GoodHome Laminate Worktop Instruction Manual

GoodHome Laminate Worktop

These instructions are for your safety. Please read them thoroughly before use and retain for future reference.

Available separately

Before you start

• Important information. Read carefully and understand the step sequence before starting work.

• Retain these instructions for future reference.

• If you need to store the worktop for any length of time, ensure it is well supported throughout its length in an even room temperature.

• Make a final check for size, design and style compatibility of your worktop before starting work.

• Take extreme care if using sharp implements when removing packaging to avoid damaging the product or causing injury.

• Make sure you have all tools and equipment required for your installation as indicated in these instructions.
  Make sure you fully understand their instructions and use.
  Hint – To avoid any uncertainty, check out appropriate assistance guides typically found on video sharing websites.

• For Power Tools become familiar with their setting and operation first.
  Hint – Practice the expected operation on a surplus piece of similar material!!

• Check wall measurements twice where the worktop is intended to fit.
  Identify any irregularities in straightness and squareness. Make sure any deviations are transferred to the worktop sizing to prevent pinch points or excessive gaps after fitting.
  Hint – Consider making a template first in thin Hardboard sheet to assure exact fit.
  Once assured, transfer the sizes to the worktop to assure correct final sizing.

• After marking out the worktop, check dimensions twice before cutting.
  To allow for natural material movements make sure to allow for a 3mm minimum gap between worktop edge and wall on final fit.

• If your worktop installation will include hardware such as tie-bolts, joint biscuits, joining strips or edging follow any instructions provided with them.

• If your worktop is located over an electrical appliance fit a heat/moisture barrier protector, available separately.

• Ensure the height set for the worktop considers any ventilation gap advised in the instructions for any free standing appliance included in the installation.

• If your worktop installation will require joint sealer or adhesive, make sure to follow the application instructions provided with it.

Safety

• Always wear appropriate personal protective equipment when operating power tools.
• Always have good ventilation when using adhesives and wear protective mask to protect against fumes.

Care & maintenance

• Use warm soapy water and a soft cloth to clean the surface of the product.
  Once clean be sure wipe dry with a clean cloth.

• Avoid – Cleaning products, such as abrasive powders, glass wool or scouring pads, as well as cleaning products containing acetone, chlorine or solvents.

• Avoid – Steam cleaners.

• Immediately remove any dirty marks and wipe dry any spillages as soon as they occur.

Guarantee

At GoodHome we take special care to select high quality materials and use manufacturing techniques that allow us to create ranges of products incorporating design and durability. That’s why we offer a 25 year guarantee against manufacturing defects on our worktops. This product is guaranteed for 25 years from the date of purchase, if bought in store, or delivery, if bought online, for normal (non-professional or commercial) household use. You may only make a claim under this guarantee upon presentation of your sales receipt or purchase invoice. Please keep your proof
of purchase in a safe place. The guarantee covers product failures and malfunctions provided the worktop was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with standard practice and with the information contained above and in the user manual. This guarantee does not cover defects and damage caused by normal wear and tear of worktop and damage that could be the result of improper use, faulty installation or assembly, neglect, accident modification of the product. The guarantee is limited to parts recognised as defective. It does not, in any case, cover ancillary costs (movement, labour) and direct and indirect damage. If the worktop is defective, we will replace. Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee related queries should be addressed to the store you purchased this product from. The guarantee is in addition to and does not affect your statutory rights.

Addresses

Manufacturer • Fabricant • Producent Producător • Fabricante:
UK Manufacturer:
Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom

EU Manufacturer:
Kingfisher International Products B.V. Rapenburgerstraat 175E
1011 VM Amsterdam
The Netherlands
www.kingfisher.com/products

www.diy.com
www.screwfix.com
www.screwfix.ie

To view instruction manuals online, visit www.kingfisher.com/products

IMPORTANT – Radiused Edge (Post Formed) Worktops.
An alternative to avoid precise joint preparation detailed in the installation images overleaf is to use aluminium joining strips (available separately) for your worktop installation. These allow joints to remain as straight saw cuts with worktops sufficiently aligned by cabinet fitting only. This means routing operations, tie bolts and joint biscuits are not required.

References

• Bricolage, jardinage et aménagement de la maison | Castorama
• B&Q | DIY Products at Everyday Low Prices | DIY at B&Q

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>