Neomounts PLASMA-C100D Monitor Ceiling Mount Instructions
- June 4, 2024
- Neomounts
Table of Contents
Neomounts PLASMA-C100D Monitor Ceiling Mount
PARTS
- Install the ceiling plate
- Install the adapter brackets
- Attach the VESA plate to the screen and use spacers if necessary
- Route the cables and place the cover
- Adjust the mount to your desired position and adjust the torque
CAUTION
- To ensure safety. please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquakes or typhoons.
- is recommended that the mount de installed by named personnel only
- At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
- Please carefully inspect the area where the mount is tO be installed that
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe installation, irst check the structure of the wall, ceiling or floor and select a secure mounting location.
- The wall, celing or floor should be strong enough to sustain weight or at least four times of the display and mount combined. Ihe mounting location must be able to withstand earhquake or other strong shock.
- Do not modity any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling or tloor type and installation of the mount, the warranty of the product shall only cover the body of the mount. Ihe warranty period of the product is years.
- Please consult the Englisn language manual Tor any dispute on conditions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>