XPG LEVANTE X X360 ARGB CPU Liquid Cooler Instruction Manual

XPG LEVANTE X X360 ARGB CPU Liquid Cooler Instruction Manual

SPECIFICATIONS and PRODUCT FEATURES

• CPU LIQUID COOLER
  

• 120mm ARGB Fan
  

• PWR FAN EXTENSION CABLE
  

• ARGB LED CABLE
  

• FAN SCREWS
  

• RADIATOR SCREWS
  

• WASHERS
  

• THUMBSCREW CAPS
  
  

PACKAGE CONTENTS: MOUNTING Intel CPUs

• BACKPLATE for Intel CPUs (LGA 1700, 1200, 115X)
  

• Intel MOUNTING BRACKET (LGA 1700, 1200, 115X)
  

• Intel LGA 1700 STANDOFF SCREWS
  

• Intel LGA 1200 / 115x STANDOFF SCREWS
  

PACKAGE CONTENTS: MOUNTING AMD CPUs

• AMD MOUNTING BRACKET (AM5/AM4)
  
  

• AMD AM5/AM4 MOUNTING SCREWS
  

MOTHERBOARD SETUP

Intel PLATFORM

Intel Platform (LGA 1700, 1200, 115x)

• For LGA 115X / 1200 Socket Installation, slide the backplate pins inwards.

1. Install the Intel Backplate in the rear of the motherboard,

2. Screw the backplate with the provided standofts

MOTHERBOARD SETUP

AMD PLATFORM

AMD Platform ( AMS/AM4 Socket )

1.  Remove the pre-installed AMD heatsink mount.
   

2. Secure with the provided AMS/AM4 Standoff screws.
   

FAN INSTALLATION on the RADIATOR

1.  Use the provided Fan Screws to install the Fans on the Radiator.
   

2. Connect each 4-Pin Fan Power Connector in series as diagram below.  Finally connect the provided PWR Fan Extension Cable to motherboard.
   

3. Connect each 3-Pin ARGB LED Cable in series as diagram below. Then connect the provided ARGB LED  CABLEto motherboard or 1/0 Ports.
   

RADIATOR INSTALLATION

• For the best cooling performance, we recommend mounting the fans as an air-intake to your PC case.
• Refer to chassis manual for more information on Radiator Compatibility.
  

Connect Pump’s ARGB 3-Pin to either motherboard, /0’s ARGB 3-Pin, or to the provided External LED LIGHTING CONTROLLER for Daisy Chain Effect.

PUMP INSTALLATION

Intel and AMD BRACKET

Connect pump’s 4-Pin PWM Connector to motherboards 4-Pin PWM head

CLEANING INSTRUCTIONS

Please use a clean damp cloth to clean the product properly. Do not apply any soap or solvent agent on the surface to preserve its integrity.

SAFETY INSTRUCTIONS

For a proper use of the product, and to ensure your safety,please follow the following instructions:

1. Keep the device away from liquids, excess humidity or moisture to avoid any shock hazards. Should the device come into contact with liquids, please make sure to unplug the device immediately, store it in a dry place, and contact support for assistance.
2. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.
3. Should you have any other trouble operating the device properly and normal troubleshooting does not work, please unplug the device and contact our service for support.
4. Do not attempt to service or fix the device by yourself at any time.

DURATION OF WARRANTY

ADATA Technology Co., Ltd. provides a 5 year warranty period for this product unless regional laws and regulations state otherwise.

LIMITATION OF WARRANTY

This limited warranty covers only repairs or replacements of products manufactured by ADATA Technology Co. Ltd. and its authorized partners. Please note that ADATA is responsible for providing free repairs except for the following reasons:

1. The warranty label is altered, damaged or missing.
2. Product serial number does not conform to our original system.
3. Products purchased from an unauthorized agent.
4. Damage caused by natural calamity
5. Any abuse outside the intended product operation.

ONLINE CUSTOMER SERVIC

For frequently asked questions, additional information and service instruction please visit the product page at www.xpg.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>