SwanStation 10A 3 In 1 Foldable Wireless Apple Charging Station User Manual
- June 14, 2024
- SwanStation
Table of Contents
Scout for elegance
Multifunctional Wireless Charging Station
User Manual
Product overview
Before using this praduct, please read ths user manual thoroughly and take
good care of it
1. Wireless charging area for phone
2. Clock display screen
3. Brightness touch adjustment
4. Phone charging indicator
5. Watch charging indicator
6. Earbud charging case charging indicator
7. Wireless charging area for watch| 8. USB-C interface
9. Wireless charging area for earbuds charging case
10. Time setting”-” button
11. Time setting”+” button
12. Time setting button
13. Wireless charging switch button for phone
---|---
Product compatibility
Please refer 1o the websit’s images o text descriptions for information on specific compatible types of phones, earbuds charging cases, and watches.
Product instructions
- Connect one end of the power cable to the USB-C port of the product and the other end to the charging adaper.
- Adjust wireless charging pads for phone and watch to appropriate posiions as shown in the ilustration on the right before use.
- Place your phone, watch and earbud charging case on the corresponding wireless charging area to charge.
- Single press the “Wireless charging swich button for phone” o turn off the wireless charging function for your phone, without interrupting the charginge of other devices To restart wireless charging for phone, press the button again.
Note:
It may not be feasible to charge al three devices (the phone, the earbud
charging case, and the watch) smultaneously if you don’t use a charger higher
than 18W power.
Time setting:
- Press the “Time Setting” button to selectthe 12/24 hour system.
- Toset the hour: Press and hold the “Time Setting” button for 3 seconds to enter setting mode, then adjust the hour using the *+/-” button.
- Toset the minutes: Press and hold the “Time Setting button for 3 seconds, then brifly press the “Time Setting” button again to enter setting mode, and adjust the minutes using the “+/-* button.
Note:
- After setting, wait for 5 seconds to complete the setting.
- The clock display wil un fast or slow due to high or low ambient temperature, please adjust the clock n time.
Display screen adjustment:
Click the brightness touch adjustment con to adjust the screen brightness. The
screen brightness can be adjusted in four levels that cycle through
sequentialy.
| Level | Level 1 | Level 2 | Level 3 | Level 4 |
|---|---|---|---|---|
| Display brightness | Low | Medium | High | OFF |
Attention
- This clock is powered by a lithium battery. If it is not powered for a long time, the battery may be depleted and enter sleep mode. It is recommended to power it every 15 days and charge the battery for at least 30 minutes each time to ensure normal use of the clock and extend the battery’s lifespan.
- When the battery is completely depleted, the clock will restore factory settings and you will need to reset the time.
- This product has intelligent energy-saving function. It will automatically turn off the time display within 10 minutes when not connected to the power supply.
Indicator light guide
Charging status| Plugged in| Standby| Charging| Fully charged| Abnormal
objects detected
---|---|---|---|---|---
Indicator light| On for 3 Sec| OFF| Green light| Green light| Red light
flashes
Charging distance and folding angle
- Do not fold the wireless charging pad at an angle over 90 degrees to avoid damage.
- To ensure that the charging station works properly, the phone case should not exceed 5 mm, the earbud case should not exceed 4 mm, and the watch should be closely attached to the charging area.
- Check and adjust the device’s position in the appropriate charging area if it cannot charge properly.
Specification
Input: SV/3A 9V/2A 12V/1.5A
Charging phone output: 10W (Max)
Charging watch output: 2.5W (Max)
Charging earbuds output: 3.5W (Max)
**** Warning
-
Do not disassemble or change the internal structure of this product by yourself to avoid danger.
-
Please use this product in the temperature range of 0°C -40°C (32 °F-104 °F). Do not use this product in high temperature and humid place to avoid equipment failure.
-
Do not place metallic foreign objects in the wireless charging area.
-
Do not throw this product into the fire, otherwise may cause the equipment to catch fire or explode.
-
This product contains sensitive electronic components, including a battery, and can be damaged, impair functionality, or cause injury if dropped, burned, punctured, crushed.
-
Do not expose this product to high temperature or around heat generating devices such as heaters, microwave ovens, ovens, etc.
-
Do not allow children or pets to swallow this product to avoid injury or other hazards.
-
Radio waves generated by this product may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and this product. Consult your physician and medical device manufacturer for information specific to your medical device.
Stop using this product if you suspect it is interfering with your pacemaker, defibrillator, or any other medical device. -
Please comply with local regulations for the disposal of this product and its accessories, and support recycling operations.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and receiver. (3) Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. (4) Consult the dealer or an experienced radio/TV
technician for help.
IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject
to the condition that this device does not cause harmful interference.
RSS-Gen Issue 5 March 2019
This device contains licence-exempt transmitter (s)/receiver (s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated With
minimum distance 20 cm between the radiator and your body.
Follow us to get the latest news and activities: 
For more product information, please visit:
www.swanscout.com
For customer support, please contact:
support@swanscout.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>