BELL HOWELL CP-DGL01-8RD Multi-Directional Motion Sensor LED Light Instruction Manual

BELL HOWELL CP-DGL01-8RD Multi-Directional Motion Sensor LED Light

Hold the light at the base to install into the light socket or socket

extension

• Do NOT use the arms to screw the light into the socket or the socket extension.
• Do NOT over tighten the Light or socket extension when installing.

Multi-Directional LED light is great for use in garage, basement, warehouse, workshops, etc.

Includes

Do not over tighten.

• 1 Motion Sensor Multi-Directional LED Light
• 1 Optional E26 Socket Extension

Instructions

1. Turn off the power to the light fixture you are planning to use.

2. Install into any pre-existing E26 light fixture with bulb socket.

3. Screw in the base of the Multi Directional LED Light.

4. Then turn the light fixture back on for the Multi Directional LED Light to illuminate.

5. Multi Directional design allows the adjustable arms to be positioned in different angles up to 90°for wider lighting angle.

6. Use E26 socket extension for additional clearance.

7. 

• Wall switch must be in the ON position, switch the Multi Directional LED light to ON the motion sensor starts to work, the Multi Directional LED light will turn on automatically when it detects movement with-in range.
• The light will turn off automatically after approximately 90 seconds when there is no movement detected.
• Switch the Multi Directional LED light to  OFF to turn off the motion sensor function.
• The Multi Directional LED light will function like a normal light.
• You can use the wall switch to turn the Multi Directional LED light off and on.

Specification

• Power: 80W±10%
• Input Voltage: AC120V/60Hz
• Lumen: 8000lm±10%
• Color Temperature: 5000K Daylight Working
• Mode: motion sensor + always on
• Motion Sensor Distance: approximately 16ft ~26ft
• Standby Time: Approximately 90 seconds
• Base Type: E26
• Material: Aluminum + PC
• Dimension: 12.3 x 12.3 x 3.2 Inches
• Weight: 1.10 LBS

Caution

• DO NOT Over-tighten when installing into light fixture.
• When installing or removing, turn at the base, not at the arms.
• Turn power off before installation or removing the led light.
• Please check the voltage before installing the bulb to make sure the voltage is correct.
• Please do not disassemble or modify the led light for any-purpose.
• Do not use the LED light with dimmers.
• Discontinue use if damaged.
• For indoor use only.

WARNING
This product contains high intensity LED lights. To prevent permanent eye damage, do not look directly at the LED lights. This device is not intended for use with emergency exits or not for emergency lighting. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning
Any changes or modification to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Month Limited Warranty
The manufacturer warrants this unit against defects in materials and workmanship on functional parts, for a period of 6 months from the original date of purchase. Your sales receipt showing the date of purchase of the product if your proof of purchase. Keep sales receipt in a safe place for future reference. this product is made with the highest quality materials and is warranted to be free from defects in materials and workmanship at the time of purchase. This limited warranty applies to products manufactured or disbursed by the manufacturer, are delivered in the continental United States, and extends to the original purchaser, or gift recipient. This warranty becomes valid at the time of purchase and terminates either by the specified time frame listed above and or owner transfer. Any refunds or monetary compensations must be claimed through the place of purchase retailer, and not through the manufacturer. Any extended warranties Warranties that cover above and beyond this manufacturer warranty that are sold through a retailer or third party, are not directly correlated with this product’s limited warranty, and may be redirected to said retailer or third party for coverage. This warranty extends through the manufacturer of the product and covers functional parts only. Cosmetics are not covered, unless unequivocally determined it is a workmanship defect. Shipping damage should be addressed with the shipping company, retailer or place of purchase, not the manufacturer unless the manufacturer was the direct shipper. The manufacturer’s sole obligation under this warranty shall be limited to furnishing the original purchaser replacement parts for units deemed repairable by the supplier’s warranty department. The purchaser is responsible for ensuring any parts shipped or returned if desired. The purchaser is responsible to prepay any shipping charges (both ways) including, but not limited to taxes and duties. All exchanged parts and products replaced under this warranty will become the property of the manufacturer. The manufacturer reserves the right to change manufactures of replacement parts or products for use, in order to cover any existing warranty. The purchaser may be asked to provide the supplier with proof of purchase documents including the date of purchase. Any evidence of alteration, erasing or forgery of proof of purchase documents will be justified cause to void this limited warranty. Products, in which the serial number has been defaced or removed, are not eligible for warranty coverage. This warranty does not apply if the unit has been subject to negligence, fabrication, misuse, abuse or repairs, alteration by non-manufacturer authorized personnel, inappropriate installations or any case beyond the control of the manufacturer. Examples of warranty invalidation may also include, but are not limited. The manufacturer shall not be liable for any loss due to use or misuse of the unit or other incidental or consequential costs, expenses or damage without irrefutable foundations. Under no circumstances shall the manufacturer or any of its representatives be held liable for injury to any person or damage to any property, however arising. Any implied warranty shall have duration equal of the applicable warranty stated above. Specifications are subject to change without notice or obligation. This limited warranty gives the original purchaser specific legal rights. Other rights may vary from state to state.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>