ESBE 3F Series Mixing Valve Instruction Manual
- June 4, 2024
- ESBE
Table of Contents
ESBE 3F Series Mixing Valve
OPERATION
The ESBE series F is a valve made of cast iron for use in heating and cooling
installations.
The mixing proportions are adjusted manually with a handle or, in
automatically controlled systems, by means of an actuator. Suitable actuators
are ESBE series ARC300 or series 90. The valve can also be equipped with ESBE
controllers series 90C and CRA120.
Valve series 3F is available in dimensions DN 20-150 with flanged connections.
The scale is graded on both sides and can be turned, allowing a choice of
mounting positions. Operation
angle = 90°.
SERVICE AND MAINTENANCE
All major parts are replaceable. The shaft seal consist two o-rings, one of which can be replaced without the need for draining down the system or dismantling the valve. However, before doing so, the system must be depressurized.
INSTALLATION EXAMPLES
All the examples of installations can be reversed. The valve position plate is graded on both sides and should at the installation be fitted in the correct position as shown in the instruction for installation.
VALVE 3F DESIGNED FOR
- Heating
- Comfort cooling
SUITABLE ACTUATORS AND CONTROLLERS
- Series 90
- Series ARC300
- Series 90C
- Series CRA120
TECHNICAL DATA
Dimension
Flanged connection PN6, standard EN 1092-2
The flat-sided spindle top (as well as the indicator of the knob) points towards the sleeve position.
SERIES 3F
Art. No. | Reference | DN | Kvs* | A | B | C | D | E | F | G | Weight [kg] |
---|---|---|---|---|---|---|---|---|---|---|---|
11100100 | 3F 20 | 20 | 12 | 70 | 140 | 40 | 82 | 65 | 90 | 4×11,5 | 3,5 |
11100200 | 3F 25 | 25 | 18 | 75 | 150 | 40 | 82 | 75 | 100 | 4×11,5 | 4,0 |
11100300 | 3F 32 | 32 | 28 | 80 | 160 | 40 | 82 | 90 | 120 | 4×15 | 5,9 |
11100400 | 3F 40 | 40 | 44 | 88 | 175 | 40 | 82 | 100 | 130 | 4×15 | 6,8 |
11100600 | 3F 50 | 50 | 60 | 98 | 195 | 50 | 92 | 110 | 140 | 4×15 | 9,1 |
11100800 | 3F 65 | 65 | 90 | 100 | 200 | 52 | 95 | 130 | 160 | 4×15 | 10,0 |
11101000 | 3F 80 | 80 | 150 | 120 | 240 | 63 | 106 | 150 | 190 | 4×18 | 16,2 |
11101200 | 3F 100 | 100 | 225 | 132 | 265 | 73 | 116 | 170 | 210 | 4×18 | 21,0 |
11101400 | 3F 125 | 125 | 280 | 150 | 300 | 80 | 123 | 200 | 240 | 8×18 | 27,0 |
11101600 | 3F 150 | 150 | 400 | 175 | 350 | 88 | 130 | 225 | 265 | 8×18 | 37,0 |
SELECTION GUIDE ESBE ACTUATORS
The figures below are intended only as a recommendation for ordinary installations. In some applications the valve may require even more actuator torque.
MAXIMUM DIFFERENTIAL PRESSURE
Actuator
| ARA600| 90| ARC300
Torque| 6 Nm| 15 Nm| 30 Nm
DN| max. ∆P [kPa]
20|
50
|
50
|
50
25
32
40
50
65| —
80| —
100| —| 30
125| —|
15
150| —
MAXIMUM FLOW
Actuator| ARA600| 90| ARC300
Torque| 6 Nm| 15 Nm| 30 Nm
DN| max. flow [m3/h]
20| 8,5| 8,5| 8,5
25| 13| 13| 13
32| 20| 20| 20
40| 31| 31| 31
50| 42| 42| 42
65| —| 64| 64
80| —| 110| 110
100| —| 120| 160
125| —| 110| 200
150| —| 160| 280
VALVE CHARACTERISTICS
DIMENSIONING
HEATING SYSTEMS (RADIATOR OR UNDERFLOOR HEATING SYSTEMS)
Start with the heat demand in kW (e.g. 200 kW) and move vertically to the
chosen ∆t (e.g. 10°C).
Move horizontally to the shaded field (pressure drop of 3-15 kPa) and select
the smaller Kvs-value (e.g. 60).
A mixing valve with a suitable Kvs-value will be found in the respective
product description.
OTHER APPLICATIONS
Make sure maximum ∆P is not exceeded (see line D in the graphs below). ©
Copyright. Rights reserved to make alterations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>