AZZARO BT-6058 Wireless Headphone User Manual
- June 4, 2024
- AZZARO
Table of Contents
AZZARO BT-6058 Wireless Headphone
THE OBJECTS IN THE BOX
- WIRELESS Headphone
- USB Type C Charging Cable
WIRELESS HEADPHONE
- Next/Volume up
- Power On/Off
- Previous/Volume down
- indicator Light
- Charging
- Aux in
- Mic
BUTTON ICON
Power Switch:
- Long press to turn on / off.
- Short press to play / pause when music playing or answer / reject the phone call.
- Press twice to redial the last phone call.
- Press 3 times to activate the voice assistant.
Please Note:
Not all mobile phones support all the functions listed above. Please refer to your cell phone’s user’s manual for further information.
WIRELESS Music mode:
- Short press + to play the next song.
- Short press – to play the previous song.
- Long press + to volume up.
- Long press – volume down.
MOBILE PHONE CONNECTION:
- Step 1: Open the Bluetooth setting on your phone or tablet and click “search device” . iPhones will search for Bluetooth devices automatically.
- Step 3: The phone or tablet will indicate when the pairing is successful. The character on the display of the product will stop flickering.
- Step 2: You have found the product when the screen displays the character “AZZARO HEADPHONES ” , Click on it on your device to pair the connection.
CHARGING
Pleas make sure the product is fully charged for the first use. Charge the product with the provided USB cable which is compatible with any computer or other 5V output charger. The charge Bluetooth Indicator will be in red while charging, then when the battery is fully charged it will turn off.
Product Specifications
Bluetooth Solution: V 5.0 Support A2DP,AVRCP,HSP,and HFP profile
- Driver Unit: 40mm;
- Impedance:16 ohms;
- Sensitivity: 97dB +/- 3dB;
- Max. Input Power: 20mW;
- Frequency Response: 20Hz-20kHz;
Features:
- Working distance: 10 M
- Built-in rechargeable Battery: 3.7V,200mAh
- Playing time: up to 8 hours
- Phone talk: up to 8 hours
- Charging Time: 1.5~2.0 hours
- Stand-by time: up to 15 days
TIPS
- This product is not a toy.
- When using it for the first time, charging for more than 1-2 hours is good for the battery.
- Please charge the product if the product hasn’t been used for a long time (more than one month)
- Please keep away from fire and water.
- To prevent possible hearing damage, do not listen at high volume levels for long periods. Do not use the headset while driving or cycling or in a situation where you should be able to hear other sounds. As a guide to setting the volume level, check that you can still hear your own voice when speaking normally while listening with the headset.
Importer: Manufactured by: admin group www.admgroup.com
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Warning
To assure continued compliance, any changes or modifications not expressly
approved by the party. Responsible for compliance could void the user’s
authority to operate this equipment.
FCC Statement
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- I ncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in the portable exposure condition with restriction. FCC ID : 2AXWJ- LE331101 IC : 26678-LE331101.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>