BELL HOWELL 8573 LED Flexible Grow Light Instructions
- June 4, 2024
- BELL HOWELL
Table of Contents
BELL HOWELL 8573 LED Flexible Grow Light
OVERVIEW
- Adjustable Timer 3,6,9 hrs.
- Stands or Clips-On
- Mounting Bracket Included
INSTALLATION
Install the unit near a plant. Adjust the position of each light, if needed.
There are 3 ways to install the Bell+Howell Grow Burst:
- Squeeze the end to open the clip and install it on the edge of table, desk, etc.
- Insert the base of the unit into the mounting bracket. This will provide extra support when placed on flat surface.
- Install the mounting bracket to the desired surface by using the 4 screws (included).
Insert the base of the unit into the mounting bracket.
CONNECT TO POWER
-
Insert one end of the cable into the back of the
Bell+HowellP Grow Burst. -
Connect the unit to power (2 ways):
-
Insert the USB end into the power adapter (not included).
Use standard DC 5V 2A adapter. -
Insert the USE end into any USB port (computer, laptop, etc.)
USAGE
When the unit is turned off (by unplugging it or by pressing the power button), all previous settings get reset.
TO TURN ON/OFF
- Turn the power ON or OFF by pressing and holding the POWER button for 2 seconds.
- Tap the POWER button to select the number of lighting head: 3 heads/2 heads/1 head.
Keep tapping to cycle through.
TO CHANGE COLOR
- Press the button to cycle through: blue light/ red light / mixed light.
- Blue light is for vegetative growth, red light is for flowering growth.
TO ADJUST BRIGHTNESS
- Press the – or + to adjust brightness (8 dimming levels).
TO SET THE TIMER
NOTE: As Iong as the timer indicator light is ON, the selected timer will go ON and OFF automatically each day.
-
Once the lights are on, press the button once and the indicator light under will turn on. This will set the 3-hour timer.
-
If you need additional time, press the button again to select the 6-hour timer.
The indicator light under will turn on, This will set the 6-hour timer. -
If you need additional time, press the button again to select the 9-hour timer.
-
The indicator light under will turn on. This will set the 9-hour timer.
Example:
- Turn the light ON and set a 6H timer at 10 am. Once the 6 hours pass, the light will automatically turn OFF at 4 pm.
- If the timer setting remains the same, the light will automatically turn ON at 10 am the next day and automatically turn OFF at 4 pm each day. lt will remain the same color, brightness and light setting.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>