Abeeway ABEW-COMPTRAC-LNA Compact Tracker User Guide
- June 4, 2024
- Abeeway
Table of Contents
Compact tracker
The Abeeway compact tracker is a multi-mode tracker that uses 3 replaceable AA format batteries for a long battery lifetime and easy replacement. It combines GPS, Low Power-GPS (LP-GPS) (an ultra-low power assisted GPS patented by Abeeway that also optimizes Timeto-First Fix in difficult conditions), Wi-Fi, LoRaWAN® and BLE radios with embedded sensors to support accurate outdoor and indoor geolocation. This tracker is equipped with a rugged waterproof casing that is designed to withstand harsh surroundings enabling seamless asset tracking and management in any industrial environment – whether it is for heavy-duty assets, inventory, or livestock.
Key product features
The Abeeway compact tracker provides you with the exibility you need to adapt
your tracker’s behavior to your use case, selecting the right operating mode
and geolocation
technology.
Reed switch
Key precautions for activation of the Compact tracker with a magnet
- Do not attempt to activate the Compact tracker when in the proximity of strong magnetic fields (ie, magnetic mounts)
- Use a strong enough magnet, and make sure you know where are the poles. A magnet that has been successfully tested with the reed switch can be purchased from here
Magnet sequence to activate the compact tracker
For MCU FW 2.2 and above, you need to carry out the following sequence with
the magnet next to the reed switch:
Note: You should always start the sequence with the magnet far away from
the tracker to avoid false detection of the reed switch
- A long activation of the reed switch (between 3 to 6 seconds)
- A long time without activation of the reed switch (between 3 to 6 seconds)
- A long activation of the reed switch (between 3 to 6 seconds
The example video below demonstrates the operation.
Multiple operating modes
-
Shipping: The tracker is set to Shipping mode when leaving the factory, for safe transport and minimum power consumption. You need to activate it before first use as outlined
above. -
Motion tracking: Tracker reports real-time position only when motion is detected. This is the default configuration that you can discover by applying the instructions given in this guide. (very low power operating mode). The position request can be made from the geolocation backend platform.
-
Activity tracking: Monitor activity rate with embedded sensors.
-
Standby: The tracker sends periodically short LoRaWAN® messages, called heartbeat, at the configured interval. This provides periodic slots during which it is possible o send LoRaWAN commands to the tracker, such as configuration commands or on-demand positions (using the configuration set for “side operations”). For more nformation, see Abeeway Trackers Reference Guide.
Geolocation technologies
- GPS: For precise outdoor positioning
- Low Power-GPS (LP-GPS) : For power-ecient outdoor and daylight indoor positioning LPGPS is an assisted-GPS technology optimized specifically for LPWAN networks, patented by anyway. It dramatically reduces Time to First Fix, even in poor radio conditions, and results in a much-improved battery lifetime, particularly for indoor/outdoor mixed use cases when the GPS frequently gets out of sync or operates in low SNR conditions.
- Wi-Fi: For indoor and outdoor location services in urban areas, It leverages the Wi-Fi access point scanning capabilities of the compact tracker.
- BLE: For indoor location, for example as a complement to WiFi to precisely spot specific locations, for coarse location in a building (to identify rooms or danger/forbidden zones), or as main indoor location technology using server-side triangulation (provided by ThingPark X Location Engine)
Other features
- Temperature monitoring
- LoRaWAN® Class A radio
- Dust-proof and waterproof ( IP65 )
Standards and certifications
- LoRa Alliance: EU868, US915, AS923
WARNING
The tracker is resistant to water but must never be placed either
fully/partially submerged in water or under the influence of high-pressure
water spray jets for significantly long periods of time. To avoid water
entering in the casing, the tracker must not be placed upside down. The
warranty of the tracker is avoided if used incorrectly.
Edit on GitHub
Last Updated: 10/26/2021, 11:34:03 AM
https://docs.thingpark.com/thingpark-location/B-Feature- Topics/CompactTracker_C/
References
- ThingPark Location overview
- Compact tracker
- Documentation library
- Sign in to GitHub · GitHub
- Abeeway - Compact Tracker Magnets for Reed switch - ThingPark Market
- Technology - Abeeway