fitbit G40 Smart Bracelet User Manual
- June 3, 2024
- Fitbit
Table of Contents
fitbit G40 Smart Bracelet
Downloading the App
Scan the following QR code, download and install the App.
Da Fit
Scan QR Code and Download
Charging and Active
Charging the device to active before the first time using; To charge your
device, plug the charging cable into the adapter or USB port on your computer.
Note:
Do not use a USB charger with a current exceeding 1A Charge the bracelet
Pairing
The MAC address on
the “Setting”-“About” page could help you identify your device on the scanning
list.
Use the Touch Screen
Phone Call
Connect to the bracelet through the phone s Bluetooth to make and receive
calls
(Note : Other functions must be connected to the bracelet via APP (Da
Fit) to use).
Points to note when using:
- If the bracelet has been connected by another mobile phone, please disconnect it from the original mobile phone first At the same time, the wristband end will restore the factory settings once in the settings.
- Please note that the Bluetooth name of the call connection is “Audio_G40”, (This “Audio_G40”, (This device must not be connected to a Bluetooth device named “G40”, otherwise it will appear when the APP is connected, and the search cannot be found here Problems with equipment**).
- Please do not leave the bracelet more than 5 meters away from the phone during a call, otherwise the call quality will be affected
In the mobile phone operation: settings-Bluetooth-search for “Audio G40 ”
after connecting You can dial or answer the call
Smart Watch Features
Sleep
If you keep
wearing Smart Watch in your sleep, it can provide the hours slept and quality
of sleep stats on both the screen and the APP.
NOTE:
Sleep stats reset to zero at 8:00 pm.
Heart Rate Test The Smart Watch could record your heart rate all day. You
also could tap on the page to start measuring heart rate.
Sports
Smart Watch
automatically tracks Steps ta ken on the screen.
NOTE:
Your movement stats reset to zero at midnight.
Training
Tap the training
icon on the menu to start a new training measure recording, there are Multiple
sp ort modes to be chosen. The last training recording will be shown on the
training page.
Breathe This function helps you to keep a track of your breath and
breathing activity
Spo2 Test Tap the Sp02 page to start measuring your Sp02. On the Sp02
page, It can show the SpO2 measured data of the last times.
Weather It could show the weather info of current and tomorrow on the
weather page. Weather info is synced after connecting with the APP, it will
not be updated after a long disconnected.
Messages Reminder The device can sync incoming notifications from
Twitter, Facebook, Whatsapp, Instagram etc. Recently 5 messages can be stored.
Note: You can switch of/off the incoming notification in the APP.
Remote Shutter After connecting the device, you can remote control the
camera on your phone.
Player Shutter After connecting the device, you can remote control the
music player on your phone.
Other Features Other features include stopwatch, alarm, timer,
brightness, mute on/off, theater mode , factory reset, power off and about.
Stop Watch Tap the start button on stopwatch page to start timing, and
tap the stop button to stop timing.
Silent Alarms Set up the alarm on the APP, the device wil l vibrate to
remind on time.
Remind to Drink The smart watch will remind you “Time to Drink Some
Water” at the planned drinking time.
Note:
You can set the feature in tht APP.
Remind to Move
The device will
vibrate to remind you to make a relax after 1 hour sitting.
Note:
You can switch on/off the feature in the APP.
Al Voice Click the icon to wake up the phone smart assistant, and you can
control the smart phone smart assistant through the watch voice
Getting to Know Your Device
- If you need to play songs and answer calls through this bracelet, Please go to the mobile phone-Settings-Bluetooth-Connect Audio G40 Bluetooth name device (If it cannot be used due to misoperation after a period of use, You can also repeat the following steps)
General Info &Specifications
- If the device of Audio_ G40 is not found, please confirm the When the Bluetooth switch is turned on
- a. Please slide down on the top of the bracelet (top drop-down menu) -Confirm that the phone switch is “on”
- b. If necessary, if you can’t find it yet, please click on the wristband Settings-Restore factory settings, then go back to step 1 Find the connected Bluetooth device named Audio_G40
- If the wristband is away from the phone for more than 3 minutes, To achieve low power consumption and enhance battery life, The bracelet will automatically disconnect from the phone. As shown in the figure below, it is displayed as “not connected”
- At this time, please slide down on the top of the bracelet (Top drop-down menu) Click the switch to turn off a call, Tap the call again to change the status to “On” again, You can re-enter the connection state.
- The bracelet will automatically connect with the phone again
Getting to Know Your Device
-
Using in Wet Conditions
Your device is water-resistant, which means it is rain-proof and splash-proof and can stand up to even the sweatiest workout. NOTE: Do not swim with your Smart Bracelet. We also don’t recommend showering with your wristband; though the water won’t hurt the device, wearing it 24/7 does not give your skin a chance to breathe. Whenever you get your bracelet wet, dry it thoroughly before putting it back on. -
Using Quick View
With Quick View you can check the time or the message form your phone on your Smart Bracelet without taping. Just turn your wrist towards you and the time screen will appear for a few seconds,
General Info & Specifications
-
.Environmental Conditions
Operating temperature: 14°F to 122°F (-10°C to 50°C) Non-operating temperature: -4°F to 140°F (-20°C to 60°C) -
Size
Fits a wrist between 5.5 and 7.7 inches in circumference. -
Disposal and Recycling
Please kindly be aware that it is the consumer’s responsibility to properly dispose and recycle Smart Bracelet and accompanying components. Do not dispose of Smart Bracelet with common household waste, the Smart Bracelet unit is considered electronic waste and should be disposed of at your local electronic equipment collection facility.
For more information, please contact your local electronic equipment waste
management authority or the retailer where you bought the product.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment. This device
complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.