XPG INVADER Mid-Tower Gaming Case User Guide
- June 4, 2024
- XPG
Table of Contents
INVADER Mid-Tower Gaming Case
User Guide
INVADER Mid-Tower Gaming Case
ADATA Technology Co., Ltd.
2F, No. 258, Liancheng Rd., Zhonghe Dist., New Taipei City 235, Taiwan
Product Name: XPG INVADER
Package Content
- INVADER Chassis
- INVADER Quick Installation Guide
- Warranty Guide
- Accessory Box
Accessory box
Figure | Parts Name | Used for | Q’ty |
---|---|---|---|
Screw T5*10mm | Case Fan | 20 | |
Screw #6-32*6mm | Power Supply Unit | 8 | |
Screw M3*6mm | 2.5″HDD | 16 | |
Screw #6-32*6mm | Motherboard, 3.5″ HDD | 17 | |
Movable Tie | Cable Management | 4 | |
Power Supply Unit | |||
Rear Holder | Power Supply Unit | 1 |
XPG INVADER MID-TOWER PC CHASSIS
A Magnetic Front Panel
B Magnetic Dust Filter
C Side Glass Panel
D 2x 120mm Fans Included
E 2.5” HDD/SSD Bracket
F PSU Bracket
Chassis I/O Port:
| Power Button
---|---
| Reset Button
| ARGB Lighting Toggle Button
| Hybrid Audio Port
| USB Ports
Side Panel
**Tempered Glass Side Panel and Front Bezel
**
Removing Tempered Glass Side Panel
Removing Front Bezel
Dust Filter
|
---|---
Drive Mounts
2.5”
Drive Installation:
2.5”
Drive Installation:
3.5”
Drive Installation:
PSU Mounts
PSU Installation:
Fan Mounts
Rear 120mm Fan Mount:
Front
120mm Fan Mounts:
Side
120mm Fan Mounts:
Top
120mm Fan Mounts:
PCI-E Slot Installation
|
|
---|---|---
Leads Installation Guide
Please consult the user manual of your motherboard manufacturer, then connect
these leads to the panel header on the motherboard.
USB 3.0 Connection: Please consult your motherboard manual to find out a
section of the USB 3.0 connection.
Audio Connection: Please refer to the motherboard installation to connect
the Audio Connector to avoid the device error and causing the motherboard
sound device to be damaged.
PRESS THE LIGHTING TOGGLE BUTTON | RGB EFFECT | ARGB EFFECT |
---|---|---|
Mode 1 | Red | |
Mode 2 | Green | |
Mode 3 | Blue | |
Mode 4 | Purple | |
Mode 5 | Yellow | |
Mode 6 | White | |
Mode 7 | Orange | |
Mode 8 | Green | |
Mode 9 | Four different color breathing modes | Four different color rainbow |
mode
Mode 10
Mode 11
Mode 12
Mode 13| OFF
Long Press| Enter/ exit music mode
Specifications
Dimension (HWD) | 470206482mm (18.748.1118.97 inch) |
---|---|
Form Factor | Mini-ITX, Micro-ATX, ATX |
Side Panel | 4mm Tempered Glass*1(Left Side) |
Color | Exterior & Interior : Black / White |
Material | SPCC |
3.5″ HDD/HDD tray | 2 |
2.5″ HDD/SSD tray | 2+2(Combo 3.5”/2.5”) |
IO Port | USB 3.0 2 , Audio1 |
HD Audio ( Mic & SW ) 1 , LED Control 1
Fan Support| Front: 3120mm , 2140mm Top: 2120mm
Rear: 1120mm Bottom :1120mm Right Side : 2120mm
Radiator Support| Front:360/240mm Top:240mm
Right Side : 1*240mm Rear:120mm
Clearance| CPU Cooler Height Limitation: 170mm
Graphic Card Length Height Limitation: 400mm
PSU Height Limitation: 225mm
CLEANING INSTRUCTIONS
Please use a clean damp cloth to clean the product properly.
Do not apply any soap or solvent agent on the surface to preserve its
integrity.
SAFETY INSTRUCTIONS
For the proper use of the product, and to ensure your safety, please follow
the following instructions:
- Keep the device away from liquids, excess humidity, or moisture to avoid any shock hazards. Should the device come into contact with liquids, please make sure to unplug the device immediately, store it in a dry place, and contact support for assistance.
- Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.
- Should you have any other trouble operating the device properly and normal troubleshooting does not work, please unplug the device and contact our service for support.
- Do not attempt to service or fix the device by yourself at any time.
DURATION OF WARRANTY
ADATA Technology Co., Ltd. provides a two-year warranty period for this
product unless regional laws and regulations state otherwise.
LIMITATION OF WARRANTY
This limited warranty covers only repairs or replacements of products
manufactured by ADATA Technology Co. Ltd. and its authorized partners.
Please note that ADATA is responsible for providing free repairs except for
the following reasons:
- The warranty label is altered, damaged, or missing.
- The product serial number does not conform to our original system.
- Products purchased from an unauthorized agent.
- Damage caused by natural calamity
- Any abuse outside the intended product operation.
ONLINE CUSTOMER SERVICE
For frequently asked questions, additional information, and service
instruction please visit the product page at www.xpg.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>