COSMO COS-63175 30 Inch Ducted Wall Mount Range Hood User Manual

COSMO COS-63175 30 Inch Ducted Wall Mount Range Hood

WATCH QUICK START GUIDE
cosmoappliances.com/wm-start CODE
Call Support: 1-888-784-3108IMPORTANT SAFETY INSTRUCTIONS
Carefully read the following Important information redarding installation safety and maintenance. Keep these instruction for future reference.

THANK YOU FOR YOUR PURCHASE
Thank you for your purchase. We know that you have many brands and products to choose from and we are honored to know that you have decided to take one of our products into your home and hope that you enjoy it.
COSMO appliances are designed according to the strictest safety and performance standard for the North American market. We follow the most advanced manufacturing philosophy. Each appliance leaves the factory after thorough quality inspection and testing. Our distributors and our service partners are ready to answer any questions you may have regarding how to install, use and care for your products. We hope that this manual will help you learn to use the product in the safest and most effective manner.

If you have any questions or concerns, please contact the dealer from whom you purchased it, or contact our Customer Support at:
1-888-784-3108.

STAINLESS STEEL BAFFLE FILTERS

About Your New Filters
Stainless Steel Baffle Filters do not need linings or mesh inside of the filters and are completely constructed out of stainless steel. The stainless steel construction allows them to be used again after being cleaned or going through the dishwasher.

How do Baffle Filters Work?
They function by forcing the grease-filled air to quickly and continuously change direction as it passes through the filter. The grease is unable to change direction as fast as the air carrying them, they end up getting caught on the metal blades and then trapped into the filter tray.These filters are both efficient and require less maintenance.

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.
Save these instructions for future references
Approved for residential appliances
For residential use only

CAUTION
FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS OR VAPORS.
CAUTION
To reduce risk of fire and to properly exhaust air, do not vent exhaust air into spaces within walls, ceilings, attics, crawl spaces, or garages.

WARNING
TO REDUCE THE RISK OF FIRE, USE ONLY METAL
DUCTWORK. Install this hood in accordance with all requirements specified.

WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
A. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer
B. Before servicing or cleaning the unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
C. Installation Work and Electrical Wiring Must Be Done
By Qualified Person(s) In Accordance With all Applicable Codes&
Standards, Including Fire-rated Construction.
D. Sufficient air is needed for proper com exhausting of gases through the flue (Chimney) of fuel burning equipment to prevent back-drafting. Follolow the heating equipment manufacturers guideline and safety standards such as those published by the National Fire Protection Association (NFPA), the American Society for Heating,
Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities. stion and
E. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
F. Ducted systems must always be vented to the outdoors.

WARNING
To Reduce The Risk of Fire Or Electric Shock, Do Not Use This Hood With Any External Solid State Speed Control Device.

WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS, IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:
A. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or other metal trays, then turn off the gas burner or the electric element. BE CAREFUL TO
PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT

B. NEVER PICK UP A FLAMING PAN – you may be burned. DO NOT USE WATER including wet dishcloths or towels -a violent steam explosion will result.
Always leave safety grills and filters in place. Without these components, operating blowers could catch onto hair, fingers and loose clothing. The manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation, maintenance and suitable use of the product. The manufacturer further declines all responsibility for injury due to negligence and the warranty of the unit automatically expires due to improper maintenance.

WARNING
Unplug or disconnect the appliance from the power supply before servicing.

DIMENSION DIAGRAM – 631 SERIES

63175/63190/63175S/63190S

PARTS DIAGRAM – 631 SERIES

63175 / 63190 / 63175S / 63190S

DIMENSION DIAGRAM – 668A/WRC SERIES

668A750 / 668A900 / 668AS750 / 668AS900
668WRC75 / 668WRC90 / 668WRCS75 / 668WRCS90

PARTS DIAGRAM – 668A/WRC SERIES

668A750 / 668A900 / 668AS750 /668AS900
668WRC75 / 668WRC90 / 668WRCS75 / 668WRCS90

DIMENSION DIAGRAM – 6324EWH

INSTALLATION REQUIREMENTS

1. Do not install the range hood near open doors and windows to avoid reduced performance. (Fig.1)
2. Install the range hood directly above the cooktop. The optimal distance between the cooktop and lower edge of the range hood is 24″ to 36″. (Fig.2) Install at the height appropriate to your ceiling. Make sure the chimney reaches the ceiling. If your ceiling leaves the hood a few inches higher or lower than 24″ to 36″ you can still install it without a major loss of performance.
3. For optimal performance, do not over-extend the exhaust tube and avoid unnecessary bending. (Fig.3)
4. After hanging the unit on the wall, ensure the range hood is straight and leveled. (Fig.4)
5. The air outlet must be connected to chimney flumes or combustion gas ducts. Under no circumstances should the air outlet be connected to ventilation ducts for rooms in which fuel-burning appliances are installed.

