FeiyuTech VIMBLE 3 Axis Handheld Gimbal for Smartphone User Guide
- June 4, 2024
- FeiyuTech
Table of Contents
VIMBLE 3 Axis Handheld Gimbal for Smartphone
User Guide
Overview
[1] Roll axis | [10] Limitation | [19] Status indicator |
---|---|---|
[2] Cross arm | [11] Mark A button | [20] Battery indicator |
[3] Tilt axis | [12] Mark B button | [21] Album button |
[4] Vertical arm | [13] Zoom button | [22] Mode button |
[5] Pan axis | [14] Smartphone holder | [23] Shutter button |
[6] Upper trigger button (custom function in APP) | [15] Extendable bar | |
(Extendable range 0~180mm) | [24] USB C port | |
[7] Lower trigger button | [16] Joystick | [25] Power button |
[8] Handle (Built-in battery) | [17] Dial | [26] 1/4 inch thread hole |
[9] Type-C port for accessories | [18] Dial the function switching button | [27] |
Tripod
- The gimbal dose NOT include a smartphone.
Quick Experience
Step1:Unfold and fold
Step2:Smartphone Installation
It is recommended to remove the smartphone case before installation.
Keep the logo of the smartphone holder upward. Keep the smartphone holder in
the center.
If the smartphone is tilted, please move the smartphone left or right to make
it horizontal.
Step3: Power ON/OFF
Long time press the power button and release it when you hear the tone.
Charging
Please fully charge the battery before powering on the gimbal for the first
time.
Connect the USB 2.0 to the USB-C cable to charge. The indicator light is red
while charging, and turns green after charging is complete.
Landscape & Portrait Mode Switching
Double-click the function button or manually rotate the smartphone holder
(according to the picture below) to switch between landscape and portrait
mode.
Do not make the anti-clockwise rotation in landscape mode, and Do not make the
clockwise rotation in portrait mode.
Extend and Reset the Handle
- Hold the handle with one hand, and hold the bottom of the pan axis with another hand.
- Extending: Pull the extendable bar out to a suitable length (Extendable range 0~180mm).
Reset: Push the upper grip to make the extendable bar down to the handle part.
Tripod
The tripod is connected to the bottom of the main unit in a rotating manner.
According to the needs of shooting and storage, choose whether to install it.
Connection
7. 1 Bluetooth Connection
Turn on the gimbal.
Method one: Download and install Feiyu ON App, run the App, and follow the
prompts to turn on and connect with the Bluetooth.
Method two: Turn on the smartphone Bluetooth, and connect the gimbal Bluetooth
in the setting of the phone, e.g. FY_Vimble_xx.
(If the Bluetooth can’t be found, please turn off Feiyu ON App in the
background.)
7.2 App Connection
Download the Feiyu ON App
https://itunes.apple.com/us/app/feiyu-on/id1170606381?mt=8| https://cdn1 .feiyu-tech.com/dl/app/Feiyu_On.apk
Indicator
8.1 Status indicator
Status indicator | Status |
---|---|
Constant Blue light | Bluetooth connected |
Blue light flash | Bluetooth disconnected |
Blue light keeps flashing | Unpairing Bluetooth |
Green light stays on | Charging completed |
Green light flash | Initializing |
Breathing light (green) | Standby mode |
Red light stays on | Charging |
Red light flash | Low power |
8.2 Battery indicator
Battery indicator | Battery |
---|---|
High level of battery | |
Medium level of battery | |
Low power | |
Low power, will auto-power off |
Specifications
Product name: Feiyu Vimble 3 3-Axis Handheld Gimbal for Smartphone
Product model: VB3
Max. Tilt Range: -35° ~ +35°
Max. Roll Range: -50° ~ +50°
Max. Pan Range:-80° ~ +174°
Size: 114.4×175.6×64.6mm (folded state)
Net gimbal Weight: About 387g (not including tripod)
Battery: DC 7.4V / 1300mAh
Charging time: About 2.5h
Theoretical Battery Life: About 9h (for different smartphones you installed,
it’s slightly different)
Payload Capability: ≤ 260g (after balanced)
Adapter smartphones: iPhone and Android phones (the width of the phone is
between 35~88mm )
List
Vimble 3×1, Tripod×1, Storage bag×1, Manual×1
Frequency range: Bluetooth (2402-2480MHz)
Disclaimer:
Thanks for using the FeiyuTech product. The information in this document
affects your safety and your legal rights and responsibilities. Read the
entire document carefully to ensure proper configuration before use, Failure
to read and follow instructions and warnings in this document may result in
serious injury to yourself or others, damage to your products, or damage to
other objects in the vicinity.
By using this product, you hereby signify that you have read this disclaimer
and warning carefully and that you understand and agree to abide by the terms
and conditions herein.
You agree that you are solely responsible for your own conduct while using
this product, and for any consequences thereof. You agree to use this product
only for purposes that are proper and in accordance with all applicable laws,
rules, and regulations, and all terms, precautions, practices, policies, and
guidelines FeiyuTech has made and may make available. FeiyuTech accepts no
liability for damage, injury or any legal responsibility incurred directly or
indirectly from the use of the product.
FeiyuTech will not provide any service for any product obtained from abnormal
channels.
Notice:
- Make sure the motor spinning is not blocked by external force when the product is powered on.
- The product DO NOT contact water or other liquid if the product is not marked waterproof or splash-proof. Waterproof and splash-proof products DO NOT contact seawater or other corrosive liquid.
- DO NOT disassemble the product except marked detachable. It need send to FeiyuTech after-sales or an authorized service center to fix it if you accidentally disassemble it and cause abnormal work. The relevant costs are borne by the user.
- Prolonged continuous operation may cause the product surface temperature to rise, please operate carefully.
- DO NOT drop or strike the product. If the product is abnormal, contact FeiyuTech after-sales support.
Storage and Maintenance:
- Keep the product out of the reach of children and pets.
- DO NOT leave the product near heat sources such as a furnace or heater. DO NOT leave the product inside of a vehicle on hot days.
- Please store the product in a dry environment.
- DO NOT overcharge or overuse the battery, otherwise, it will cause damage to the battery core.
- Never use the product when the temperature is too high or too low.
■ Official Social Media
http://www.feiyu-tech.com| https://www.facebook.com/feiyutech| https://www.youtube.com/user/FeiyuChannel
http://www.twitter.com/feiyutech| https://www.instagram.com/FeiyuTech
This document is subject to change without notice.
Manufactured by: Guilin Feiyu Technology Incorporated Company
Website: www.feiyu-tech.com | Tel: + 86 773-2320865 | E-mail: support@feiyu-tech.com
FCC regulatory conformance
FCC ID: 2AHW7-VB3
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>