CALIBER TWS100A Active Noise Cancelling True Wireless Stereo Earbuds User Manual

TWS 100A
Manual

PACKAGE CONTENTS (Fig. 1)

1. Active Noise Cancelling True Wireless Stereo Earbuds TWS100A
2. 6 x Ear Tips (two are equipped on the earbuds)
3. 1 x USB Charging Cable
4. 1 x User Manual

PRODUCT DIAGRAM (Fig. 2)

Product Diagram

1. Charging Contacts
2. USB-C Charging Port
3. Charging Slot
4. Charging Indicators
5. Touch Sensor area
6. LED Indicator
7. Charging Case
8. Microphone

IMPORTANT SAFETY INSTRUCTIONS

Please read the instructions thoroughly before using this product and retain it for future reference.
Hearing Safety

• Do not wear earbuds with high volume for a long time to avoid damaging your hearing.

• Set the earbuds to a low volume before you put them on, then increase the volume gradually as per your preference.

• Do not set the volume too high to stay aware of your surroundings.

• Please refer to local laws and regulations if you want to answer phone calls via this device during driving.

• For your safety, avoid distractions from music or phone calls when you are driving or doing other activities with potential dangers.
  Warning: Please set the volume to the proper level to avoid hearing damages.
  Caution

• Do not expose this product to high temperatures.

• Do not immerse the earbuds into water or expose them to humidity for a long time.

• Do not clean the product with detergent containing alcohol, ammonia, benzene, or abrasives.

• Avoid dropping.

• Place the earbuds back into the charging case when not in use and keep them away from children and pets to avoid choking hazards.

• Unauthorized disassembly of any parts of this product is forbidden, which may cause fire hazard, warranty avoidance, and/or property loss.

• Close attention is needed when using near children.

• Keep the charging case away from water, rain or any other liquid.

• Don’t use the product in thunderstorms to avoid malfunction or electric shock.

• Always ask a professional technician or authorized personnel for repair.

This product contains a lithium battery. Never expose it to excessive heat such as direct sunlight or fire to avoid explosion.
Before first use, please remove the red protection covers on the back of the earbuds!

HOW TO WEAR

Choose the Right Tips (Fig. 3)
Ear tips with different sizes are included in the package, try all sizes and choose the ones fitting you best.

Wear the Earbuds (Fig. 4)
Please wear the earbuds as shown below.Pictures only for reference.

Bluetooth Caution
• When the device is connected wirelessly to another device, place the two devices close to each other to achieve their normal functionalities and avoid possible signal nterference.
• When using a wireless connection, make sure there are no obstacles between the two devices. Obstacles including walls and fences may shorten the effective range.

USING YOUR EARBUDS

Charging
Charging the Earbuds (Fig. 5) (Fig. 6)

1. Put the earbuds into the charging case as per the L (left) and R (right) marks
   (Fig. 5).

2. Cover the lid and charging will start automatically (Fig. 6).

Note:

• Please fully charge the earbuds when using them for the first time.
• When the battery is low, a “Battery Low Please Recharge” voice prompt will be heard (if you are wearing the earbuds). Please charge it in time or the earbuds will turn off automatically around 10 minutes later.
• Charge the earbuds at least once every 3 months when not used for a long time.

Charging the Charging Case (Fig. 7)

1. Connect the charging port with any USB charging adapter or active computer USB port (Fig. 7).
2. The four-step charging bar will light up progressively.

Note: Unplug the charging cable (timely) when fully charged.

Charging (Fig. 8)
Charging the earphones
Earphone light on during charging 100% Full charged, earphone lights go out
Charging the charging box

Power On (Fig. 9)
Uncover the lid, the earbuds will power on automatically. The LED indicators on both earbuds will light up red and then blue or white. Power Off (Fig. 10)
Put the earbuds into the charging case and cover the lid. The earbuds will turn off automatically.

• You can use one earbud or both earbuds as per your preference. Please refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device to be connected close to the earbuds.
• When the earbuds are disconnected from your device for more than 5 minutes, they will turn off automatically.

Pairing (Fig. 11)
If keep the lid open but there is no Bluetooth connection is made for 5 minutes, the earbuds will turn off automatically.

Couple Earbuds Mode

1. Uncover the lid and the earbuds will turn on automatically. They will connect with each other. Once connected, The LED indicator on Right earbud will flash blue and red or  white and red alternatively. The LED indicator on Left earbud will flash blue or white intermittently indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby devices. Find “TWS100A” in the searching results, tap on the name to connect.
3. Once connected, the LED indicators on both earbuds will be turned blue or white intermittently.
4. Take out both earbuds from the charging case. The LED indicators on both earbuds will be turned off.

Note:

• If the earbuds failed to pair with each other, please disconnect the Bluetooth connection with your device, put them back into the charging case, close the lid then open it and take out the earbuds to pair again.
•  It is not recommended to wear the two earbuds on different people. If needed, please keep the 2 earbuds within 3 meters / 9.8 feet in couple earbuds mode.

Single Earbud Mode

1. Repeat the steps corresponding to Couple Earbuds Mode. Take out one earbud from the charging case, and make sure the other one is placed in the charging case.

Note:
If you want to change to couple mode, simply take out the other earbud from the charging case, they will pair with each other automatically.
If you want to swap to another earbud, simply take out the other earbud from the charging case and put the earbud just being used back to the charging case.
Note:
If you want to pair the earbuds with another device when you have already paired them with a device, deactivate the Bluetooth function on the paired device or clear  “TWS100A” from its Bluetooth list.

OPERATION AND FUNCTIONS

Press the touch senor area for 2 seconds, (left / right earphone) to toggle between ANC on, Ambient Sound, and ANC off| ANC ON > Ambient
Sound > ANC Off
Activate Sid / Google Assistant| When the earbuds are paired with your device successfully, press 3 times the touch sensor area (left / right earphone)| none

CLEANING AND MAINTENANCE

1. Clean the earbuds and the charging case on a regular basis.

2. Use dry and soft cotton cloth to wipe the unit.
   Note: Do not insert anything into the product.

3. Keep away from sharp objects to avoid scratches.

4. Put the unit in a dry and shady place if it is to be idle for a long time.

5. Do not clean the product with detergent or chemicals.

TROUBLESHOOTING

properly
•Make sure the charging case is charged fully
3| Can’t charge the charging case| Make sure the charging cable is intact and plugged in properly
4| Can’t find
“TWS1 00A”
in the Bluetooth device list| The earbuds reconnected with the previously paired device automatically:
•Deactivate the Bluetooth function of the previously paired device or clear
“TVVS1 00A”
from its Bluetooth device list, and then search again

WARRANTY AND SERVICE

In case of problems, please contact www.calibereurope.com.

The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Kantsang New Technology Development  Limited. is under license. Other trademarks and trade names are those of their respective owners.
GB Caliber hereby declares that the device TWS100A is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU RED and 2011/65/EU RoHS.

Latest declaration form can be found at: https://calibereurope.com/nlmedia/forms/DeclarationTWS100A.pdf

WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product,  accessories  or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office,  for details of where and how they can take these items for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Old appliances and/or batteries must not be disposed of with garbage! If the device/battery can not be used anymore, every user is legally obliged to dispose of old appliances and/or batteries separated from the garbage, e.g. at a collection point of his municipality/district.

TWS 100A
Output: 3.7V 50mAh
Max ERP: <20 mW / 13dBm
Freq. range: 2.402-2.480 GHzWWW.CALIBEREUROPE.COM

References

• Caliber Europe | Smart Home, Audio, Beeld en meer!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>