PHOENIX CONTACT PT 1 PCB Connector Instruction Manual
- June 25, 2024
- PHOENIX CONTACT
Table of Contents
- PHOENIX CONTACT PT 1 PCB Connector
- Specifications
- Your advantages
- Technical data
- Connection data
- Material specifications
- Dimensions
- Mechanical tests
- Environmental and real-life conditions
- Electrical tests
- Packaging specifications
- Drawing
- Approvals
- Classifications
- Environmental product compliance
- Accessories
- MORE INFORMATION
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PHOENIX CONTACT PT 1 PCB Connector
Specifications
- Item number : 1318602
- Packing unit : 250 pc
- Minimum order quantity: 1,000 pc
- Product key: AABAJD
- GTIN: 4063151601638
- Weight per piece (including packing): 4.34 g
- Weight per piece (excluding packing): 4.227 g
- Country of origin : CN
1318602
https://www.phoenixcontact.com/us/products/1318602
Please be informed that the data shown in this PDF document is generated from our online catalogue. Please find the complete data in the user documentation. Our general terms of use for downloads are valid.
PCB connector, nominal cross section: 1.5 mm2, colour: green, nominal current: 10 A, rated voltage (III/2): 400 V, contact surface: Tin, contact connection type: Socket, number of rows: 1, number of positions: 4, product range: PT 1,5/..-PH CLIP, pitch: 5 mm, connection method: Screw connection with tension sleeve, screw head form: H1L Slotted Phillips recess, conductor/PCB connection direction: 0 °, plug-in system: COMBICON PST 1,3, locking: without, mounting: without, type of packaging: packed in cardboard
Your advantages
- The well-known connection principle allows worldwide use
- Low-temperature rise, thanks to maximum contact force
- High terminal block capacity thanks to rectangular terminal block space
- Can be snapped into device housing thanks to CLIP geometry
Commercial data
| Item number | 1318602 |
|---|---|
| Packing unit | 250 pc |
| Minimum order quantity | 1,000 pc |
| Note | Made to order (non-returnable) |
| Product Key | AABAJD |
| GTIN | 4063151601638 |
| Weight per piece (including packing) | 4.34 g |
| Weight per piece (excluding packing) | 4.227 g |
| Country of origin | CN |
Technical data
Product properties
| Product Type | PCB connector |
|---|---|
| Product family | PT 1,5/..-PH CLIP |
| Product line | COMBICON Connectors S |
| Number of positions | 4 |
| Pitch | 5 mm |
| Number of rows | 1 |
Electrical properties
| Nominal current IN | 10 A |
|---|---|
| Nominal voltage UN | 400 V |
| Degree of pollution | 3 |
| Contact resistance | 2.5 mΩ |
| Rated voltage (III/3) | 250 V |
| Rated surge voltage (III/3) | 4 kV |
| Rated voltage (III/2) | 400 V |
| Rated surge voltage (III/2) | 4 kV |
| Rated voltage (II/2) | 630 V |
| Rated surge voltage (II/2) | 4 kV |
Connection data
Connection technology
| Type | Plug for pin stripe |
|---|---|
| Connector system | COMBICON PST 1,3 |
| Nominal cross-section | 1.5 mm² |
| Contact connection type | Socket |
Interlock
| Locking type | without |
|---|---|
| Mounting flange | without |
Conductor connection
| Connection method | Screw connection with tension sleeve |
|---|---|
| Conductor/PCB connection direction | 0 ° |
| Conductor cross-section rigid | 0.2 mm²…. 1.5 mm² |
| Conductor cross-section flexible | 0.2 mm²…. 1.5 mm² |
| Conductor cross-section AWG | 26 … 14 |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 |
mm² … 1 mm²
Conductor cross-section, flexible, with ferrule, with plastic sleeve| 0.25 mm²
… 1 mm²
Stripping length| 6 mm
Tightening torque| 0.35 Nm… 0.4 Nm
Material specifications
Material data – contact
Note| WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC
JESD 201
---|---
Contact material| Cu alloy
Surface characteristics| hot-dip tin-plated
Metal surface terminal point (top layer)| Tin (4 – 8 µm Sn)
Metal surface contact area (top layer)| Tin (4 – 8 µm Sn)
