cisco Business 150AX Access Point User Guide
- June 3, 2024
- Cisco
Table of Contents
Business 150AX Access Point
User Guide
Thank you for choosing the Cisco Business 150AX Access Point.
This access point can be used to create a new Wi-Fi 6 wireless network, or
expand coverage of your existing Cisco Business Wireless (CBW) Wi-Fi 6
Network.
This Quick Start Guide will get you up and running in no time.
What’s in the Box
- Cisco Business 150AX Access Point
- Mounting Kit
- Ethernet Cable
- Quick Start Guide
- Technical Support Contact List
- Pointer Card China RoHS
- Compliance Information (for EU SKU only)
Product Features
- PoE (Power over Ethernet)-In Port (Ethernet Uplink Port)
- Disabled
- Kensington Lock
- Mode Button
- Security Screw Hole
- Mounting Bracket
First, You’ll Need…
- An active Internet connection.
- A mobile device with Wi-Fi capability (not connected to an active wireless network).
- Cisco Business Mobile app or a compatible web browser such as Microsoft Edge (ver. 10 or above), Safari (ver. 7 or above), Firefox (ver. 33 or above), or Chrome (ver. 38 or above).
- A PoE (Power over Ethernet) switch, router, or a PoE injector to supply power to the access point.
- A router or switch (to act as your DHCP Server).
Get Connected
-
Connect your access point via ethernet cable (provided) to a PoE LAN port on your switch or router. If you do not have a PoE switch or router you will need to use a PoE injector.
Setting
up a new network or adding to an existing network?
Set up a new network
If setting up a new network the device will begin initial boot up. The LED will cycle through patterns of green, red and off. This is normal and can take up to 6 minutes or longer. The device is not ready until the LED is solid green. Once this occurs you can proceed to “Get Configured”. -
Add to an existing CBW Wi-Fi 6 wireless network
Allow the access point to boot up and automatically update its firmware and configuration to match the existing network. This can take 10 minutes or more, and the LED will cycle through green, red, and off. This is normal. Once the LED is solid green the setup is complete and ready to be connected to the network. Once you are connected the LED turns blue.
Get Configured
Download the Cisco Business Mobile app
No computer is needed for setup, just use the app on your mobile phone.
Scan the QR code here to download the app or go to
cisco.com/go/cbapp and follow the installation
instructions.
Alternative: Web UI (Internet Browser) Setup
If you do not wish to use the Cisco Business Mobile app you can use the Web UI
for setup.
These instructions can be found online in the Web UI Setup Document.
To download the instructions see the “Get Support” section below.
Mounting and Grounding
Cisco Business Wireless access points can be mounted in several
configurations—on a suspended ceiling, on a hard ceiling or wall, or in the
plenum air space above a suspended ceiling.
Mounting instructions are located in the Administration Guide, see the “Get
Support” section below.
Get Support
For Cisco support and additional product documentation, including the Web UI
For setup Document and Administration Guide, visit:
https://cisco.com/go/cbw150ax
©2022 Cisco and/or its affiliates. All rights reserved. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>