ZEBRONICS ZEB-BT606RUCF Tower Speaker User Manual

: June 5, 2024
: ZEBRONICS

Table of Contents

ZEBRONICS ZEB-BT606RUCF Tower Speaker
Features
SPECIFICATION
**Remote Control
Instructions for Use
General instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZEBRONICS ZEB-BT606RUCF Tower Speaker

ZEBRONICS ZEB-BT606RUCF Tower Speaker INTRODUCTION

Thank you for purchasing ZEB-RAINBOW 400 4.1 Speaker. Please read this user manual carefully before Operation & save it for future reference

Note:

Avoid the use of this speaker at the high- temperature and high humidity environment
Avoid self-disassemble of the speaker, or it will result in the failure of warranty.

Features

Wireless BT/USB/FM/AUX/MIC Input
LED display
13.33cm Subwoofer
Remote control
Karaoke
Wired Mic
LED Lights

SPECIFICATION

Output Power (RMS) :50W
Driver size
Subwoofer:13.33cm
Full range :7.62cm x2
Impedance
Subwoofer:80
Full range :40
Frequency response :40Hz-20khz
S/N Ratio : 270dB
File format support:MP3 (USB)
Line input : 2ch RCA
Max. supported USB
memory size::32GB
FM frequency
Scan range :87.5MHz – 108MHz
BT Name : Zebronics
BT version :4.2
Product dimension :155x 260 x 620 mm
(WxDxH)
Net.Weight :5.36kg

Package content

Speaker :1U
Remote :1U
Input Cable 1U
Wired Microphone1U
QR Code Guide :1U

Control Panel Description

**Remote Control

ZEBRONICS ZEB-BT606RUCF Tower Speaker
2 **

Power:standby ON/OFF
Numeric Pad( 0-9) To select direct tracks from USB drive and to select two digits and above, by consecutively pressing
Vol+: To increase the volume
Prev: To select the previous songs in BT/UB or channels in FM mode
Vol-:To decrease the volume
RPT:To Switch between REP ALLtracks or REP 1 track
Scan:To scan all FM channels available
Mode: Mode Selection(BT/AUX/USB/FM) MEQ Equalizer Mic settings (Echo, Mic Volume, Mic Priority)
Play/Pause To Play/ Pause for current Song
Next: To select the next songs in BT/USB or channels in
FM mode
Mute To Mute/Unmute for currently playing song

Instructions for Use

Button functions

Press the “Mode” button to change the input mode (BT/AUX/USB/FM) of the speaker.
Short press the “Next” button to change the Next track or channel when in BT/USB mode or FM mode respectively.
Short press the “Prev” button to change the Previous track or channel when in BT/USB mode or FM mode respectively.
Long press the “Play/Pause” button to scan all FM channels available (Auto Scan).
Press”MUTE” Button to mute the currently playing songs.

General instructions

BT Mode

Power N the speaker, press “Mode” button to switch to BT Mode.
Switch ON BT on your phone or tablet and search for nearby BT devices, Search for the BT name “Zebronics” and tap to connect it.

USB Mode
The speaker automatically switches to USB input mode with the LED display when a USB flash drive is inserted (this mode isn’t selectable on the speaker or remote control unless a USB flash drive is connected). Ensure that your USB flash drive contains MP3 audiofiles (other file types not supported).

FM Radio
Switch the speaker to FM mode. In F mode, use the PLAY/PAUSE button in the control panel or remote to scan for the available FM channels. Once the scanning is done, the scanned channels will begin to play Use Next/Previous button on the control panel or remote can be used to change the FM channels.

AUX-IN:
The speaker can be connected to an audio device using an RCA to 3.5mm cable. Connect the one end of the cable to the speaker and the other end to an audio source. The songs from the audio source can be heard through the speaker.

Instructions for Mic Settings

Press&Hold the EQ button on the remote control to enter Mic settings.
In Mic settings, the following setup will appear on the LED display (press & hold again to switch between the Mic settings)
To adjust Mic Echo, Press & hold EQ it’lldirect you to ECHO volume “E”, now short pres Voltor Vol” button on remote control. Mic Settings:
To adjust Mic volume, Press & hold EQ twice it’ll direct you to MIC volume “M”, now short press ‘Vol+’ or ‘Vol button on remote control and also you can use Mic volume control Knob.
To change the Mic priority, Press & hold EQ thrice it’l direct you to PRIORITY setting “C” now short press ‘Vol+’ or ‘Vol-” button on remote to set the MIC priority.