YOUKAIN F3180 Series Ceiling Fan Instruction Manual

F3180 Series Ceiling Fan
Instruction Manual 

A LETTER FROM SELLER

Dear Customer,
Thank you so much for choosing our ceiling fan for your house, we are a brand focused on ceiling fan for more than 10 years since 2010 and we care for every customer and stand strongly behind our products. We offer a two-year warranty for your purchase. if you have anything about your order (package issue, accessories issue, installation problem etc.) that may need our help, just feel free to contact us and a satisfying solution is promised. To help you better install the ceiling fan more easily, below is a OR Code which you can scan it with your phone and you’ll be shown a video that tells clearly how to install the ceiling fan. If you still have any confusion after watching the video, just contact us and our technical support would be online 24’7 for you.
Thank you so much for your time and wish you all the best. Best Regards. Customer Service Team
PLEASE CONTACT US AT : Customerservice2022@hotmall.com
SCAN ME TO GET THE INSTALLATION VIDEO OF YOUR CEILING FAN

https://www.amazon.com/vdp/0489e1b4381741fc88c332eb1cdf903c?ref=dp_vse_ibvc4

Basic parameters

1. Voltage: 110V-230V (60HZ-50HZ)
2. Motor power: 35W
3. Wind speed: 6 wind speed
4. Number of rotating blades: 3 blades
5. Color: Wood Brown
6. Fan blade material: Wood
7. Motor Material: Pure copper wire winding and high-quality silicon steel stator, high efficiency, super quiet, energy saving, durable
8. Control method: Remote control
9. Diameter: 52 inch
10. Reversible: YES
11. Use area: l2ft x 12ft to 18ft x 18ft

Precautions
Before installing this ceiling fan light, please read this manual carefully and operate strictly in accordance with the procedures.

1. The input voltage of this product: is 110V/60Hz-230V50Hz.
2. If you have insufficient knowledge of electrical appliances, be sure to hire an experienced electrician to install the fan.
3. Before installing and disassembling the ceiling fan light, please turn off the power first. The installation must be installed in the order of ground wire, live wire, and a neutral wire. Before disassembly, it must be disassembled in the order of neutral wire, live wire, and ground wire to avoid electric shock.
4. The ceiling fan must be installed on a solid ceiling, which must be able to bear a weight of more than 60KG
5. While installing the ceiling fan, make sure all screws are tightly locked.
6. While the ceiling fan is working, make sure there are no objects to touch the blades in case of any danger.

Prepare Tools Before Installation:

Ceiling Fan Kit Package List

1. Ceiling Fan Kit Before installing the ceiling fan, make sure to check all the following accessories in the box one by one, if there is no shortage, you can install it.
   

**Mounting Bracket Fasten Method

**

1. Wood ceiling: Drill the mounting bracket directly into the wood ceiling with wood screws (4 pieces) or Use tools to fix the mounting bracket tightly.(The ceiling must bear more than 60KG)
   

2. Concrete ceiling: First use an 08mm hammer drill bit to drill the hole according to the length of the expansion screw, then use the equipped expansion screws (2 Pieces) to fix the bracket on the ceiling, and then tighten the nut of the expansion screw.
   Please use 8mm drill hole before installing with M6 expansion screw
   TIPS: Using different screws to secure the ceiling plate according to the different materials of the ceiling, please do not install the ceiling plate on a ceiling which is unable to bear 60KG to prevent any potential danger. After the ceiling plate is located, make sure it can withstand more than 60KG, try to pull by hands to test if the ceiling is strong enough for safety

3. The distance between the blades and the ceiling plane should not be less than 22cm(less than 22cm, the fan will have no wind)

Suspension Installation

1. Select the Downrod
   A. There are two downloads of 5 inches and 10 inches, customers can choose the proper length according to the height of the house
   B. The normal default is to install on the 5inch downrod
   C. How to replace a down rod:
   Notice: Only when the fan blade is higher than 2.3 meters from the ground after installation, then you can change a longer downrod
   a. Loosen the two fixing screws (as shown in Figure 2).
   b. Push the downrod upwards (as shown in Figure 3) out of the horizontal tip (as shown in Figure 4).
   c. Then pull out the 5-inch downrod to replace another 10-inch downrod (as shown in Figure 5).
   d. After replacement, follow the above installation steps 4-3-2 to install until it is restored to the state shown in Figure 1.
   e. Finally, you must pay attention that the two fixing screws must be firmly locked.

2. Suspension Installation
   A.Remove the positioning screws from the fan body as follows and place them side by side to proceed to the next step (Fig 7)
   B.Get off the pin off the downrod by removing the R clip, and get the lead wire through the downrod and canopy, then seat the downrod into the fan body & rotate the downrod until the holes on the downrod will match with the holes on the fan body, finally, you should get the pin through the holes and fix the pin by the R clip in another side (Fig 8)
   C. Tighten the two set screws, which were removed in stepA (Fig 9)
   

3. Hang the fan on the hanger, and then slowly rotate the fan downrod to make the lugs on the hanger fit with the groove of the hanging ball on the downrod. (Figure 10)
   

Attaching Fan Blades

1. Take out the blade screws in the hardware package (as shown in Figure 10)
2. Align the blade screw hole with the motor hole, and tighten the screws in turn (Figure 11 )
   Note: The solid wood fan blades have a certain squeezing space. The blades must be installed with gaskets, and pay attention to locking with conventional force. Do not continue to apply force after the blades are locked to continue screwing in the screws, otherwise, It will cause irreversible failures to the motor coil!

