GGM Gastro 60 x 80 Stainless Steel Cabinet Refrigerator Freezers Instruction Manual
- June 12, 2024
- ggm gastro
Table of Contents
- GGM Gastro 60 x 80 Stainless Steel Cabinet Refrigerator Freezers
- Product Information
- Product Usage Instructions
- Safety Tips
- Introduction
- Pack Contents
- Installation
- Fitting the Shelves
- Operation Storing Food
- Cleaning, Care & Maintenance
- Cleaning the Condenser
- Troubleshooting
- Electrical Wiring
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GGM Gastro 60 x 80 Stainless Steel Cabinet Refrigerator Freezers
Product Information
- The refrigerator uses the R600a and R290 refrigerants.
- The housing or integrated structure of the appliance must be kept clear to prevent blockage of the openings.
- This refrigerator is environmentally friendly, and discarded electrical appliances should not be thrown away with household waste. Please actively contribute to resource conservation and environmental protection by returning this appliance to collection centers (if available).
Product Usage Instructions
To lock/unlock the doors, use the provided keys.
Do not use mechanical devices or other means, except those recommended by the manufacturer, to accelerate the defrosting process. Do not damage the cooling circuit. Do not use electrical appliances inside the food storage compartment, unless they are recommended by the manufacturer.
If the power cable is damaged, it should be replaced by the manufacturer, after-sales service, or a qualified technician to prevent any risks. Lamp repair and replacement should be carried out by qualified technicians with the power disconnected, using identical lamps. Only qualified technicians should perform extraordinary maintenance interventions.
For any warnings or instructions not mentioned here, refer to the user manual.
Safety Tips
- Position on a flat, stable surface.
- A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components or service panels on this product.
- Consult Local and National Standards to comply with the following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
- DO NOT use jet/pressure washers to clean the appliance.
- DO NOT use the appliance outside.
- DO NOT use this appliance to store medical supplies.
- DO NOT use electrical appliances inside the appliance (e.g. heaters, ice-cream makers etc.)
- DO NOT stand or support yourself on the base, drawers or doors.
- DO NOT allow oil or fat to come into contact with the plastic components or door seal. Clean immediately if contact occurs.
- Bottles that contain a high percentage of alcohol must be sealed and placed vertically in the refrigerator.
- Always carry, store and handle the appliance in a vertical position and move by holding the base of the appliance.
- Always switch off and disconnect the power supply to the unit before cleaning.
- Keep all packaging away from children. Dispose of the packaging in accordance with the regulations of local authorities.
- If the power cord is damaged, it must be replaced by an agent or a recommended qualified technician in order to avoid a hazard.
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your product.
Pack Contents
The following is included:
- Refrigerator or Freezer
- Shelves x 3 (Single)/ x 6 (Double)
- Keys x 2
- Instruction manual
- Shelf guides × 6 (Single) y 12 (Double)
- Waste water tray
We pride ourself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your dealer immediately.
Installation
Note: If the appliance has not been stored or moved in an upright position, let it stand upright for approximately 12 hours before operation. If in doubt allow the appliance to stand.
-
Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are thoroughly removed from all surfaces.
-
Maintain a distance of 20cm (7 inches) between the unit and walls or other objects for ventilation
Increase this distance if the obstacle is a heat source.
Note: Before using the appliance for the first time, clean the shelves and interior with soapy water. -
Set the brakes on the castors to keep the appliance in position OR Level the appliance by adjusting the screw feet.
WARNING
- Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- Do not damage the refrigerant circuit.
- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
The R600a and R290 refrigerant used by this refrigerator
Lock/Unlock the Doors
- A lock is fitted to the doors to ensure foodstuffs are kept secure within your appliance.
- Use the keys provided to lock/unlock the door
Fitting the Waste Water Tray
The waste water tray comes ready to fit to the underside of the appliance.
Slide the tray into the runners situated under the appliance.
Fitting the Shelves
- Place one set of shelf guides on either side of the cabinet at the desired height.
