ESBE BPD-3 BUILDING PRODUCT DECLARATION User Manual

: June 4, 2024
: ESBE

Table of Contents

ESBE BPD-3 BUILDING PRODUCT DECLARATION
Basic data
Supplier information
Product information
Contents
Production phase
Distribution of finished product
Construction phase
Usage phase
Demolition
Waste management
Indoor environment
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ESBE BPD-3 BUILDING PRODUCT DECLARATION

ESBE-BPD-3-BUILDING-PRODUCT-DECLARATION-product

Basic data

Product identification	Document ID 18.11

Product name

GMA 3×1

| Product no/ID designation 6600xxxx| Product group

6600

New declaration Revised declaration| In the case of a revised declaration
Has the product been changed?| The change relates to
No| Yes| Changed product can be identified by
Drawn up/revised on (date) 2021-11-19| Inspected without revision on (date)
Other information:

Supplier information

Company nameEsbe AB	Company reg. no/DUNS no

Address Bruksgatan 22

SE-330 21 Reftele

Product information

Country of final manufacture Germany/ Austria| If country cannot be stated, please state why
---|---
Area of use Hot Water- and Heating installations
Is there a Safety Data Sheet for this product?| Not relevant| Yes| No
In accordance with the regulations of the Swedish Chemicals Agency, please state:| Classification Labelling| Not relevant
Is the product registered in BASTA?| Yes| No
Has the product been eco-labelled?| Criteria not found| Yes| No| If “yes”, please specify:
Is there a Type III environmental declaration for the product?| Yes| No
Other information: see product data sheet at ESBES home page

At the time of delivery , the product comprises the following parts/components, with the chemical composition stated:

Constituent materials/ components| Constituent substances| Weight

% or g

| EG no/ CAS no (or alloy)| Classifi- cation| Comments
Steel| | 91%| 68467-81-2| |
Plastic| PP| 4%| 9003-07-0| |
Brass| | 5%| 12597-71-6| | SV HC-

subject (lead)

| | | | |
---|---|---|---|---|---
Other information:
If the chemical composition of the product after it is built in differs from that at the time of delivery, the content of the

finished built in product should be given here. If the content is unchanged, no data need be given in the following table.

Constituent materials/ components| Constituent substances| Weight

% or g

Production phase

Resource utilisation and environmental impact during production of the item is reported in one of the following ways:

1) Inflows (goods, intermediate goods, energy etc) for the registered product into the manufacturing unit , and the outflows (emissions and residual products) from it, i.e. from “gate-to-gate”.

2) All inflows and outflows from the extraction of raw materials to finished products i.e. “cradle-to-gate”.

3) Other limitation. State what:

Residual product

| ****

Waste code

| ****

Quantity

| Proportion recycled| ****

Comments

Distribution of finished product

Does the supplier put into practice a system for returning load carriers for the product?| Not relevant| Yes| No
---|---|---|---
Does the supplier put into practice any systems involving multi-use packaging for the product?| Not relevant| Yes| No
Does the supplier take back packaging for the product?| Not relevant| Yes| No
Is the supplier affiliated to REPA?| Not relevant| Yes| No
Other information:

Construction phase

Are there any special requirements for the product during storage?| Not relevant| Yes| No| If “yes”, please specify:
---|---|---|---|---
Are there any special requirements for adjacent building products because of this product?| Not relevant| Yes| No| If “yes”, please specify:
Other information:

Usage phase

Does the product involve any special requirements for intermediate goods regarding operation and maintenance?| Yes| No| If “yes”, please specify:
---|---|---|---
Does the product have any special energy supply requirements for operation?| Yes| No| If “yes”, please specify:
Estimated technical service life for the product is to be entered according to one of the following options, a) or b):
a) Reference service life estimated as being approx.| 5

years

| 10

years

| 15

years

| 25

years

| >50

years

| Comments
b) Reference service life estimated to be in the interval of 10-30 years
Other information:

Demolition

Is the product ready for disassembly (taking apart)?| Not relevant| Yes| No| If “yes”, please specify:
---|---|---|---|---
Does the product require any special measures

to protect health and environment during demolition/disassembly?

| Not relevant| Yes| No| If “yes”, please specify:
Other information:

Waste management

Is it possible to re-use all or parts of the product?| Not relevant| Yes| No| If “yes”, please specify:
---|---|---|---|---
Is it possible to recycle materials for all or parts of the product?| Not relevant| Yes| No| If “yes”, please specify:

Metal

Is it possible to recycle energy for all or parts of the product?| Not relevant| Yes| No| If “yes”, please specify:

Insulation shell

Does the supplier have any restrictions and

recommendations for re-use, materials or energy recycling or waste disposal?

| Not relevant| Yes| No| If “yes”, please specify:
Enter the waste code for the supplied product Metal: EWC 200140, Plastics: EWC 200139 Paper EWC 200101
Is the supplied product classed as hazardous waste?| Yes| No
If the chemical composition of the product differs after having been built in from that which it had at the time of

delivery, meaning that another waste code is given to the finished built in product, then this should be entered here. If it is unchanged, the following details can be omitted.

Enter the waste code for the built in product

Is the built in product classed as hazardous waste?| Yes| No
Other information:

Indoor environment

(To add a new green row, select and copy an entire empty row and paste it in).

When used as intended, the product gives off the following emissions:| The product does not have any emissions
---|---
Type of emission| Quantity [µg/m 2 h] or [mg/m 3 h]| Method of measurement| Comments

4 weeks