VIKING VK300 Akwa LED Ripple FX User Manual
- June 5, 2024
- VIKING
Table of Contents
VK300 Akwa LED Ripple FX
Akwa LED Ripple FX
Options lock: by default the unit will keep the display locked from
unauthorized changes.
To unlock the display:
Press the up and down in succession to input “up, down,up, down” which will
show 1234 on the display and the padlock will then change to the open padlock
Icon Use up and down buttons to go through menu options – the currently
selected one will highlight in YELLOW and show the value in
LCD Display Menu 1
SET: Select to alter preferences:
- DMX Address: Use to set the DMX Address of the fixture from 1 to 512 – don’t forget to press ENTER to confirm the change of address
- Run Mode: DMX, AUTO or MANL – Select DMX to control fixture via DMX or MANL to control fixture in stand-alone manual mode or AUTO for built-in programs (using options 3-5 below)
- Colour Speed
- Water 1 Speed
- Water 2 Speed
- Channel Mode: Used to select DMX protocol for 5 or 6 channel mode
- Temp Set: Set the Maximum temperature of the head. Recommended no higher than 75 degrees
- Active Fan: Used to select if the fan is ON or OFF by default
- Display set: Auto Display off is either ON or OFF after approx 20 seconds of inactivity
- DMX Fail: Set if fixture blacks out on DMX fail (YES) or holds last DMX state (NO)
- Line Dimmer: Select Lienaier Dimmer Curve (ON) or Standard (OFF)
- Senior Set: Factory Use Only DO NOT ADJUST.
5 Channel | 6 Channel | Value | Function |
---|---|---|---|
1 | 1 | 000-255 | Dimmer from off to 100% |
2 | 2 | 000-255 | Strobe from slow to fast |
3 | 3 | Colour | |
000-009 | Open ie; White | ||
010-019 | Blue | ||
020-029 | Amber i, | ||
030-039 | Red | ||
040-049 | Green | ||
050-059 | Magenta | ||
060-70 | Split Colour White to Blue | ||
071-081 | Split Colour Blue to Amber | ||
082-093 | Split Colour Amber to Red | ||
094-104 | Split Colour Red to Green | ||
105-117 | Split Colour Green to Magenta | ||
118-127 | Split Colour Magenta to White | ||
128-188 | Continuous Colour Change clockwise fast to slow | ||
189-255 | Cont Colour Change anticlockwise slow to fast | ||
4 | 4 | Ripple A FX Background Ripple | |
0 | Static | ||
001-127 | Clockwise ripple slow to fast | ||
128 | Static | ||
129-255 | Anticlockwise ripple slow to fast | ||
5 | 5 | Ripple B FX Foreground Ripple | |
0 | Static | ||
01/01/0127 | Clockwise ripple slow to fast | ||
128 | Static | ||
129-255 | Anticlockwise ripple slow to fast | ||
6 | Reset | ||
0-250 | No Effect | ||
251-255 | Reset all functions |
LCD Display Menu 2
MANL: Stand Alone Control:
Select MANL: To use in stand-alone mode select this option in the centre of
the LCD Display This will give a list of all the parameters for the fixture
which can be set manually from 000 to 255 Should the power be interrupted the
unit will restart with the same paramaters previously set and continue
operation accordingly.
INFO: Information of fixture
This information is for Factory use only.
Language: Used to toggle between En (English) and Chinese, just press Enter to reverse if accidentally pressed into Chinese.
Turn Display, used to turn display upside down when hanging fixture in unusual positions to make reading disply easier. Just press Enter and Func to toggle display between the 2 settings
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>