TIPTOP audio 258T Eurorack Module User Manual
- June 4, 2024
- TIPTOP audio
Table of Contents
258T Eurorack Module
User Manual
Two independent voltage-controlled oscillators. Each has one processing input,
a frequency modulation input, and a 1V/oct input.
Waveshapes, as well as frequency, can be voltage controlled. Model 258
oscillators feature low sine wave harmonic content, negligible settling error,
and high short and long-term stability, even with rapidly changing ambient
temperatures.
TRIMMERS:
There are three trimmers for each oscillator on the back of the module:
1V/oct is the octave tracking trimmer and is set at the factory using high-
precision instruments.
SHAPE is the trimmer that set the sine wave, for the lower harmonic content of
the sine wave.
VC WAVE SHAPE sets the response of the waveshaper to the incoming control
voltage. Both SHAPE and VC WAVE SHAPE trimmers are used to adjust the sine
wave purity.
Size: 18HP – Depth: 45mm – Power: +12V 70mA / -12V 40mA Eurorack 200 series
Documents / Resources
|
TIPTOP audio 258T Eurorack
Module
[pdf] User Manual
258T, Eurorack Module, 258T Eurorack Module
---|---