YOUKAIN HDLP-10015AS 5 Light Antique Silver Hanging Chandelier Instruction Manual
- October 30, 2023
- YOUKAIN
Table of Contents
YOUKAIN HDLP-10015AS 5 Light Antique Silver Hanging Chandelier
Product Information
This product is a light fixture that can accommodate up to 5 medium base bulbs
with a maximum wattage of 60W each. It comes with all the necessary hardware
for installation, including a mounting plate, support screws, outlet box
screws, hex nuts, finials,
downrods, glass shades, wire connectors, canopy, and flat washers. The fixture
has a green ground screw on the mounting plate for safety purposes, and a
warning label to disconnect power before installation. The product comes with
a 1-year warranty.
Product Usage Instructions
- Read all instructions careflly before starting the installation process.
- Choose a soft, non-abrasive surface such as carpet or cardboard to place the product on to avoid damage.
- Gather all the necessary tools required for installation, including a Phillips screwdriver, wire stripper, pliers, and safety goggles.
- Disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
- If new wiring is required, consult a qualified electrician or local authorities for code requirements.
- Determine the length of stem or chain required for your installation.
- Attach the mounting plate to the junction box using the provided screws and hex nuts.
- Make all necessary electrical connections following the wiring diagram provided in the manual. Use wire connectors and wire nutsto connect the wires.
- Hang the fixture from the ceiling using the provided downrods and connecter rings.
- Install the glass shades and finials.
- Turn on the power and test the fixture.
- To protect children, place a safety cover over any unused outlets.
For any non-electrical questions or concerns, please contact customer service via the distributor where you purchased the product. If you have any electrical questions, consult a qualified electrician.
Safety lnformation
READ AND SAVE THESE INSTRUCTIONS
- For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electrical shock, fire, or other injuries that could be hazardous or even fatal.
- Before touching any wire, use a voltage tester to make sure it not live.
- When replacing fuses, turn off the main power first. Make sure your hands and feet are dry, and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch the plug fuse only by its insulated rim. Remove cartridge fuses with a fuse puller.
- Use tools with insulated handles and ladders made of wood or fiberglass.
- To protect children, place a safely cover over any unused outlets.
- DANGER: Before staring installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
- CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. lf you have any non-electrical questions about this fixture please contact our customer service via the distributor where you purchased this product from. We will be more than happy to assist.
Pre-lnstallation
PLANNING INSTALLATION
Read all instructions before installing.
To avoid damaging this product, place it on a soft, non-abrasive surface, such
as carpet or cardboard.
TOOLS REQUIRED
(NOT INCLUDED)
HARDWARE INCLUDED
Assembly lnstructions
Assembly of this fixture will be accomplished by first determining the length of stem or chain required, attaching the mounting plate to the junction box, making all necessary electrical connections, hanging the fixture from the ceiling and then installing the fixture.
Safety Warning
Read wiring and grounding instruction and any additional directions. Turn
power supply off during installation. If new wiring is required, consult a
qualified electrician or local authorities for code requirements.
Warranty
The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of one (1) year from date of purchase. The warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer`s only obligation, and your exclusive remedy, is the repair or replacement of the product at the ONE (1) YEAR WARRANTY
WHAT IS COVERED
manufacturer’s discretion, provided that the product has not been damaged
through misuse, abuse, accident, modifications, alteration, way not in
accordance with the instructions supplied with the product. This warranty
shall not apply to a failure of the product as a result of an accident,
misuse, abuse, negligence, alteration, faulty installation, or any other
failure not relating to faulty material or workmanship. This warranty shall
not apply to the finish on any portion of the product, such as surface and/or
weathering, as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty,
whether expressed or implied, of fitness for a particular purpose, other than
the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor/expense costs involved in the
replacement or repair of said product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>