XPG ADATA Alpha Wireless Gaming Mouse User Manual
- October 29, 2023
- XPG
Table of Contents
ADATA Alpha Wireless Gaming Mouse
User Manualhttp://www.adata.com/redirect/805
http://www.adata.com/redirect/806
PACKAGE CONTENTS
PRODUCT OVERVIEW
BLUETOOTH PAIRING INSTRUCTIONS
Pairing Mode: Press DPI button and switch to BT Mode for 3 seconds. The status
indicator on DPI button will turn Blue color for 2 seconds.
DPI Lighting Indicators
400| 800| 1600| 3200| 6400| 16000
Purple| Red
(default)| White| Orange| Yellow| Green
- All 6 buttons are programmable.
- DPI 100 is available when synchronized with XPG PRIME software.
- To update XPG ALPHA’s firmware, please connect the mouse to computer with the provided Type-C cable.
Scan the QR code for more information.
http://www.adata.com/redirect/807
PRODUCT SPECIFICATIONS
| PHYSICAL SPECIFICATIONS | TRACKING |
|---|---|
| Length | 128 mm (5.04 inch) |
| Width | 78 mm (3.07 inch) |
| Height | 40 mm (1.57 Inch) |
| Weight | 98±5 g |
| Cable Length | 1.8 m (5.9 feet) |
| Interface | USB Type-C |
| RESPONSIVENESS | VOLTAGE Et CURRENT |
| USB Polling Rate | 1000 Hz (lms) |
| Wireless Polling Rate | 1000 Hz (lms) |
| BATTERY LIFE | MATERIAL |
| Up to 60 hours (*depending on the usage) | Mouse Feet |
BATTERY CHARGING INSTRUCTIONS
| Pairing| Low Battery| Charging
---|---|---|---
Status Indicators| Blue (Breathing Effect)| Red (Breathing Effect)| Color
Lighting Effect by Setting
CLEANING INSTRUCTIONS
Please use a clean damp cloth to clean the product properly.
Do not apply any soap or solvent agent on the surface to preserve its
integrity.
SAFETY INSTRUCTIONS
For a proper use of the product, and to ensure your safety,please follow the
following instructions:
- Keep the device away from liquids, excess humidity or moisture to avoid any shock hazards. Should the device come into contact with liquids, please make sure to unplug the device immediately, store it in a dry place, and contact support for assistance.
- Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.
- Should you have any other trouble operating the device properly and normal troubleshooting does not work, please unplug the device and contact our service for support.
- Do not attempt to service or fix the device by yourself at any time.
DURATION OF WARRANTY
ADATA Technology Co., Ltd. provides a two-year warranty period for this
product unless regional laws and regulations state otherwise.
LIMITATION OF WARRANTY
This limited warranty covers only repairs or replacements of products
manufactured by ADATA Technology Co. Ltd. and its authorized partners.
Please note that ADATA is responsible for providing free repairs except for
the following reasons:
- The warranty label is altered, damaged or missing.
- Product serial number does not conform to our original system.
- Products purchased from an unauthorized agent.
- Damage caused by natural calamity
- Any abuse outside the intended product operation.
ONLINE CUSTOMER SERVICE
For frequently asked questions, additional information and service instruction
please visit the product page at www.xpg.com
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following
measures:
Federal Communication Commission Interference Statement
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.