BELL HOWELL C P -DGL03 Multi-Directional LED Light User Manual
- October 27, 2023
- BELL HOWELL
Table of Contents
READ INSTRUCTIONS BEFORE INSTALLING
Multi-Directional LED Light
User Manual Model # C P -DGL03
Hold the light at the base to install into the light socket. Do NOT use the arms to screw the light into the socket. Do NOT over tighten the Light when installing
Multi-Directional LED light is great for use in garages, basements,
warehouses, workshops, etc.
Includes
1 Multi-Directional LED Light
Instructions
- Installs into any pre-existing E26 light fixture with bulb socket.
- Turn off the power to the light fixture you are planning to use.
- Using a pre-existing E26 light fixture with bulb socket. Unscrew the current bulb from the socket.
- Screw in the base of the Multi-Directional LED Light. Then turn the light fixture back on for the Multi Directional LED Light to illuminate.
- Multi-Directional design allows the adjustable arms to be positioned in different angles up to 90°for wider lighting angle.
DO NOT OVER TIGHTEN
For Customer Service & Warranty see inside details
Specification
Power: 60W
Input Voltage: AC120V/60Hz
Lumen: 6000lm
Color Temperature: 5000K Daylight
Base Type: E26
Material: Aluminum + PC
Dimension: 12x 12x 6 Inches
Weight: 0 . 7 8 L b s
Caution
- DO NOT over-tighten when installing into light fixture
- When installing or removing turn at the base, not at the arms
- Turn power off before installation or removing the LED light.
- Please check the voltage before installing the bulb to make sure the voltage is correct.
- Please do not disassemble or modify the LED light for any purpose.
- Do not use the LED light with dimmers.
- Discontinue use if damaged.
- For indoor use only
- WARNING-This product contains high intensity LED lights. To prevent permanent eye damage, do not look directly at the LED lights.
- This device is not intended for use with emergency exits and not for emergency lighting.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Any changes or modification to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
Responsible Party： KMS INC, 811 E Waterman Wichita KS 67202, 1-800-752-5262
6 Month Limited Warranty
The manufacturer warrants this unit against defects in materials and
workmanship on functional parts, for a period of 6 months from the original
date of purchase. Your sales receipt showing the date of purchase of the
product if your proof of purchase. Keep sales receipt in a safe place for
future reference. this product is made with the highest quality materials and
is warranted to be free from defects in materials and workmanship at the time
of purchase. This limited warranty applies to products manufactured or
disbursed by the manufacturer, are delivered in the continental United States,
and extends to the original purchaser, or gift recipient. This warranty
becomes valid at the time of purchase and terminates either by the specified
time frame listed above and or owner transfer. Any refunds or monetary
compensations must be claimed through the place of purchase (retailer), and
not through the manufacturer. Any extended warranties (Warranties that cover
above and beyond this manufacturer warranty) that are sold through a retailer
or third party, are not directly correlated with this product’s limited
warranty, and may be redirected to said retailer or third party for coverage.
This warranty extends through the manufacturer of the product and covers
functional parts only. Cosmetics are not covered, unless unequivocally
determined it is a workmanship defect. Shipping damage should be addressed
with the shipping company, retailer, or place of purchase, not the
manufacturer unless the manufacturer was the direct shipper. The
manufacturer’s sole obligation under this warranty shall be limited to
furnishing the original purchaser replacement parts for units deemed
repairable by the supplier’s warranty department. The purchaser is responsible
for ensuring any parts shipped or returned if desired. The purchaser is
responsible to prepay any shipping charges (both ways) including, but not
limited to taxes and duties. All exchanged parts and products replaced under
this warranty will become the property of the manufacturer. The manufacturer
reserves the right to change manufactures of replacement parts or products for
use, to cover any existing warranty. The purchaser may be asked to provide the
supplier with proof of purchase documents including the date of purchase. Any
evidence of alteration, erasing or forgery of proof of purchase documents will
be justified cause to void this limited warranty. Products, in which the
serial number has been defaced or removed, are not eligible for warranty
coverage. This warranty does not apply if the unit has been subject to
negligence, fabrication, misuse, abuse or repairs, alteration by non-
manufacturer authorized personnel, inappropriate installations, or any case
beyond the control of the manufacturer. Examples of warranty invalidation may
also include, but are not limited to: Use of lacquer or paints in (and around)
the unit Electrical requirement deficiencies (see manual for specific
electrical requirements) Use with extension cords/timers/surge protectors/GFCI
Outdoor Applications Normal wear /tear/weathering Pet / Consumer accidents
The manufacturer shall not be liable for any loss due to use (or misuse) of
the unit or other incidental or consequential costs, expenses, or damage
without irrefutable foundations. Under no circumstances shall the manufacturer
or any of its representatives be held liable for injury to any person or
damage to any property, however arising. Any implied warranty shall have
duration equal of the applicable warranty stated above. Specifications are
subject to change without notice or obligation. This limited warranty gives
the original purchaser specific legal rights. Other rights may vary from state
to state.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>