CHAINWAY P80 Industrial Tablet User Manual

: June 1, 2024
: CHAINWAY

Table of Contents

CHAINWAY P80 Industrial Tablet
Product Information
Product Usage Instructions
FAQs
FEATURE
Specification
Fingerprint (Optional)
Accessories
UHF Performance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CHAINWAY P80 Industrial Tablet

CHAINWAY-P80-Industrial-Tablet-product

Product Information

Specifications
- Dimensions: 250.8 x 152.0 x 15.0 mm / 9.87 x 5.98 x 0.59 in.
- Weight: 680 g / 23.99 oz.
- Display: 8” IPS LTPS 1920 x 1200
- Touch Panel: Corning Gorilla Glass, multi-touch panel, gloves and wet hands supported
- Power: Li-ion rechargeable 8700 mAh battery
- CPU: 2.0 GHz Octa-core
- RAM+ROM: 4 GB + 64 GB
- Expansion: Supports up to 256 GB Micro SDN card

Product Usage Instructions

Powering On/Off
- To power on the device, press and hold the power key until the screen lights up. To power off, press and hold the power key and follow on-screen prompts.
Data Capture
- The device supports various data capture options like UHF RFID, barcode scanning, NFC, and fingerprint recognition. Use the corresponding applications to utilize these features.
Connectivity
- The tablet supports WiFi, Bluetooth, and GPS functionalities. Navigate to settings to connect to available networks or devices.
Environmental Considerations
- Ensure the device operates within the specified temperature and humidity ranges to prevent damage. Refer to the user manual for detailed environmental guidelines.

FAQs

Q: How do I insert a SIM card?

A: To insert a SIM card, locate the slot designated for it on the device, gently insert the SIM card with the contacts facing down, and push until it clicks into place.

Q: Can I expand the storage capacity of the device?

A: Yes, you can expand the storage capacity by inserting a Micro SD card of up to 256 GB into the designated slot on the device.

Q: How do I enable fingerprint recognition?

A: Navigate to device settings, locate the security or fingerprint section, follow the on-screen instructions to register your fingerprint, and enable fingerprint recognition for secure access.

FEATURE

$CHAINWAY-P80-Industrial-Tablet-fig-1 $1$$

Chainway P80 with abundant functions is an Android 13 rugged tablet. With its powerful Octa-core CPU, 8-inch high definition screen, 8700 mAh battery and comprehensive data capture options like UHF RFID, barcode scanning, NFC, fingerprint recognition, etc., you can find this easy-to-deploy device a valuable helper to increase productivity in retail, logistics, warehousing, identity verification, etc.

$CHAINWAY-P80-Industrial-Tablet-fig-1 $2$$

Specification

Physical Characteristics

Dimensions| 250.8 x 152.0 x 15.0 mm / 9.87 x 5.98 x 0.59 in. ( for standard version )
Weight| 680 g / 23.99 oz. ( for the standard version )
Display| 8” IPS LTPS 1920 x 1200
Touch Panel| Corning Gorilla Glass, multi-touch panel, gloves and wet hands supported
Power| Main battery: Li-ion, rechargeable, 8700 mAh Standby: over 500 hours

Continuous use: over 10 hours (depending on user environment)

Charging time: 5-7 hours (with standard AC adaptor and USB cable)

Expansion Slot| 1 slot for Micro SIM card, 1 slot for Micro SIM / TF card, Optional dual PSAM card slots
Interfaces| USB 2.0 Type-C, OTG
Sensors| Gravity sensor; gyroscope; geomagnetic sensor; light / proximity sensor
Notification| Sound, LED indicator
Audio| 1 microphone; 1 speaker;
Keypad| 1 front key, 1 volume key, 1 power key, direction key (Optional)
Performance

CPU| 2.0 GHz Octa-core
RAM+ROM| 4 GB + 64 GB
Expansion| Supports up to 256 GB Micro SD card
Developing Environment

Operating System| Android 13; GMS&AER, 90-day security updates

Zero-Touch, FOTA, Soti MobiControl, SafeUEM supported

SDK| Chainway Software Development Kit
Language| Java
Tool| Eclipse / Android Studio
User Environment

Operating Temp.| -4 oF to 122 oF / -20 oC to 50 oC
Storage Temp.| -40 oF to 158 oF / -40 oC to 70 oC
Humidity| 5% RH – 95% RH non condensing
Drop

Specification

| Multiple 1.5 m / 4.92 ft. drops to concrete across the operating temperature range
Tumble