PARTS LIST

• A. 11 pcs 2/8″ x 1 3/8″ Plastic Anchors
• B. 11 pcs 1/8″ x 1 7/8″ Screws (48mm)
• C. 4 pcs 1/8″ x 3/8″ Screws (35mm)
• D. Core Unit Bracket (Main Body)
• E. Outer Chimney Cover Bracket
• F. 6 in. Round Aluminum Duct
• G. oil Cup
• H Inner Chimney Cover Bracket
  Note: Hardware, number of screws, anchors and accessories will vary based on product model.

RANGE HOOD INSTALLATION

Step 1:
Place the range hood on the wall and mark the position where you want to install.
A height of 24″ to 36″ from the cooktop i  recommended for optimal performance. Install at the height appropriate for your ceiling. You may install higher if needed. Make sure the chimney can still reach the ceiling. If your ceiling leaves the hood a few inches higher or lower than 24″ to 36″ you can still install it without a major loss of performance.
There are 3 included brackets.
Start your measurements from the top down to make sure the chimney reaches the ceiling with no gap if desired.
If you intend to run your ducting through the back wall behind the hood, it is not necessary for the chimney to touch the ceiling.

Step 2:
A. Find the Core Unit Bracket (D) that will hold the back of the range hood. Mark the locations on the wall with a pencil or marker.
B. Drill a 5/16″ (8mm) hole at each marked location.
C. Insert wall anchors into each hole, gently tapping in place.
D. Take the Core Unit Bracket ( Part D) that will hold the range hood and firmly tighten with 3 wood screws (Part B) into the anchors.
Secure range hood by hanging on bracket.

Step 3:
Locate the 6″ round aluminum duct (F) and attach it to the top air Outlet on the main body of the range hood with HVAC foil tape (not included). Make sure it is connected tightly.

Step 4:
Place the bottom of Outer Chimney into Core Body’s seating located near vent hole.
Then Insert the Inner Chimney cover into the Outer Chimney Cover.
Note that the Inner Chimney cover must slide into the Outer Chimney cover’s orientation slot. (see step 7 for mounting bracket install)

Step 5:
A. Extend the inner chimney cover to the height at which it will touch the ceiling. Using a pencil, place a small mark on each side of the chimney cover which is level with the screw holes of the chimney. Now slide the inner chimney cover down.
B. Using a pencil, place a small mark on the wall on each side of the chimney
C. Align the middle of the Inner chimney bracket (H) with the drawn line and make a mark where each screw hole in your wall will need to be drilled for mounting of the bracket.
D. Drill 1/4″ holes at each marked location
The drilled hole should be slightly smaller than the diameter of the anchor.
E. Insert anchors into each drilled hole.
F. Align Inner chimney bracket (H) with the drilled holes and firmly screw it into place.

Step 6:
Extend the 6″ Duct to the vent pipe of your building or outside. For optimal performance try to minimize bending of the duct.

Step 7:
Mount outer chimney bracket (E) to the wall appropriate to the height of the outer chimney. Use the hooks on bracket to mount bottom chimney.
Extend Inner Chimney until it touches the ceiling. Align sides with Inner Chimney Mounting Bracket (H)(already mounted to wall) and firmly screw sides of Inner Chimney to bracket with 3/8″ screws (C in parts list).
If you intend to run your ducting through the back wall behind the hood, it is not necessary for the chimney to touch the ceiling.

Step 8:
Insert and install filters according to the diagram on Next Page.
Start at 90°Angle and line up the hooks on filter with the rectangular slots on the range hood. Lift the filter up and push the button on filters t0 allow it to lock into place.

BAFFLE FILTER INSTALLATION

Line up filter Hooks to holes in unit.

RECIRCULATING CHARCOAL FILTERS

Skip this page if you are installing a Ducted Range Hood.
Charcoal Filters are only included with Ductless Models
Step 1: Remove the ARC-FLOW Baffle Filters.
Step 2: Locate the motor lpictured below) and align one of the filters with the right side of the motor.

Step 3: Twist and lock the filter into place.
Step 4: Repeat Steps 2-3 on the left side of the motor.

Step 5: Reinstall the ARC-FLOW Baffle Filters back into place.

NOTE: Chimney vent holes must be open and visible for the filtered air to recirculate.

