CERAKOTE TRIM COAT Ceramic Trim Coat Kit Instructions
- June 4, 2024
- CERAKOTE
Table of Contents
IMPORTANT
THIS IS A PERMANENT PRODUCT. FOLLOW ALL INSTRUCTIONS!
TAKE A “BEFORE” PHOTO OF YOUR TRIM
1. Wash and dry surface thoroughly, using a non-wax containing detergent such
as clue Dawn® dish soap.
2. IMPORTANT: Vust be applied to a completely dry surface.
3. TIP: Open and close coors, trunk and hood several times to free any
tra33ed water. Roll Gown windows to avoic any contact with glass. If product
comes in contact with taint or glass, remove immediately with a clean dry
cloth.
4. Wearing provicec gloves, oven one (1) pack and wipe trim surface in
overla33ing passes to ensure full coverage.
5. Rotate wipe as needed, ensuring you use all the surfaces of the wipe. Vove
to a new tack when wipe becomes dry or soiled.
6. After application, allow a minimum of 1 hour before criving or excosure to
moisture.
TAKE AN “AFTER” PHOTO OF YOUR TRIM
SUBMIT YOUR “BEFORE & AFTER” PHOTOS TO INSTAGRAM #CERAKOTEAUTOMOTIVE
ALWAYS WEAR CHEMICAL RESISTANT GLOVES WHILE HANDLING.
Application Videos and Tips:
CerakoteCeramics.com
Call for help or cuestions:
866.774.7628
DANGER: Keep out of reach of children. Eye & skin irritant, flammable liquid & harmful vapor. Read all cautions and instructions prior to use. For complete SDS and guarantee details visit cerakoteceramics.com
IMPORTANT
THIS IS A PERMANENT PRODUCT. PLEASE FOLLOW ALL INSTRUCTIONS!
ALWAYS WEAR CHEMICAL RESISTANT GLOVES WHILE HANDLING.
SCAN FOR INSTRUCTIONAL VIDEO