Wiring
The all-pole disconnect circle breaker with a contact distance of 3mm must be connected to the fixed wiring.

b. Wiring method of remote control receiver: (Figure 6)

1. Connect the motor U wire (gray wire) from the motor to the wiring hole of the remote control receiver (motor U wire, gray mark)
2. Connect the motor V wire (red wire) from the motor to the wiring hole of the remote control receiver (motor V wire, red mark)
3. Connect the motor W wire (yellow wire) from the motor to the wiring hole of the remote control receiver (motor W wire, yellow mark)
4. Connect the home live wire from the ceiling to the L wiring hole of the remote control receiver (input the fire wiring logo)
5. Connect the household neutral wire from the ceiling to the N wiring hole of the remote control receiver (input the neutral line logo)

Canopy Installation

After wiring, please loosen the two screws pre-installed on the mounting bracket to match the two holes on the canopy

Balance adjustment method of a ceiling fan.

If there is any shaking after ceiling fan installation, please confirm whether the screws that fix the drop ball, mounting bracket, hanger, leaf shelf, and blade are locked. If one of the above parts is not locked, please re-lock it. If it is locked, please adjust it as follows.

1. Change the position of the fan blades:
   a. As shown in figure 1 on the right, please remove the leaf and 2 and lock each other to observe the effect.
   b. There is no improvement after the swap blade position. Please remove the fan blades 2 and 3 and re-lock each other to observe the effect.
   

2. Adjust with balance pack
   A. Take out the balance bag from the packing box, use a balance clamp to select one of the fan blades, and clamp the balance clamp on the edge of the tail end of the fan blade (as shown in Figure 2 on the right)
   B. Turn on the fan switch to see whether the shaking of the ceiling fan has been reduced. If it does not improve, try another fan blade. Experiment with all the fan blades, in turn, to find the blade with the weakest clamping balance.
   C. Clamp the balance clamp on the fan blade with the weakest shaking, move it in or out on the edge of the fan blade and turn on the ceiling fan to find the best position of the balance clamp to control shaking balance (as shown in the right figure 2)
   D. Take the balance sticker, tear off the double-sided tape of the balance sticker, and stick the balance sticker on the center of the blade at the position of the balancing clip (as shown in the right picture 2)

Precautions

Warning
In order to prevent fire and electric shock, it is forbidden to install and use the electric switch which is not equipped with this ceiling fan.
Maintenance and repair of ceiling fans

1. It is recommended to check the connecting parts of the fan ar least once a year, such as a hanger, the hanging pipe fastening screw, and the fan blade, to ensure that their connection is still safe and reliable.
2. Clean the ceiling fan regularly to keep the surface clean and clean. When removing surface dust, please use a soft brush or cloth. When removing oil or laminate, wipe it off with a slightly wet cloth. Do not rinse with water directly
3. Motor bearing is already provided with grease, do not add lubricating oil to the motor of a ceiling fan. To avoid scratching the surface.

Ceiling Fan Troubleshooting Solutions & Common Problems

Can’t start| 1. Check whether the fuse of the external power line of the ceiling fan is blown, whether the automatic protection switch is tripped and the circuit is broken.
---|---
2. Check whether the voltage is seriously lower than the rated voltage of the ceiling fan.
3. Check whether the internal wiring of the ceiling fan is loose or has poor contact.
Noise| 1. Ensure the ceiling fan is not severely impacted before installation
2. Make sure that the hanging pipe connecting bolt is installed correctly and the hanging pipe solenoid is locked.
3. The new ceiling fan allows a 24-hour ‘trial period”, after the trial period, most of the ceiling fan noise will disappear.
4. It is not recommended to install on wooden ceilings, steel structures, or prefabricated panels, as this will amplify the sound.
The lamp is defective| 1. Check whether the connection wire of the lamp is loose.
2. Check whether the light switch is damaged, the wire end is loose or the contact is poor.
3. Check whether the light source is burned out
Fan swing| 1. Check whether the mounting bracket is locked
2. Check if the screw of the lock blade is locked
3. Check whether the screw of the leaf frame retracted to the motor is locked
4. Can it be installed on the inclined ceiling? Yes, pay attention to the inclination angle not exceeding 30 degrees (pay attention to whether the drop ball will press the fan control)
Boom length| The package contains two derricks, 5 inches, and 10 inches
Safe height| The safety height is 2.3-2.4m (not less than 2.3M) The standard boom is suitable for a height of 2.7-3m
Ceiling fan installation distance| More than 22cm will not cause the wind to decrease.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>