Specification

|

500 x 0.5 m / 1.64 ft falls at room temperature

Sealing| IP65 per IEC sealing specifications
END| ±15 KV air discharge, ±8 KV conductive discharge
Communication

WLAN| Support 802.11 a/b/g/n/ac/d/e/h/i/k/r/v,2.4G/5G dual-band, IPV4,IPV6;
Fast roaming: PMKID caching, 802.11r, OKC;
Operating Channels: 2.4G(channel 1~13), 5G(channel 36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128, 132,136,140,144,149,153,157,161,165), Depending on local regulations;
Security and Encryption: WEP, WPA/WPA2-PSK(TKIP and AES), WAPI- PSK—EAP-TTLS, EAP-TLS, PEAP-MSCHAPv2, PEAP-LTS, PEAP- GTC, etc.
WWAN| 2G: 850/900/1800/1900MHz, GPRS, EDGE
3G: CDMA EVDO: BC0

WCDMA: B1/B2/B5/B8

4G: TFDD-LTE: B13/4B/B2/3B83/B/B349/B54/0B/B7/4B18/B12/B13/B17/B20/B28
Vo- LTE| Support Vo-LTE HD video voice call
Bluetooth| Bluetooth 5.1
GNSS| GPS/AGPS, GLONASS, BeiDou, Galileo, internal antenna
Data Collection

Camera
Rear Camera| 13 MP Autofocus with flash
Front Camera| 5 MP
Barcode Scanning (Optional)

Scan Engine| Zebra SE4710, Honeywell HS7

1D Symbologies

| UPC/EAN, Code128, Code39, Code93, Code11,

Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.

2D Symbologies

| PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch, Postal (KIX), etc.
UHF RFID (Optional)
UHF
Frequency| 865-868 MHz / 920-925 MHz / 902-928 MHz

For detailed specifications, please check the P80 UHF part.

NFC

Frequency| 13.56 MHz
Protocol| ISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc.
Chips| M1 card (S50, S70), CPU card, NFC tags, etc.
Range| 0-4 cm

Fingerprint (Optional)

Accessories

Accessories (See details in Accessory Guide)

$CHAINWAY-P80-Industrial-Tablet-fig-1 $3$$ Notice: Product specifications are subject to change without prior notice.

Model: P80
Update Date: 2024-03-22

UHF Performance

UHF Delivers Better-than-ever UHF Performance

Specification

UHF (Optional)
Engine| CM710-1 module based on Impinj E710
Frequency| 865-868 MHz / 920-925 MHz / 902-928 MHz
Protocol| EPC C1 GEN2 / ISO18000-6C
Antenna| Circular polarization ( 3 dBi)
Power| 1W (30 dBm, +5 dBm to +30 dBm adjustable)
2W Optional (33dBm, for Latin America, etc.)
R/W range| Up to 10 m (open outdoors, Impinj MR6 tag);
Fastest Read Rate| 900+ tags/sec

Ranges and rates depend on tags and environment.

Biometrics Accurate Fingerprint Reading and Facial Recognition

$CHAINWAY-P80-Industrial-Tablet-fig-1 $5$$

Specification

Fingerprint (Optional)

Option 1
Sensor| TCS1 Capacitive
Sensing Area (mm)| 12.8 × 18.0
Resolution (dpi)| 508 dpi, 8-bit greylevel
Certifications| FIPS 201, STQC
Format Extraction| ISO 19794, WSQ, ANSI 378, JPEG2000
Fake Finger Detection| Support by SDK
Security| AES, DES key encryption of the host communication channel
Option 2

Sensor| TLK1NC02
Sensing Area (mm)| 14.0 X 22.0
Resolution (dpi)| 508dpi, 256-bit greylevel
Certifications| FIPS 201, FBI
Format Extraction| ISO19794, WSQ, ANSI 378, JPEG2000
Fake Finger Detection| Support by SDK
Security| AES, DES key encryption of the host communication channel
Option 3

Sensor| Optical Morpho CBM-E3
Sensing Area (mm)| 14.0 X 22.0
Resolution (dpi)| 500 dpi, 256 greylevel
Certifications| FIPS PIV IQS / ISO 19794-4, MINEX & FIPS 201 complaint, STQC
Format Extraction| ISO 19794-2/4, WSQ, ANSI 378, etc.
Fake Finger Detection| Latex, GeLatin, Plasticine, Kapton, Transparent Film, Silicone, Rubber, Play-doh, Graphite Or Paper
Security| FIPS 140-2 level 2, multiple security methods available, including image and template encryption, template signature, secure tunnelling, etc.