eldom HT260 Hair Dryer Instruction Manual

: June 15, 2024
: ELDOM

Table of Contents

eldom HT260 Hair Dryer
Product Information
Usage Instructions
SAFETY INSTRUCTIONS
GENERAL DESCRIPTION
TECHNICAL DETAILS
OPERATION
CLEANING AND MAINTENANCE
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eldom HT260 Hair Dryer

eldom-HT260-Hair-Dryer-product

Product Information

Specifications

Model: HT260
Power: 1800-2200W
Input Voltage: 220-240V~ 50-60Hz

General Description
The Hair Dryer HT260 is designed for drying hair. It comes with various features and accessories to provide different styling options.

On/Off switch with power settings (pos. “0” – dryer switched off, pos. “1” – weak airflow, pos. “2” – low temperature for slightly damp, not too thick or short hair, pos. “3” – medium temperature, pos. “4” – high temperature, fast drying of wet or thick hair)
Heat level switch
Cool shot
Styling nozzle (can be used interchangeably with diffuser)
Removable air intake housing
Hang up loop
Power cord
Diffuser

Usage Instructions

Before First Use
Before using the hair dryer for the first time, please thoroughly read the entire instruction manual and keep it for future reference.

eldom-HT260-Hair-Dryer-featured

This equipment can be used by children of at least 8 years old.
Always disconnect the appliance from the power supply when \finished working.
Do not handle the appliance with wet hands.
When the appliance is in operation, do not cover the air intake or nozzle.
This appliance is designed for domestic use only. Using it for industrial purposes or not following the instructions may void the warranty.
Plastic bag can be dangerous, keep it away from babies and children to avoid suffocation.
Do not use this appliance near baths, showers, swimming pools, or similar containers with water.

Operating Instructions
To start the hair dryer, use the On/Off switch (pos. “1”). Adjust the power and temperature settings according to your hair type and desired result.

The heat level switch (pos. “2”) allows you to choose between different temperature options:
- Pos. “0” – dryer switched off
- Pos. “1” – weak airflow
- Pos. “2” – low temperature for slightly damp, not too thick or short hair
- Pos. “3” – medium temperature
- Pos. “4” – high temperature, fast drying of wet or thick hair
The cool shot function can be activated using the dedicated button to set the hair and give it a final touch.
The styling nozzle (pos. “4”) and diffuser (pos. “8”) can be used interchangeably to achieve different styling effects. They can also be removed for a more general drying experience.
To remove the removable air intake housing (pos. “5”), press the elements and move it forward.

FAQ (Frequently Asked Questions)

Q: Can children use this hair dryer?
A: Yes, this equipment can be used by children of at least 8 years old. However, adult supervision is recommended.
Q: Can I use the hair dryer near water?
A: No, do not use this appliance near baths, showers, swimming pools, or similar containers with water to prevent accidents.
Q: How should I clean and maintain the hair dryer?
A: Before cleaning, always disconnect the appliance from the power supply. Clean the removable air intake housing regularly to prevent dust accumulation. Refer to the instruction manual for more detailed cleaning and maintenance instructions.

SAFETY INSTRUCTIONS

Before first use, please thoroughly read the entire manual.

It is recommended to keep this instructions manual for future reference.

This equipment can be used by children of at least 8 years of age and by people with reduced physical and mental capabilities and lack of experience and knowledge of the equipment, if supervision or instruction is provided on how to use the equipment safely so that the associated risks are understood. Children should not play with the equipment. Unsupervised children should not carry out cleaning or maintenance of the equipment. Do not allow the cord to hang where a child can grab it. Children should be supervised to ensure that they do not play with the equipment.
To provide additional protection, it is advisable to install a residual current device (RCD) with a rated residual trip current not exceeding 30mA in the electrical circuit supplying the bathroom. A specialist electrician should be consulted in this respect.
The connection cable must be connected to a socket with the parameters specified in the instructions.
Always disconnect the appliance from the mains by pulling on the plug and not on the power cord.
Do not immerse the cable or the appliance in water.
Do not use in the open air.
Do not expose the device to sunlight, hot surfaces or moisture.
When the appliance is used in the bathroom, unplug it from the mains after use, as the proximity to water is a hazard even when the appliance is switched off.
Before switching on the appliance, make sure that all its components are properly assembled.
Do not leave the appliance in use unattended.
Switch off the appliance before unplugging it from the mains and mounting and dismounting accessories.
Always disconnect the appliance from the power supply when finished working.
Do not handle the appliance with wet hands.
When the appliance is in operation, do not cover or otherwise block the air inlet and outlet openings. If the air openings are blocked, the overheating protection will automatically trip. Turn the switch to the “0” position and disconnect the unit from the mains. Once the unit has cooled down (a few minutes), it can be switched on again.
Disconnect the appliance from the mains before cleaning.
Do not exceed the permissible duration of continuous operation of the appliance.
Do not use if the power cord is damaged, if the appliance has fallen or has been damaged in any other way. Have the unit repaired by an authorised service centre; see the warranty card andwww.eldom.eu for information. Any upgrade or use of non-original spare parts or components of the appliance is prohibited and compromises the safety of use.
The appliance may be used only with the originally supplied accessories.
The company Eldom Sp. z o.o. shall not be liable for any damage caused by inappropriate use of the appliance.

WARNING:
Improper use of the appliance may cause injury.

WARNING
This appliance is designed for domestic use only; when used for industrial purposes outside the product’s specifications, or used not by the instructions, no liability is assumed and the warranty is nullified.

WARNING
A plastic bag can be dangerous, to avoid the danger of suffocation keep this bag away from babies and children. A plastic bag can be dangerous, to avoid the danger of suffocation keep this bag away from babies and children.

Caution:
Do not use this appliance near baths, showers, swimming pools, and similar containers with water.

GENERAL DESCRIPTION

On/Off switch with power settings
Heat level switch
“Cool shot”
Styling nozzle
Removable air intake housing
Hang up loop
Power cord
Diffuser

$eldom-HT260-Hair-Dryer-fig- $1$$

TECHNICAL DETAILS

power:
1800-2200W
mains supply:
220- 240V~ 50-60Hz

INTENDED USE
The dryer HT260 is designed for drying hair.

OPERATION

Before connecting the hair dryer to the power source, make sure that the switch (1) is set to position “0”.
After connecting the appliance to the mains with the parameters as specified in the manual, start the appliance with the switch (1).
- pos. “0” – dryer switched off,
- pos. “ ” – weak airflow,
- pos. “ ” – strong airflow.
Adjust air temperature using the switch (2):
- pos. “ ” – low temperature for slightly damp, not too thick or short hair,
- pos. “ ” – medium temperature,
- pos. “ ” – high temperature, fast drying of wet or thick hair.
Pressing and holding the “ ” button (3) immediately lowers the temperature of the air coming out of the dryer regardless of the temperature selected with the switch (2).
The concentrator (4) and diffuser (8) facilitate hair modeling. The tips (4) and (8) should be used interchangeably. You can also use the hair dryer without the tips (4) or (8) in place.

CLEANING AND MAINTENANCE

Before cleaning unplug the hair dryer and wait until it cools down completely.
Never immerse the hair dryer in water.
The casing and power cord can be cleaned with a soft dry or slightly damp cloth.
The air inlet and outlet should be cleaned with a soft brush.
Air intake can be cleaned after the removal of the housing (5).

In order to remove the housing (5), you should press the elements and move it forward.