Material data – housing
| Colour (Housing) | green (6021) |
|---|---|
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2- 13 | 775 |
| Temperature for the ball pressure test according to EN 60695- 10-2 | 125 °C |
Dimensions
Dimensional drawing|
---|---
Pitch| 5 mm
Width [w]| 20 mm
Height [h]| 12.3 mm
Length [l]| 14.7 mm
Mounting
| Drive form screw head | Slotted Phillips recess (H1L) |
|---|
Mechanical tests
Test for conductor damage and slackening
| Specification | IEC 60999-1:1999-11 |
|---|---|
| Result | Test passed |
Pull-out test
| Specification | IEC 60999-1:1999-11 |
|---|---|
| Conductor cross-section/conductor type/tractive force setpoint/actual value |
0.2 mm² / solid / > 10 N
0.2 mm² / flexible / > 10 N
| 1.5 mm² / solid / > 40 N
---|---
1.5 mm² / flexible / > 40 N
Insertion and withdrawal forces
| Result | Test passed |
|---|---|
| No. of cycles | 10 |
| Insertion strength per post. approx. | 4.5 N |
| Withdraw strength per post. approx. | 5.5 N |
Torque test
| Specification | IEC 60999-1:1999-11 |
|---|
Resistance of inscriptions
| Specification | IEC 60068-2-70:1995-12 |
|---|---|
| Result | Test passed |
Visual inspection
| Specification | IEC 60512-1-1:2002-02 |
|---|---|
| Result | Test passed |
Dimension check
| Specification | IEC 60512-1-2:2002-02 |
|---|---|
| Result | Test passed |
Environmental and real-life conditions
Vibration test
| Specification | IEC 60068-2-6:2007-12 |
|---|---|
| Frequency | 10 – 150 – 10 Hz |
| Sweep speed | 1 octave/min |
| Amplitude | 0.35 mm (10 Hz…. 60.1 Hz) |
| Acceleration | 5g (60.1 Hz … 150 Hz) |
| Test duration per axis | 2.5 h |
Durability test
| Specification | IEC 60512-5:1992-08 |
|---|---|
| Impulse withstand voltage at sea level | 4.8 kV |
| Contact resistance R1 | 2.5 mΩ |
| Contact resistance R2 | 2.6 mΩ |
| Insertion/withdrawal cycles | 10 |
Climatic test
| Specification | ISO 6988:1985-02 |
|---|---|
| Corrosive stress | 0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle |
| Thermal stress | 100 °C/168 h |
| Power-frequency withstand voltage | 2.21 kV |
Ambient conditions
Ambient temperature (operation)| -40 °C … 100 °C (dependent on the derating
curve)
---|---
Ambient temperature (storage/transport)| -40 °C … 70 °C
Relative humidity (storage/transport)| 30 % … 70 %
Ambient temperature (assembly)| -5 °C … 100 °C
Electrical tests
Thermal test | Test Group C
| Specification | IEC 60512-5-1:2002-02 |
|---|---|
| Tested a number of positions | 16 |
Insulation resistance
| Specification | IEC 60512-3-1:2002-02 |
|---|---|
| Insulation resistance, neighbouring positions | 1012 Ω |
Air clearances and creepage distances
| Specification | IEC 60664-1:2007-04 |
|---|---|
| Insulating material group | I |
| Comparative tracking index (IEC 60112) | CTI 600 |
| Rated insulation voltage (III/3) | 250 V |
| Rated surge voltage (III/3) | 4 kV |
| minimum clearance value – non-homogenous field (III/3) | 3 mm |
| minimum creepage distance (III/3) | 3.2 mm |
| Rated insulation voltage (III/2) | 400 V |
| Rated surge voltage (III/2) | 4 kV |
| minimum clearance value – non-homogenous field (III/2) | 3 mm |
| minimum creepage distance (III/2) | 3 mm |
| Rated insulation voltage (II/2) | 630 V |
| Rated surge voltage (II/2) | 4 kV |
| minimum clearance value – non-homogenous field (II/2) | 3 mm |
| minimum creepage distance (II/2) | 3.2 mm |
Packaging specifications
| Type of packaging | packed in cardboard |
|---|
Drawing
Derating curve for PT 1,5/…PH 5,0 CLIP with PST 1,3/…-5,0
Approvals
TIPS: To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1318602
**cULus Recognized**
Approval ID: E60425-20030211
Nominal| voltage| UN| Nominal| current| IN| Cross section| AWG| Cross|
section| mm2
Use group B
300 V| 10 A| 28 – 14| –
Use group D
300 V| 10 A| 28 – 14| –
**VDE Zeichengenehmigung**
Approval ID: 40044443
