hama 00200760 USB Hard Disk Housing Instruction Manual

June 4, 2024
Hama

hama 00200760 USB Hard Disk Housing

Package Contents

  1. USB hard disk housing
  2. USB Cable
  3. USB Adapter
  4. Screw
  5. These operating instructions

Safety Notes

  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not operate the product outside the power limits given in the specifications.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Keep this product, as all electrical products, out of the reach of children!Use the product for its intended purpose only.
  • Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
  • The product is intended for indoor use only.
  • Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
  • Do not use the product in areas where the use of electronic devices is not permitted.
  • Do not drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately according to locally applicable regulations.

Warning

  • Ensure that data transfer is complete before removing a hard drive from the hard drive enclosure.
  • Always use the Eject function of your operating system (computer, smartphone, tablet/Windows, Mac OS, Android) before removing a hard drive from the hard drive enclosure.
  • If you do not do this, data may be lost.
  • Under no circumstance does Hama GmbH & Co KG accept liability for loss of data stored on data storage media.

Startup and Operation

  • Carefully undo the screw of the hard drive enclosure using a suitable screwdriver.
  • Now slide the lid of the hard drive enclosure to the rear.
  • Carefully insert the 2.5-inch hard drive into the enclosure.
  • Close the enclosure again by tightening the screw.
  • Switch on your computer and boot the system.
  • Connect the product to a free USB port on your computer.
  • You do not have to install drivers; the computer will automatically recognize the product.
  • If necessary, follow the instructions for your operating system.
  • The product can now be used.
Note
  • If the hard drive is already partitioned and data is on the hard drive, you can access that data.
  • New or unpartitioned hard drives must be partitioned and formatted after initialization. Refer to the operating system manual for your computer/notebook for the necessary steps to do so.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or failure to observe the operating instructions and/or safety notes.

Technical Data


Operating voltage / current consumption| 5 V  max. 900 mA
Compatibility| USB-C port USB-A port
System requirements| Windows 11 / 10 / 8 / 7 Mac OS 10.8 ≥
USB specification| USB 3.2 Gen1
Hard drive height| max. 9.50 mm

Note

If there is interference or the product no longer responds, unplug the product, wait a few seconds and then plug it in again.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals