TOURATECH CRF1100L Engine protection for Honda Instruction Manual
- June 4, 2024
- Touratech
Table of Contents
TOURATECH CRF1100L Engine protection for Honda Instruction Manual
We recommend having the accessory parts fitted by a specialist workshop.
Achtung I Caution I Attention
Note I Remarque I Nota I
I Warning I
Liquid I Liquide I
I Torque I Couple I
Template I Pochoir I Dima I Plantilla
I 2 Persons I 2 I 2 Personas
I Original motorcycle part I Piece
These instructions are written based on our current state of knowledge.
Information is provided without any guarantee as to its accuracy. Subject to
technical modifications.
The order of assembly steps must be followed.
Touratech accepts no liability for incorrectly fitted parts and resulting
material damage or personal injury!
Please observe applicable road vehicle (construction and use) regulations as
well as
EC/ECE Directives and applicable laws in your country. If parts are fitted
which require inspection and/or approval after fitting, take your vehicle to a
testing station immediately and have the vehicle papers updated.
Check and if necessary tighten all bolted connections after 50 km. Standard
tightening torques in Nm for bolted connections with strength class 8.8. For
special tightening torques refer to your specialist workshop! Please take into
account that fitting panniers, crash bars, foot peg lowering kits (rider and
pillion),Kickstand enlargmentplate, front spoilers and engine guards may
restrict the bike’s lean angle!
If modifications are made to the fairing, stem, handlebar, fairing parts,
etc., ensure that electrical wiring, brake lines, accelerator and clutch
cables are refitted correctly. Check clearance, both sides with full steering
lock.
Always disconnect the battery when working on the electrics!
We recommend cutting protective film to size and applying it to impact areas
that are likely to be chipped by stones.
Work on the brake system and suspension should always be carried out by a
specialist workshop.
The maximum load on luggage racks is 5 kg! Luggage racks Zega Pro TC is 10 kg!
If other original accessories or aftermarket accessories are used, ensure
clearance1 fitment and do not come into contact with other parts!
Apply conventional lubricant to stainless steel bolts prior to assembly.
PDF fitting instructions also can be downloaded from the Touratech webshop.
TOURATECH NEW IDEAS FOR MOTORBIKES
instructions I Instructions de montage Honda CRFl 1 00L Africa Twin ADV Sports
November 2021 by: Touratech GmbH, Germany
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>