Nominal| voltage| UN| Nominal| current| IN| Cross| section| AWG| Cross
section| mm2
| 320 V| 10 A| –| 0.2 – 1.5
Classifications
CLASS
| ECLASS-11.0 | 27460202 |
|---|---|
| ECLASS-12.0 | 27460202 |
| ECLASS-13.0 | 27460202 |
ETIM
| ETIM 9.0 | EC002638 |
|---|
UNSPSC
| UNSPSC 21.0 | 39121400 |
|---|
Environmental product compliance
EU RoHS
| Fulfills EU RoHS substance requirements | Yes, No exemptions |
|---|
China RoHS
| Environment friendly use period (EFUP) | EFUP-E |
|---|
No hazardous substances above the limits
EU REACH SVHC
| REACH candidate substance (CAS No.) | No substance above 0.1 wt% |
|---|
Accessories
SZS 0,6X3,5 – Screwdriver
1205053: https://www.phoenixcontact.com/us/products/1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
PST 1,3/ 4-H-5,0 – Pin strip
1705481
https://www.phoenixcontact.com/us/products/1705481
Pin strip, nominal cross section: 1.5 mm2, colour: black, nominal current: 12 A (depends on the plug used), rated voltage (III/2): 320 V, contact surface: Tin, contact connection type: Pin, number of potentials: 4, number of rows: 1, number of positions: 4, number of connections: 4, product range: PST 1,3/..-H, pitch: 5 mm, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 6.8 mm, plug-in system: COMBICON PST 1,3, locking: without, mounting: without, type of packaging: packed in cardboard, The maximum current depends on the plug used. The lower of the two current values applies to the plug and pin strip. The pin strip is made of highly temperature-resistant plastic and is thus suitable for the reflow process.
PST 1,3/ 4-5,0 R56 – Pin strip
1720314
https://www.phoenixcontact.com/us/products/1720314
Pin strip, nominal cross section: 1.5 mm2, colour: black, nominal current: 12 A (depends on the plug used), rated voltage (III/2): 320 V, contact surface: Tin, contact connection type: Pin, number of potentials: 4, number of rows: 1, number of positions: 4, number of connections: 4, product range: PST 1,3/..-V, pitch: 5 mm, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm, plug-in system: COMBICON PST 1,3, locking: without, mounting: without, type of packaging: 56 mm wide tape, The maximum current depends on the plug used. The lower of the two current values applies to the plug and pin strip. The pin strip is made of highly temperature-resistant plastic and is thus suitable for the reflow process.
P ST 1,3/ 4-5,0 – Pin strip
1933202
https://www.phoenixcontact.com/us/products/1933202
Pin strip, nominal cross section: 1.5 mm2, colour: black, nominal current: 12 A (depends on the plug used), rated voltage (III/2): 320 V, contact surface: Tin, contact connection type: Pin, number of potentials: 4, number of rows: 1, number of positions: 4, number of connections: 4, product range: PST 1,3/..-V, pitch: 5 mm, mounting: THR soldering, pin layout: Linear pinning, solder pin [P]: 3.5 mm, plug-in system: COMBICON PST 1,3, locking: without, mounting: without, type of packaging: packed in cardboard, The maximum current depends on the plug used. The lower of the two current values applies to the plug and pin strip. The pin strip is made of highly temperature-resistant plastic and is thus suitable for the reflow process.
MORE INFORMATION
- Phoenix Contact 2024 © – all rights reserved https://www.phoenixcontact.com
- Phoenix Contact USA 586 Fulling Mill Road
- Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com
Apr 18, 2024, 8:51 PM Page 11 (11)
FAQ
- Q: What is the maximum nominal current supported by the PCB connector?
- A: The maximum nominal current supported is 10 A.
- Q: What is the nominal voltage rating of the PCB connector?
- A: The nominal voltage rating is 400 V.
References
- Phoenix Contact USA
- PT 1,5/ 4-PH-5,0 CLIPBD12V-ERD - PCB connector - 1318602 | Phoenix Contact
- PST 1,3/ 4-H-5,0 - Pin strip - 1705481 | Phoenix Contact
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>