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU declaration
of conformity is available at the following internet address:
https://www.anker.com Hereby, Anker Innovations Limited declares that the
product type A2145 is in compliance with Electrical Equipment (Safety)
Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The
Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related
Products Regulations 2010. The full text of the GB declaration of conformity
is available at the following internet address: https://www.anker.com
Customer Service
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty
- 18-month limited warranty
- Lifetime technical support