Cerakote Ceramics Tire Coat Rapid Instructions
- July 30, 2024
- Cerakote Ceramics
Table of Contents
Cerakote Ceramics Tire Coat Rapid
IMPORTANT
- READ ALL INSTRUCTIONS BEFORE STARTING
- TAKE A “BEFORE” PHOTO OF YOUR TIRES
PREPARING THE SURFACE
- Thoroughly wash your tires with your preferred car wash soap, and let the tires dry completely.
- Shake the bottle for 1 minute to ensure the coating is properly mixed prior to application. Attach the included spray nozzle to the bottle of Cerakote”Rapid Ceramic Tire Coat.
Note
There is enough coating in this bottle to complete multiple vehicles.
RAPID CERAMIC TIRE COAT APPLICATION
- Spray Cerakote Rapid Ceramic Tire Coat liberally onto the surface of the applicator.
- Coat only one tire at a time. Spread the coating evenly over the surface of the tire using long strokes. Pay extra attention to areas of the tire that have grooves, indentations, or protrusions.
- Using a clean microfiber cloth, immediately wipe away any excess coating or over-spray from areas outside of the tire surface.
- To achieve a darker black tire look, wait at least 15 minutes before repeating.
- Repeat the process for all remaining tires.
- Allow the coating to cure for two hours before exposing to moisture, Wait 24 hours before washing tires.
Congratulations
- You have achieved maximum protection!
- TAKE AN “AFTER” PHOTO OF YOUR TIRES
MEET THE FAMILY OF CERAKOTE CERAMIC PRODUCTS
- SUBMIT YOUR “BEFORE & AFTER” PHOTOS TO INSTAGRAM #CERAKOTECERAMICCOATINGS
- WWW.CERAKOTECERAMICS.COM
APPLICATION INSTRUCTIONS
- WE STRONGLY RECOMMEND WATCHING THE INSTRUCTIONAL VIDEO, WHICH SHOWS THIS PROCESS VISUALLY
- SCAN WITH YOUR PHONE FOR A HELPFUL INSTRUCTIONAL VIDEO
- cerakoteceramics.com/tire-instructions
CONTACT
- We’re here to help. Give us a call at 866.774.7628 or email us at technicalsupport@cerakoteceramics.com
Read User Manual Online (PDF format)
Loading......