CERAKOTE Ceramic Glass Coat Application Instructions
- June 10, 2024
- CERAKOTE
Table of Contents
CERAKOTE Ceramic Glass Coat Application
- Apply Step 1 Glass Cleaner Wipe onto the clean window, scrubbing thoroughly. Use 1 wipe per each half of the windshield.
- Allow Glass Cleaner to sit for 2 minutes.
- Rinse extremely well with running water, ensuring no cleaner is left on the window or surrounding surfaces.
- Note: If the Step 1 Cleaner gets on anything but glass, don’t worry, just wipe it off immediately with a clean damp cloth.
- Dry the glass completely, any water present will negatively affect the coating.
- Dispense a small line of Step 2 Ceramic Glass Coating along the entire length of the provided Microfiber Applicator Sponge. Apply using a cross-hatch (#) pattern, first using vertical lines, then horizontal lines. Dispense additional coating onto the Applicator Sponge as needed, ensuring the applicator stays wet until the entire windshield is coated. Any remaining coating can be used at a later time.
- Allow coating to cure for 5-10 minutes.
- Buff off with the provided finishing towel, switching sides of the towel to completely buff the glass clean.
- Note: If Step 2 Glass Ceramic gets on anything but glass, don’t worry, just wipe it off immediately with a clean dry cloth.
- DO NOT expose to moisture for at least 1 hour, allow 24 hours before washing.
IMPORTANT
THIS IS A PERMANENT PRODUCT. PLEASE FOLLOW ALL INSTRUCTIONS! ALWAYS WEAR
CHEMICAL-RESISTANT GLOVES WHILE HANDLING.
Application Videos and
Tips:CerakoteCeramics.com
Call for help or questions: 966 774 7628
DANGER: Keep out of reach of children. Eye & skin irritant, flammable
liquid & harmful vapor. Read all cautions and instructions prior to use. For
complete SDS and guarantee details visit
cerakoteceramics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>