XPG 0614 Alpha Wireless Gaming Mouse User Guide

June 3, 2024
XPG

QUICK START GUIDE
XPG ALPHA WIRELESS GAMING MOUSE
User Guide

PACKAGE CONTENTS

XPG 0614 Alpha Wireless Gaming Mouse - FIGURE 1| XPG 0614 Alpha Wireless Gaming Mouse - FIGURE 2
---|---

PRODUCT OVERVIEW

XPG 0614 Alpha Wireless Gaming Mouse - FIGURE 3

BLUETOOTH PAIRING INSTRUCTIONS

Pairing Mode: Press the DPI button and switch to BT Mode for 3 seconds.
The status indicator on the DPI button will turn Blue color for 2 seconds.
DPI Lighting Indicators
400| 800| 1600| 3200| 6400| 16000
Purple| Red
(default)| white| Orange| Yellow| Green

  • All 6 buttons are programmable.
  • DPI 100 is available when synchronized with XPG PRIME software.
  • To update XPG ALPHA’s firmware, please connect the mouse to a computer with the provided Type-C cable.

Scan the QR code for more information.

http://www.adata.com/redirect/807

PRODUCT SPECIFICATIONS

PHYSICAL SPECIFICATIONS TRACKING
Length 128 mm (5.04 inch)
Width 78 mm (3.07 inch)
Height 40 mm (1.57 Inch)
Weight 98±5 g
Cable Length 1.8 m (5.9 feet)
Interface USB Type-C
RESPONSIVENESS VOLTAGE a CURRENT
--- ---
USB Polling Rate 1000 Hz (LMS)
Wireless Polling Rate 1000 Hz (LMS)
BATTERY LIFE MATERIAL
--- ---
Up to 60 hours (*depending on the usage) Mouse Feet

BATTERY CHARGING INSTRUCTIONS

XPG 0614 Alpha Wireless Gaming Mouse - FIGURE 4

| Pairing| Low Battery| Charging
---|---|---|---
Status Indicators| Blue
(Breathing Effect)| Red
(Breathing Effect)| Color Lighting Effect by Setting

CLEANING INSTRUCTIONS

Please use a clean damp cloth to clean the product properly.
Do not apply any soap or solvent agent on the surface to preserve its integrity.

SAFETY INSTRUCTIONS
For the proper use of the product, and to ensure your safety, please follow the following instructions:

  1. Keep the device away from liquids, excess humidity, or moisture to avoid any shock hazards. Should the device come into contact with liquids, please make sure to unplug the device immediately, store it in a dry place, and contact support for assistance.
  2. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.
  3. Should you have any other trouble operating the device properly and normal troubleshooting does not work, please unplug the device and contact our service for support.
  4. Do not attempt to service or fix the device by yourself at any time.

DURATION OF WARRANTY
ADATA Technology Co., Ltd. provides a two-year warranty period for this product unless regional laws and regulations state otherwise.
LIMITATION OF WARRANTY
This limited warranty covers only repairs or replacements of products manufactured by ADATA Technology Co. Ltd. and its authorized partners.
Please note that ADATA is responsible for providing free repairs except for the following reasons:

  1. The warranty label is altered, damaged, or missing.
  2. The product serial number does not conform to our original system.
  3. Products purchased from an unauthorized agent.
  4. Damage caused by natural calamity
  5. Any abuse outside the intended product operation.

ONLINE CUSTOMER SERVICE
For frequently asked questions, additional information, and service instruction please visit the product page at www.xpg.com

Industry Canada statement:
This device complies with ISED’s license-exempt RSS. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and
(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.
(v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
FOR PORTABLE DEVICE USAGE (<20m from body/SAR needed)
Radiation Exposure Statement:
The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such a function is available.
FOR MOBILE DEVICE USAGE ( >20cm/low power)
Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Hereby ADATA XPG declares that this device is in compliance with Directive 2014/53/EU

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Federal Communication Commission Interference Statement

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such a function is available.

XTREME PERFORMANCE GEAR

Equipment name| ALPHAWL-BKCWW
Type designation (Type)
---|---
Unit| Restricted substances and their chemical symbols
Lead
(Pb)| Mercury
(Hg)| Cadmium
(Cd)| Hexavalent chromium
(Cr+6)| Polybrominated biphenyls
(PBB)| Polybrominated diphenyl ethers
(PBDE)
| ◯| ◯| ◯| ◯| ◯| ◯
| ◯| ◯| ◯| ◯| ◯| ◯
| ◯| ◯| ◯| ◯| ◯| ◯
| ◯| ◯| ◯| ◯| ◯| ◯
| ◯| ◯| ◯| ◯| ◯| ◯
Note 1: “Exceeding 0.1 wt 0/0” and “exceeding 0.01 wt %” indicates that the percentage content of the restricted substance exceeds the reference percentage value of the present condition
Note 2: ” ” indicates that the percentage content of the restricted substance does not exceed
the percentage of the reference value of the presence
Note 3:The “—” indicates that the restricted substance corresponds to the exemption.

PRODUCT WEBSITE
http://www.adata.com/redirect/805

|

XPG 0614 Alpha Wireless Gaming Mouse - QR Cose 2 QSG
http://www.adata.com/redirect/806

---|---

GAME TO THE XTREME
ADATA Technology Co., Ltd.
2F, No. 258, Liancheng Rd., Zhonghe Dist., New Taipei City 235, Taiwan
Product Name: XPG ALPHA WIRELESS
ALPHAWL-BKCWW
Tel: +886-2-8228-0886
Fax: +886-2-8228-0887
MADE IN CHINA

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals