FEIYUTECH G6 Plus 3 Axis Stabilized Handheld Gimbal for Camera User Guide
- June 5, 2024
- FeiyuTech
Table of Contents
3-Axis Stabilized Handheld Gimbal for Camera
Quick Start Guide
G6 Plus Overview
- Scan QR codes to download a detailed manual for more usage of the gimbal.
User Guide
TIPS
- Please mount the camera or smartphone before powering on the gimbal.
- When the battery is low, please charge the gimbal.
- When not in use, turn off the gimbal and then remove the battery.
Install Battery
Remove the bottom cap, insert a 26650 battery and then tighten the cap.
Battery Model 26650 Li-ion Battery
Charging
Please fully charge the battery before powering on the gimbal for the first
time.
Charging with Micro USB cable.
Put the Camera / Smartphone on
Correctly place the camera on the adjustment sliding plate, and tighten it
with a thumb screw in the middle sliding chute.
If the camera doesn’t have the 1/4-20 screw hole, please put the camera on the
mount adapter, which has a 1/4-20 screw hole, and then mount it following the
above steps.
You can also put your smartphone on the smartphone adapter(Optional
accessory), then mount it following the above steps.
Balance the Gimbal ( Before power on )
Slightly adjust the positions of the vertical arm, cross arm, sliding arm, and
adjustment siding plate, and power on the gimbal after the center of gravity
of 3 axes is balanced.
Scan QR codes to download the detailed manual and refer to the chapter
“Balance the Gimbal” for the operation.
Steps
- Vertical Arm
- Cross Arm
- Sliding Arm
- Adjustment
- Sliding Plate
Power on / off
Long press the function button, and the display will show and release it when
you hear the beep tone.
Download and Install App
- Requires iOS 9.0 or later, Android 5.0 or later
Use the Feiyu ON App when you mount your camera on the gimbal
|
---|---
https://itunes.apple.com/us/app/feiyu-on/id1170606381?mt=8| http://www
.feiyu-tech.cn/download/App/Feiyu_On.apk
Use the Vicool App when you mount your smartphone on the gimbal
|
---|---
https://itunes.apple.com/us/app/vicool/id1327620365| http://www.feiyu-
tech.com/download/App/Vicool.apk
Specifications
| Product Name | G6 Plus 3-Axis Stabilized Handheld Gimbal |
|---|---|
| Max. Tilting Range | 260° |
| Max. Rolling Range | 320° |
| Max. Panning Range | 360° |
| Tilting Speed | 2°/s ~ 75°/s |
| Panning Speed | 3°/s ~ 150°/s |
| Operation Time | 9 Hours |
| Weight | 663g ( Not including the battery, camera, camera lens, etc. ) |
| Payload | 800g （ In the center of gravity balanced state ） |
| Compatible Cameras for Reference | Sony RX100 / Sony a6300 (16-50 or 28-70mm) / |
Sony a6500 (16-50 or 28-70mm) / Canon M10 (15-45mm) / Canon G3X, ect.
Sony RX0 / GoPro HERO series sports cameras Fit for a smartphone with a
smartphone adapter(Optional accessory)
DISCLAIMER
Prohibit any user for any illegal purpose. Users will be responsible for all
behaviors of purchase and use of products.
The Company assumes no liability for any risks related to or resulting from
the debug and use of this product (including the direct, indirect, or third-
party losses).
For any unknown sources of use, we will not be at any services.
The updating and changes of product firmware and program may cause changes in
function descriptions in this user manual, please read the instructions
carefully before upgrading the firmware and using the corresponding user
manual.
You can get the latest user manual from the official website: www.feiyu-
tech.com
FeiyuTech reserves the right to amend this manual and the terms and conditions
of using the gimbal at any time.
|
---|---
http://www.feiyu-tech.com/download/Manual/G6_Plus_Manual_en.pdf| http://www
.feiyu-tech.com/play/104.html
Guilin Feiyu Technology Incorporated Company
For more information, please visit our official website
E-mail: service@feiyu-tech.com
www.feiyu-tech.com
Tel: +86（0）773 2320865
Due to software and hardware improvements, your actual product might differ
from the descriptions and pictures in this user manual. You can get the latest
user manual from the official website.