JBL Quantum 610 Wireless Gaming Headset Installation Guide
- June 5, 2024
- JBL
Table of Contents
Quantum 610 Wireless Gaming Headset
Installation Guide
JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum
headsets – from headset calibration to adjusting 3D audio to suit your
hearing, from creating customized RGB lighting effects to determining how the
boom microphone side-tone works. JBLquantum.com/engine
Software requirements Platform: Windows 10 (64 bit only) / Windows 11
500MB of free hard drive space for installation Always use the latest version
of Windows 10 (64 it) or Windows 11 for the most optimal experience on JBL
QuantumENGINE
JBL QuantumSURROUND and DTS Headphone:X V2.0 available on Windows only. Software installation is required.
WHAT’S IN THE BOX
002 Requirements
JBL QUANTUM ENGINE SOFTWARE REQUIREMENTS
Platform: Windows 10 (64 bit only) / Windows 11
500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION
System compatibility
PC | Xbox™ | PlayStation™ | Nintendo Switch™ | Mobile | MAC | VR
| Connectivity | PC | PS4/PS5 | XBOX™ | Nintendo Switch™ | Mobile | MAC | VR |
|---|---|---|---|---|---|---|---|
| 3.5 mm Audio Cable | Stereo | Stereo | Stereo | Stereo | Stereo | Stereo | Stereo |
| 2.4G Wireless | JBL QuantumSURROUND™ & DTS HEADPHONE: XV2 | Stereo | Not | ||||
| Compatible | Stereo | Not Compatible | Stereo | Stereo |
OVERVIEW
01 Game audio-chat balance dial
02 Volume Control
03 Detachable Windshield foam
04 Notification LED for mic mute / unmute
05 RGB-lit JBL logo
06 CHARGING LED
07 3.5mm Audio Jack
08 USB-C port| 09 Voice Focus Boom Microphone
10 Flat-fold ear cup
11* Microphone Mute / unMute
12 POWER / 2.4G LED
13 POWER ON / OFF slider
14 2.4G PAIRING BUTTON
15 Volume Control
16 MIC MUTE BUTTON
---|---
POWER ON & CONNECT
SETUP
BUTTON COMMAND
First-time setup
7a Connect the headset to your PC via a 2.4G USB wireless connection.
7b Go to “Sound Settings” -> “Sound Control Panel”.
7c Under “Playback” highlight “JBL QUANTUM610 WIRELESS GAME” and select “Set
Default” -> “Default Device”.
7d Highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set Default” ->
“Default Communication Device”.
7e Under “Recording” highlight “JBL QUANTUM610 WIRELESS CHAT” and select “Set
Default” -> “Default Device”.
7f In your chat application select “JBL QUANTUM610 WIRELESSCHAT” as the
default audio device.
7G Follow the onscreen instructions to personalize your sound settings.
MICROPHONE
CHARGING
LED BEHAVIOURS
TECH SPEC
| Models: | QUANTUM610M/QUANTUM610TMM |
|---|---|
| Driver size: | 50 mm Dynamic drivers |
| Frequency response: | 20 Hz – 20 kHz |
| Microphone frequency response: Max | 100 Hz -10 kHz |
| input power | 30 mW |
| Sensitivity: | 100 dB SPL @1 kHz / 1 mW |
| Maximum SPL: | 95 dB |
| Microphone sensitivity: | -40 dBV/Pa @1 kHz |
| Impedance: | 32 ohm |
| 2.4G Wireless transmitter power: | <14 dBm |
| 2.4G Wireless modulation: | GFSK, π/4 DQPSK |
| 2.4G Wireless carrier frequency: | 2400 MHz – 2483.5 MHz |
| Battery type: | Li-ion battery (3.7 V / 1000 mAh) 5 V |
| Power supply: | 2:00 AM |
| Charging time: | 3 hrs |
| Music play time with RGB lighting | 40 hrs |
| off: Microphone pickup pattern: | Unidirectional |
| Weight: | 357 g |
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLQ610M) has also been tested against this SAR limit
According to this standard, the highest SAR value reported during product
certification for head use is 0.023 W/Kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user’s
head and the back of the headset. The use of belt clips, holsters, and similar
accessories shall not contain etal parts in its assembly. The use of
accessories that do not meet these requirements may not comply with IC RF
exposure requirements and should be avoided.
IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLQ610TMM) has also been tested against this SAR
limit According to his standard, the highest SAR value reported during
product certification for body use is 0.262 W/Kg.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
IC: 6132A-JBLQ610M
Body operation
The device was tested for typical bodily operations where the product was kept
with 5 mm distance attaching away from the body. Non-compliance with the above
restrictions may result in a violation of IC RF exposure guidelines. Use only
the supplied or approved antenna.
IC: 6132A-JBLQ610TMM
FCC ID: APIJBLQ610M
FCC ID: APIJBLQ610TMM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>