It is recommended that the charcoal filter be replaced every 4-6 months. Charcoal filter replacements are available for purchase at: www.cosmoappliances.com. Charcoal Filter Kit Part# CFK1-TM or CFK6 (COS-6324EWH Model Only)

OIL CUP INSTALLATION

PUSH BUTTON CONTROLS

COMPATIBLE WITH MODELS:
COS-63175                COS-668A750              COS-668WRC75
COS-63190                COS-668A900              COS-668WRC90

A. Light. Press to turn light on / off.
B. Highest Fan Setting
C. Medium Fan Setting
D. Lowest Fan Setting
E. Power Button. Press to turn unit on / off.
When shutting off, press once to delay shut-off for 1 minute, or press twice to shut off immediately.

COMPATIBLE WITH MODEL COS-6324EWH

How to use the Push Button:

• Press to select on/off.
• Press to select the low speed
• Press to select the medium speed.
• Press to select the high speed.
• Press to turn on /off the light.

SOFT TOUCH INSTALLATION

COMPATIBLE WITH MODELS:
COs-668WRCS75, COS-668WRCS90
COS-668AS750, COS-668AS900
COS-63175S, COS-63190S

A. Light. Press to turn light on/ off.
B. Timer Button
C. Minus Button (Fan Speed)
D. Plus Button (Fan Speed)
E. Fan Power Button (Starts Max Fan Speed)
F. Power Button. Press to turn unit On/off
Note: When Fan is ON + or will increase or decrease fan speed.

Setting the Clock

1. Hold Timer Button for 3 Seconds
   Use Light Button (A) to set Minutes
   Use Fan Speed Button (E) to set Hours

2. Once time is set, Press Timer button to complete.

3. After setting the time, leave the unit alone for 5 seconds for the changes to save.

Setting the Timer

1. Turn fan on and set to desired fan speed.

2. Press the Timer Button (B).
   Continue tapping the Timer Button (B) to set the time duration before the fan should automatically turn of.

3. After setting the timer, leave the unit alone for 5 seconds for the changes to save and the timer will start counting down.

MAINTENANCE

CAUTION: NEVER PUT YOUR HAND INSIDE OF THE UNIT WHILE ITS OPERATING. FOR THE BEST PERFORMANCE CLEAN YOUR RANGE HOOD REGULARLY.

CLEANING

1. Use only mild soap or cleaning solutions to clean the range hoods outer surface. Dry surfaces using a soft cloth.
2. Stainless Steel cleaner may be used on the external surface.
3. Cleaning the Baffle Filters: For daily cleaning, use hot, soapy water and a soft cloth. Wipe dry and finish with a damp microfiber cloth. Baffle filters can also be cleaned in the dishwasher.
4. Clean the Range Hood assembly once every 6 months.
5. DO NOT clean the motor or electrical components with water or any other liquid.

REPLACING LIGHT BULBS
CAUTION : LAMP UNIT MAY BE HOT! WAIT UNTIL THE UNIT IS COOL. BEFORE ATTEMPTING TO REPLACE THE LED LAMPS MAKE SURE THE UNIT IS POWERED OFF AND UNPLUGGED.

Note: Individual LED bulbs cannot be replaced only LED lamps.

1. Remove the baffle filters
2. Find the wire connection of the lamp and unplug.
3. Remove old LED lamp.
4. Plugin new LED lamp.
5. Reinstall the baffle filters.

TROUBLESHOOTING

CAUTION: ALWAYS DISCONNECT UNIT FROM POWER BEFORE SERVICING

WARRANTY AND SERVICE
For full warranty details on this product please visit:
http://www.cosmoappliances.com/warranty
TO RECEIVE WARRANTY SERVICE, YOUR
PRODUCT MUST BE REGISTERED. TO REGISTER, VISIT:
WWW.COSMOAPPLIANCES.COM/WARRANTY

IMPORTANT
Do Not Return This Product To The Store If you have a problem with this product, please contact Cosmo Customer Support at
+1(888)784-3108
DATED PROOF OF PURCHASE, MODEL #, AND SERIAL #
REQUIRED FOR WARRANTY SERVICE
UNE PREUVE D’ACHAT DATEE EST REQUISE POUR BENEFICIER DE LA GARANTIE.
AYUDA AL CLIENTE COSMO al
+1(888)784-3108
(Válido solo en E.U.A).

Correct Disposal of this product:
This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Cosmo is constantly making efforts to improve the quality and per formance of our products, so we may make changes to our appli ances without updating this manual.

Electronic version of this manual is available at:
www.cosmoappliances.com

References

• Cosmo Wall Mount Range Hood Troubleshooting Guide | Cosmo Appliances
• Cosmo Wall Mount Range Hood Quick Start Guide | Cosmo Appliances
• Warranty | Cosmo Appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>