- Slide the shelf into place.
- Repeat for the remaining shelves.
Note: This is vital for ensuring correct drainage of condensation.
Operation Storing Food
To get the best results from your appliance, follow these instructions:
- Only store foodstuffs in the appliance when it has reached the correct operating temperature.
- Do not place uncovered hot food or liquid inside the appliance.
- Wrap or cover food where possible.
- Do not obstruct the fans inside the appliance.
- Avoid opening the doors for prolonged periods of time.
Turn On
- Close the door(s) of the appliance.
- Ensure the power switch is set to [O] and turn on at the socket.
- Switch on the Power I]. The current temperature within the appliance is displayed.
Manual Defrost
The appliance will automatically run a defrost cycle every six hours.
Note: The cycle starts from the time the appliance is initially powered up.
To manually defrost the appliance:
-
Press and hold the DEFROST button for 5 seconds.
-
The defrost cycle will start immediately and the Defrost LED illuminates. The defrost will last a maximum of 30 minutes.
Note: Starting a manual defrost also resets the automatic defrost timer. The next automatic defrost will start six hours after the manual defrost has finished. -
Waste water is collected in the waste water tray.
Cleaning, Care & Maintenance
- Switch off and disconnect from the power supply before cleaning.
- Clean the interior of the appliance as often as possible.
- Do not use abrasive cleaning agents. These can leave harmful residues.
- Clean the door seal with water only.
- Always wipe dry after cleaning.
- Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
- Take care when cleaning the rear of the appliance. Sharp edges can cut.
- An agent or qualified technician must carry out repairs if required.
Cleaning the Condenser
Periodically cleaning the condenser can extend the life of the appliance, We recommend that our agent or qualified technician clean the condenser.
Troubleshooting
If vour appliance develoos a fault. please check the following table before making a call to vour retailer.
Electrical Wiring
Appliances are supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard. The plug is to be connected to a suitable mains socket. Appliances are wired as follows:
- Live wire (coloured brown) to terminal marked L
- Neutral wire (coloured blue) to terminal marked N
- Earth wire (coloured green/yellow) to terminal marked E
- All appliances must be earthed, using a dedicated earthing circuit.
- If in doubt consult a qualified electrician.
- Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required they must be readily accessible.
Disposal
EU regulations require refrigeration product to be disposed of by specialist
companies who remove or recycle all gasses metal and plastic components.
Consult your local waste collection authority regarding disposal of your
appliance. Local authorities are not obliged to dispose of commercial
refrigeration equipment but may be able to offer advice on how to dispose of
the equipment locally.
Compliance
Parts have undergone strict product testing in order to comply with regulatory
standards and specifications set by international, independent, and federal
authorities.
Products have been approved to carry the following symbol:
WARNING
-
IN CASE THE SUPPLY CABLE IS DAMAGED, THE MANUFACTURER OR THE AFTER-SALES SERVICE. OR QUALIFIED TECHNICIAN SHALL REPLACE IT.IN
ORDER TO PREVENT ANY POSSIBLE RISK. -
THE LAMP REPAIR AND REPLACEMENT SHALL BE CARRIED OUT BY QUALIFIED TECHNICIANS. WITH POWER SUPPLY DISCONNECTED. REPLACE WITH IDENTICAL LAMPS.
-
ONLY QUALIFIED TECHNICIANS SHALL CARRY OUT THE EXTRAORDINARY MAINTENANCE INTERVENTIONS.
Disposal of packaging
- All packaging materials should be disposed of in an environmentally friendly way.
- The cardboard may be used as scrap paper. The protective foil and the foam cushions are CFC – free.
- Do not allow children to play with the packaging and destroy plastic bags safely.
- You can break or cut the cardboard into smaller pieces and give to a waste paper disposal service.
Environmental protection
Discarded electric appliances are recyclable and should not be discarded in
the domestic waste! Please actively support us in conserving resources and
protecting the environment by returning this appliance to the collection
centres (if available).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>