Silent Angel Forester F1 Dual 5V Linear Power Supply User Guide
- June 4, 2024
- FORESTER
Table of Contents
Silent Angel Forester F1 Dual 5V Linear Power Supply User Guide
Package Contents
- F1 x1
- Power Cord x1
- 5.5mm x 2.1mm DC Plug Cable x2
- Quick Start Guide x1
- Warranty Card x1
Start to Use
Check and Set Voltage Selector at the bottom of F1
Front Panel, Rear Panel, and Bottom
-
Output 1 Over Temperature
Light on when over temperature protection of output 1 is activated. -
Output 1 Status
Green light on when output 1 power is on and output is good. Red light on when over current protection is activated and output is off -
Output 2 Status
Green light on when output 2 power is on and output is good. Red light on when over current protection is activated and output is off. -
Output 2 Over Temperature
Light on when over temperature protection of output 2 is activated. -
AC Input
AC power input. -
Fuse Holder
Fuse is inside the fuse holder. -
Power Switch
Power switch for controlling main power. -
5V DC Output Port 2*
5V DC output 2A max. (DC plug 5.5mm x 2.1mm, tip carries +5V) -
CD 5V DC Output Port 2*
5V DC output 2A max. (USB Type-A) g -
5V DC Output Port 1*
5V DC output 2A max. (USB Type-A) -
5V DC Output Port 1*
5V DC output 2A max. (DC plug 5.5mm x 2.1mm, tip carries +5V) -
AC Voltage Selector
Select proper AC voltage for AC INPUT
DO NOT connect to USB and DC plug for the same port at the same time.
Silent Angel
2020 Thunder Data Co. Ltd. All rights reserved.
support@thunder-data.com http://www
.silent-angel-audio.com/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>