FeiyuTech Vcam3S Feiyu Pocket 3 Cordless Detachable User Guide
- May 15, 2024
- FeiyuTech
Table of Contents
FeiyuTech Vcam3S Feiyu Pocket 3 Cordless Detachable
Product Information
Specifications
- Battery Capacity: 280mAh
- Charging Time: 1.5h
- Working Time: 60min (1080p@30fps)
- Weight: 82g
- Product Size: 463360.5mm
Frequently Asked Questions
- Q: What type of microSD card is compatible with Feiyu Pocket 3?
- A: Feiyu Pocket 3 requires an UHS-I Speed Grade 3 (U3) rating microSD card.
- Q: How do I charge the remote handle?
- A: Connect the Type-C cable to the charging port on the handle and ensure to charge it at least once a month.
- Q: How do I switch between different modes using the buttons?
- A: Use the Power Button for mode switching by long-pressing for power ON/OFF and single tap to switch modes. The Gimbal mode button can be used for switching modes as well.
Overview
- Power button
- Screen
- Microphone
- USB-C charging port
- Dovetail slot
- Tilt axis
- Camera lens
- Pan axis
- Shutter button / indicator
- Gimbal mode button
- Roll axis
- MicroSD ca rd slot
- Magnetic base
Start to Use
Charging
- Connect Type-C cable with charging port to charge remote handle.
- We recommend that you charge your handle at least once a month.
Insert microSD card
- An UHS – I Speed Grade 3 (U3) rating microSD card (equipped by user) is required.
- Please format the microSD card with Feiyu Pocket 3 when insert it at the first time.
Mount the expansion base
- Slide the magnetic base (the bottom part of Feiyu Pocket 3) into the expansion base as shown in the figure.
- Use the expansion base to install tripod, wristband, etc.
Usage for protective cover
- When not in use, please cover the gimbal with the protective cover.
- Hold the two sides of protective cover (which have an opening) firmly, and push it down to cover the camera (As the picture shown at right). Reveal the charging port through the opening which is larger.
- Pull the protective cover up in the same way in opposite direction to take it down.
Button Operations
Power Button
- Long press for 1s: Power ON/ OFF
- Single tap: Switch among video/ photo mode/ recently used function
Gimbal mode button
- Single tap: Follow mode/All follow mode/Pan mode (switch in tum)
- Double tap: Recenter
- Triple tap: Enter/Exit selfie mode
- Press and hold: Enter lock mode
Shutter Button
- Single tap: Take photo/ video/ return to the home page
- Long press for 3s: Tum on/ off Wi-Fi
Specifications
- Product name: Feiyu Pocket 3 Stabilized camera
- Product model: FeiyuVCAM3S
- Controllable Tilt Range: -95° to +50°
- Controllable Roll Range: ±45°
- Controllable Pan Range: -220° to +40°
- Battery Capacity: 280mAh
- Charging Time: 1.5h
- Working Time: 60min (1080p@JOfps)
- Weight: 82g
- Product Size: 463360.Smm
LIST
- Feiyu Pocket J x 1
- Expansion base x 1
- Tripod x 1
- Protective cover x 1
- USB-C cable x 1
- Wristband x 2
- Portable bag x 1
- Manual x 1
FCC STATEMENT
FCC regulatory conformance:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that t which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE
- The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
- Such modifications could void the user’s authority to operate the equipment.
RF Exposure
- The SAR limit of USA (FCC) is 4.0 W/Kg averaging over ten gram of tissue.
- Device has also bee tested against this SAR limit, the testing distance of limbs is 0mm.
More Information
User manual
- Follow the steps below to quickly experience the basic features of Feiyu Pocket 3. Read the detailed manual for more usage of the camera.
- https://www.feiyu-tech.com/feiyu-pocket-3/
Download the App
- Sean the QR code to download the app, or search for “Feiyu cam” in the App Store or Google Play.
- Requires iOS 9.0 orabove,Android 6.0 or above.