vtech 557403 Touch & Feel Sensory Keys Instruction Manual

: June 5, 2024
: vtech

Table of Contents

INTRODUCTION
INCLUDED IN THIS PACKAGE
GETTING STARTED
IMPORTANT: BATTERY INFORMATION
PRODUCT FEATURES
ACTIVITIES
SONG LYRICS
CARE & MAINTENANCE
TROUBLESHOOTING
CONSUMER SERVICES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Instruction Manual
Touch & Feel Sensory Keys

VTech understands that a child’s needs and abilities change as they grow and with that in mind we develop our toys to teach and entertain at just the right level…

Toys that will stimulate their interest in different textures, sounds, and colors|
Interactive toys to develop their imagination and encourage language development|
Cool, aspirational and inspiring computers for curriculum-related learning
---|---|---
I am••• …responding to colors, sounds, and textures
…understanding cause and effect
…learning to touch, reach, grasp, sit-up, crawl and toddle| I want…
…to get ready for school by starting to learn the alphabet and counting …my learning to be as fun, easy, and exciting as can be
…to show my creativity with drawing and music so my whole brain develops| I need…
…challenging activities that can keep pace with my growing mind …intelligent technology that adapts to my level of learning …National Curriculum based content to support what I’m learning at school
| |

To learn more about this and other VTech products, visit www.vtech.co.uk

INTRODUCTION

Thank you for purchasing the VTech® Touch & Feel Sensory Keys!
This cute rattle is great for the baby to play with! Press the light-up button to trigger fun responses with a variety of music, sound effects, and phrases, and shake the rattle to hear fun sounds to add to the fun!

INCLUDED IN THIS PACKAGE

Touch & Feel Sensory Keys
Quick Start Guide

WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords, and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE: Please save this Instruction Manual as it contains important information.

GETTING STARTED

BATTERY INSTALLATION

Make sure the unit is turned OFF.
Locate the battery cover on the back of the rattle. Use a screwdriver to loosen the screw and then open the battery cover.
Remove old batteries by pulling up one end of each battery
Install 1 new AAA battery following the diagram inside the battery box. (The use of new, alkaline batteries is recommended for maximum performance.)
Replace the battery cover and tighten the screw to secure.

WARNING: Adult assembly is required for battery installation. Keep batteries out of reach of children.

IMPORTANT: BATTERY INFORMATION

Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Do not short-circuit the supply terminals.
Remove batteries during long periods of non-use.
Remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in a fire.

RECHARGEABLE BATTERIES

Remove rechargeable batteries from the toy before charging.
Rechargeable batteries are only to be charged under adult supervision.
Do not charge non-rechargeable batteries.

Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.
The chemical symbols Hg, Cd, or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd), or lead (Pb) set out in the Batteries and Accumulators Regulation.
The solid bar indicates that the product was placed on the market after 13th August 2005.
Help protect the environment by disposing of your product or batteries responsibly.
VTech® cares for the planet.
Care for the environment and give your toy a second life by disposing of it at a small electrical collection point so all its materials can be recycled.
In the UK: Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand: Check with your local council for kerbside collections.

PRODUCT FEATURES

Off/Low/High Volume Control Switch
To turn the unit ON, slide the Off/Low/ High Volume Control Switch to the low volume or high volume position. To turn the unit OFF, slide the Off/Low/High Volume Control Switch to the OFF ( ) position.
Automatic Shut-Off
To preserve battery life, the Touch & Feel Sensory Keys will automatically shut off after approximately 30 seconds without input. The unit can be turned on again by pressing the light-up button.

NOTE: If the unit repeatedly powers down while playing, please install a new set of batteries.

ACTIVITIES

Light Up Button
Press the light-up button to hear fun phrases, songs, sounds, and melodies. The light will flash with the sounds.
Motion Sensor
Shake the rattle to hear fun sounds. When a song or a melody is playing, shake the rattle again to add fun sounds to the top of the song or melody. The light will flash with the sounds.
Textured Teether
The soft textured teether key soothes your little one’s sore gums and the textured design promotes sensory development.

SONG LYRICS

Song 1
Hop in the car, we’re ready to go, Start the engine, where should we go? Buckle up, it’s time to go, Let’s cruise all around the town.
Song 2
I shake, shake my car keys, And jump into the driver’s seat.
Song 3
Jingle, jangle, 1-2-3 Grab the keys Come on, let’s go!
MELODY LIST

Bingo
The Wheels on the Bus
Yankee Doodle
Aiken Drum
Bicycle Built for Two
Diddle, Diddle Dumpling
The Entertainer
Good Morning Merry Sunshine
Hot Cross Buns
Jack and Jill
Little Boy Blue
Looby Loo
Muffin Man
My Bonnie Lies Over the Ocean
Pat-A-Cake

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat source.
Remove the batteries if the unit will not be in use for an extended period of time.
Do not drop the unit on hard surfaces and do not expose the unit to excess moisture.

TROUBLESHOOTING

If for some reason the program/activity stops working or malfunctions, please follow these steps:

Please turn the unit Off.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit On. The unit should now be ready to play with again.
If the product still does not work, install a brand new set of batteries. If the problem persists, please contact our Consumer Services Department and a service representative will be happy to help.

CONSUMER SERVICES

Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.
UK Customers: Phone: 0330 678 0149 (from UK) or +44 330 678 0149 (outside UK) Website: www.vtech.co.uk/support
Australian Customers:
Phone: 1800 862 155
Website: support.vtech.com.au
NZ Customers:
Phone: 0800 400 785
Website: support.vtech.com.au
PRODUCT WARRANTY/ CONSUMER GUARANTEES
UK Customers: Read our complete warranty policy online at vtech.co.uk/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer guarantees apply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/consumerguarantees for further information.