VERTOY Remote Control Dinosaur Toys Instruction Manual
- June 17, 2024
- VERTOY
Table of Contents
3 + INSTRUCTIONS
Remote Control Dinosaur Toys
SIMULATED
DINOSAUR
REMOTE CONTROL FUNCTION TOUCH SENSING
PARENT-CHILD TOYS SERES
Please keep these instructions for future reference as they contain important
information
BUILDING STEPS
Building Steps
- Align the rear leg with the rear leg hole 1 , fix it with screws and cover it with a lid.
- Align the rear leg with the rear leg hole 2 fix it with screws and cover it with a lid.
- Put the forelimbs into the front fixed hole of the dinosaur’s main body.
TOUCH SENSING
- There is a smart sensor on the back of the dinosaur, touching it will trigger a 6-second swing spray.
- Touch the smart sensor to trigger a 6-second walk forward and spray.
FUNCTION INTRODUCTION OF REMOTE CONTROL
TO PLAY
FUNCTION SUPPLEMENT
-
Remote control switch key
Long press to close, press again to open. -
Spray Function
Open the black soft rubber lid, add water and close it. -
The Dino Charging
• Insert the USB charging cable port into the dinosaur abdomen charging port.
• Plug the USB port into a computer USB port or other adapter (such as a phone charger)
• Dinosaur charging 2.5 hours to full capacity.
• Before charging, the dinosaur belly on/off key should be turned off, and the red indicator light is on until the electricity is full.
• The battery is fully charged will automatically stop charging to protect the lithium battery.
• Remove the USB charging cable, reset, continue to play/ play again.